Electroflotation of precipitated phosphate from synthetic solution

Abstract

<div><p>ABSTRACT The phosphate recovery from a 20 mg L-1 Na2HPO4 solution through precipitation with Ca(OH)2 followed by electroflotation was evaluated. X-ray diffraction and particle size measurements indicated that the precipitates were a mixture of hydroxyapatite and calcium-deficient hydroxyapatite, with size ranging from 3 to 10 μm. Electroflotation with Na-oleate as surfactant was used to recover the precipitates. The surfactant adsorption was evaluated through zeta potential measurements. The influence of Na-oleate concentration, pH and bubble size on phosphate recovery was investigated. In the absence of Na-oleate, a phosphate recovery of 50% was achieved, while in the presence of 20 mg L-1 of Na-oleate it was increased to 90%, at pH 11. The phosphate recovery also increased with Ca(OH)2 concentration increase and bubble size decrease, reaching 100% at 300 mg L-1 Ca(OH)2 and bubble size around 39 µm.</p></div

Similar works

Full text

thumbnail-image

FigShare

redirect
Last time updated on 12/02/2018

This paper was published in FigShare.

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.