856 research outputs found
Security and Privacy Issues in Wireless Mesh Networks: A Survey
This book chapter identifies various security threats in wireless mesh
network (WMN). Keeping in mind the critical requirement of security and user
privacy in WMNs, this chapter provides a comprehensive overview of various
possible attacks on different layers of the communication protocol stack for
WMNs and their corresponding defense mechanisms. First, it identifies the
security vulnerabilities in the physical, link, network, transport, application
layers. Furthermore, various possible attacks on the key management protocols,
user authentication and access control protocols, and user privacy preservation
protocols are presented. After enumerating various possible attacks, the
chapter provides a detailed discussion on various existing security mechanisms
and protocols to defend against and wherever possible prevent the possible
attacks. Comparative analyses are also presented on the security schemes with
regards to the cryptographic schemes used, key management strategies deployed,
use of any trusted third party, computation and communication overhead involved
etc. The chapter then presents a brief discussion on various trust management
approaches for WMNs since trust and reputation-based schemes are increasingly
becoming popular for enforcing security in wireless networks. A number of open
problems in security and privacy issues for WMNs are subsequently discussed
before the chapter is finally concluded.Comment: 62 pages, 12 figures, 6 tables. This chapter is an extension of the
author's previous submission in arXiv submission: arXiv:1102.1226. There are
some text overlaps with the previous submissio
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Improving Multicast Communications Over Wireless Mesh Networks
In wireless mesh networks (WMNs) the traditional approach to shortest path tree based multicasting is to cater for the needs of the poorest performingnode i.e. the maximum permitted multicast line rate is limited to the lowest line rate used by the individual Child nodes on a branch. In general, this meansfixing the line rate to its minimum value and fixing the transmit power to its maximum permitted value. This simplistic approach of applying a single multicast rate for all nodes in the multicast group results in a sub-optimal trade-off between the mean network throughput and coverage area that does not allow for high bandwidth multimedia applications to be supported. By relaxing this constraint and allowing multiple line rates to be used, the mean network throughput can be improved. This thesis presents two methods that aim to increase the mean network throughput through the use of multiple line rates by the forwarding nodes. This is achieved by identifying the Child nodes responsible for reducing the multicast group rate. The first method identifies specific locations for the placement of relay nodes which allows for higher multicast branch line rates to be used. The second method uses a power control algorithm to tune the transmit power to allow for higher multicast branch line rates. The use of power control also helps to reduce the interference caused to neighbouring nodes.Through extensive computer simulation it can be shown that these two methods can lead to a four-fold gain in the mean network throughput undertypical WMN operating conditions compared with the single line rate case
Traffic eavesdropping based scheme to deliver time-sensitive data in sensor networks
Due to the broadcast nature of wireless channels, neighbouring sensor nodes may overhear packets transmissions from each other even if they are not the intended recipients of these transmissions. This redundant packet reception leads to unnecessary expenditure of battery energy of the recipients. Particularly in highly dense sensor networks, overhearing or eavesdropping overheads can constitute a significant fraction of the total energy consumption. Since overhearing of wireless traffic is unavoidable and sometimes essential, a new distributed energy efficient scheme is proposed in this paper. This new scheme exploits the inevitable overhearing effect as an effective approach in order to collect the required information to perform energy efficient delivery for data aggregation. Based on this approach, the proposed scheme achieves moderate energy consumption and high packet delivery rate notwithstanding the occurrence of high link failure rates. The performance of the proposed scheme is experimentally investigated a testbed of TelosB motes in addition to ns-2 simulations to validate the performed experiments on large-scale network
Towards QoS provisioning in a heterogeneous carrier-grade wireless mesh access networks using unidirectional overlay cells
Proceedings of: 6th International ICST Conference on Heterogeneous Networking for Quality, Reliability, Security and Robustness, QShine 2009 and 3rd International Workshop on Advanced Architectures and Algorithms for Internet Delivery and Applications, AAA-IDEA 2009, Las Palmas, Gran Canaria, November 23-25, 2009The visibility and success ofWireless Mesh Network (WMN)
deployments has raised interest among commercial operators in this technology.
Compared to traditional operator access networks WMNs have
the potential to offer easier deployment and flexible self-reconfiguration
at lower costs. A WMN-type architecture considered as an alternative
for an operator access network must meet similar requirements such as
high availability and guaranteed QoS in order to support triple-play content
provisioning. In this paper we introduce an architecture of such a
Carrier-grade Wireless Mesh Access Network (CG-WMAN). We then
present our contribution, an approach to seamlessly integrate unidirectional
broadcast cells (i.e. DVB-T) into such a CG-WMAN. This allows
higher layer protocols to utilize broadcast cells like regular mesh links,
where beneficial for a given payload and receiver distribution. We then
present a typical use case and discuss for which combinations of traffic
type, user distribution and QoS requirements the use of longer range
broadcast technologies can help to improve the overall CG-WMAN performance
in terms of throughput and reliability.European Community's Seventh Framework ProgramPublicad
WiLiTV: A Low-Cost Wireless Framework for Live TV Services
With the evolution of HDTV and Ultra HDTV, the bandwidth requirement for
IP-based TV content is rapidly increasing. Consumers demand uninterrupted
service with a high Quality of Experience (QoE). Service providers are
constantly trying to differentiate themselves by innovating new ways of
distributing content more efficiently with lower cost and higher penetration.
In this work, we propose a cost-efficient wireless framework (WiLiTV) for
delivering live TV services, consisting of a mix of wireless access
technologies (e.g. Satellite, WiFi and LTE overlay links). In the proposed
architecture, live TV content is injected into the network at a few residential
locations using satellite dishes. The content is then further distributed to
other homes using a house-to-house WiFi network or via an overlay LTE network.
Our problem is to construct an optimal TV distribution network with the minimum
number of satellite injection points, while preserving the highest QoE, for
different neighborhood densities. We evaluate the framework using realistic
time-varying demand patterns and a diverse set of home location data. Our study
demonstrates that the architecture requires 75 - 90% fewer satellite injection
points, compared to traditional architectures. Furthermore, we show that most
cost savings can be obtained using simple and practical relay routing
solutions
- …