Czech Technical University in Prague

Digital Library of the Czech Technical University in Prague
Not a member yet
    63969 research outputs found

    Financial Analysis of a Company

    No full text
    Bakalářská práce se věnuje problematice finanční analýzy podniku. Je rozdělena na teoretickou a praktickou část. V teoretické části jsou uvedeny základní informace k finanční analýzy, její uživatelé a metody, které lze využít při její aplikaci. Informace pro vypracování teoretické části byly čerpány především z odborné literatury. V praktické části je provedena analýza konkrétní firmy za pomocí metod popsaných v teoretické části. Následně jsou shrnuty a zhodnoceny výsledky analýzy a doporučeny kroky pro zlepšení finanční situace podniku. K vypracování praktické časti byly použity údaje z účetních závěrek společnosti z let 2019 až 2023.This bachelors thesis explores how financial analysis can support a company in understanding and improving its financial performance. It is divided into two key sections: a theoretical part and a practical part. The theoretical section introduces the basic principles of financial analysis, describes its typical users and outlines commonly used methods. This part is based mainly on academic literature. The practical section applies these methods to a spedific company, providing an analysis of its financial performance and offering recommendations for improvement. The analysis is based on financial data from the years 2019 to 2023

    Service Dog and Its Utilization in Emergency Services

    Get PDF
    Tato bakalářská práce se zabývá analýzou a komparací využití služebních psů u složek IZS v České republice. Předmětem této práce je na základě vlastností psa a výcviku, porovnat využití služebních psů u jednotlivých složek IZS České republice se zahraničím. Teoretická část práce charakterizuje IZS, pojmy a organizace spojené s kynologií, plemena psů využívaná pro službu, způsoby jejich využití, zákonnou úpravu, výchovu a výcvik. Praktická část je zaměřena na porovnání vlastností psů, metod výcviku a způsobů využití na základě kvalitativního výzkumu formou rozhovorů s psovody z vybraných složek IZS České, Slovenské a Polské republiky. Výzkum se snaží odpovědět na otázky, zda existují rozdíly ve využití psů mezi zeměmi, čím jsou dány, jaké jsou preference plemen a výcvikových metod. Výstupem je zhodnocení efektivnosti využití služebních psů u IZS s ohledem na zjištěné rozdíly a podobnosti. Ze získaných dat byly utvořeny přehlednější tabulky s výsledky. Prostřednictvím analýzy byly zjištěny velmi mále rozdílnosti, především jen v zákonné úpravě a atestech. Efektivnost využití služebních psů je ovlivněna více faktory, ale dá se říct, že jejich efektivnost je nenahraditelná.This bachelor's thesis deals with the analysis and comparison of the utilization of service dogs by the Integrated Rescue System in the Czech Republic. The subject of this thesis is to compare the utilization of service dogs by individual components of the Integrated Rescue System in the Czech Republic with foreign countries, based on the dog's characteristics and training. The theoretical part of the thesis characterizes the Integrated Rescue System, concepts and organizations related to cynology, dog breeds used for service, their methods of use, legal regulations, upbringing, and training. The practical part focuses on comparing the characteristics of dogs, training methods, and ways of utilization based on qualitative research in the form of interviews with dog handlers from selected components of the Integrated Rescue System of the Czech Republic, Slovakia, and Poland. The research seeks to answer questions about whether there are differences in the utilization of dogs between countries, what causes these differences, and what the preferences are regarding breeds and training methods. The output is an evaluation of the effectiveness of the utilization of service dogs within the Integrated Rescue System, considering the identified differences and similarities. Clearer tables with results were created from the obtained data. Through the analysis, very few differences were found, mainly only in legal regulations and certifications. The effectiveness of the utilization of service dogs is influenced by several factors, but it can be said that their effectiveness is irreplaceable

    AJAX-Based Form Generation Library

    Get PDF
    Tato bakalářská práce se zaměřuje na návrh a implementaci knihovny v jazyce TypeScript pro dynamické generování formulářů pomocí AJAXu a konfigurace v jazyce JSON. Teoretická část zkoumá vhodné nástroje a osvědčené přístupy, porovnává existující knihovny a identifikuje klíčová omezení v oblastech validace, přizpůsobení a dokumentace. Na základě této analýzy je navrženo lehké a modulární řešení, které podporuje konfiguraci pomocí schémat, podmíněné zobrazení polí, validaci za běhu a integraci s moderními frameworky. Implementace zahrnuje validační modul, uchovávání stavu formuláře, zpracování chyb a adaptér pro React. Řešení je předvedeno prostřednictvím demonstrační aplikace, která ukazuje integraci s Reactem a dynamické chování ve scénáři blízkém reálnému použití. Práce je zakončena zhodnocením, nakolik navržená knihovna odpovídá potřebám vývojářů při tvorbě dynamických formulářů.This thesis focuses on the design and implementation of a TypeScript library for dynamic form generation using AJAX and JSON configuration. The theoretical part explores best tools and practices, compares existing libraries, and identifies key limitations related to validation, customization, and documentation. Based on this analysis, the thesis proposes a lightweight, modular solution that supports schema-driven configuration, conditional fields, runtime validation, and integration with modern frameworks. The implementation includes a validation engine, state persistence, error handling, and a React adapter. The solution is demonstrated through a demo application showcasing React integration and dynamic behavior under real-world conditions. The thesis concludes by evaluating how well the library meets the needs of developers building dynamic forms

    Platform for Creating Interactive Learning Materials

    No full text
    Tato diplomová práce se věnuje analýze, návrhu a implementaci platformy pro tvorbu interaktivních studijních materiálů, jejímž cílem je zvýšit aktivní zapojení studentů do výuky. Klíčové části platformy jsou postaveny na architektuře Vue, NestJS a využívají WebSockets pro synchronizaci prezentací v reálném čase. Podporuje skriptování pomocí komunitních rozšíření a umožňuje nejen tvorbu a prezentaci výukových materiálů, ale i jejich sdílení, společnou editaci a sledování prezentací na zařízeních studentů. Součástí projektu je také prezentační web a technická dokumentace. Aplikace byla nasazena do produkčního prostředí a ověřena uživatelským testováním se studenty i učiteli, doplněným o automatizované testy.This thesis focuses on the analysis, design and implementation of a platform for the creation of interactive learning materials aimed at increasing active student engagement in learning. The key parts of the platform are using Vue, NestJS and also WebSockets for real-time synchronization of presentations. It supports scripting with community extensions and allows not only creating and presenting learning materials, but also sharing, collaborative editing and viewing presentations on students' devices. The project also includes a presentation website and technical documentation. The application has been deployed in a production environment and validated by user testing with students and teachers, supplemented by automated tests

    A tool for styling and exporting UI primitives for designers and developers

    Get PDF
    Tato diplomová práce se zabývá návrhem a implementací webového nástroje pro stylování a export UI primitiv s cílem zjednodušit spolupráci mezi designéry a vývojáři. Výsledné řešení umožňuje designérům upravovat vizuální podobu základních UI primitiv ve webové aplikaci a následně je přenést do prostředí Figmy pomocí vlastního pluginu. Vývojářům pak CLI nástroj nabízí možnost vygenerovat z těchto návrhů odpovídající kód do svých projektů.This thesis focuses on the design and implementation of a web-based tool for styling and exporting UI primitives in order to facilitate collaboration between designers and developers. The resulting solution allows designers to modify the visual appearance of basic UI primitives in a web application and then transfer them to the Figma environment using a custom plugin. The CLI tool then offers developers the possibility to generate the corresponding code from these designs into their projects

    User research and UX review of the I3T app. Design and prototyping to improve the usability of the I3T app.

    No full text
    Práce se zabývá vylepšením použitelnosti programu Interactive Tool for Teaching Transformations (I3T), který slouží jako výuková pomůcka při vysvětlování geometrických transformací v počítačové grafice. Cílem práce bylo navrhnout a následně ověřit úpravy uživatelského rozhraní, které zvýší intuitivnost ovládání, sníží kognitivní zátěž studentů a zajistí pozitivní uživatelskou zkušenost, čímž bude podpořena motivace studentů k využívání nástroje během výuky. Na základě rešerše v oblasti použitelnosti a uživatelského designu byla zvolena kvalitativní metoda testování použitelnosti s uživateli a princip iterativního návrhu. V úvodní fázi bylo provedeno testování s cílem identifikovat klíčové problémy v interakci uživatelů s aplikací. Na základě zjištěných nedostatků byly navrženy konkrétní úpravy, které byly konzultovány a dále rozvíjeny ve spolupráci s vývojovým týmem I3T. Následně byl zahájen cyklus iterativního testování, v jehož průběhu byly navržené úpravy ověřovány a dále rozvíjeny s cílem postupně odstraňovat dříve identifikované nedostatky, reagovat na nově nalezené problémy a celkově zlepšovat uživatelské rozhraní aplikace. Výsledkem práce je přehlednější a efektivněji ovladatelná aplikace, která na základě zvolené metriky dosáhla zlepšení ve vybraných kategoriích o 30-60%. Součástí práce jsou také doporučení pro další rozvoj aplikace se zaměřením na zvyšování uživatelské přívětivosti.The Thesis focuses on improving the usability of the Interactive Tool for Teaching Transformations (I3T), an educational tool designed to support the explanation of geometric transformations in computer graphics. The aim of the thesis was to propose and subsequently verify user interface modifications that enhance intuitive control, reduce students cognitive load, and provide a positive user experience, thereby encouraging students to use the tool during their learning process. Based on research in the field of usability and user-centered design, a qualitative usability testing method with users and the principle of iterative design were chosen. In the initial phase, usability testing was conducted to identify key issues in user interaction with the application. Based on the identified challenges, specific improvements were proposed, which were further developed in collaboration with the I3T development team. This was followed by a cycle of iterative testing, during which the proposed modifications were verified and further refined to gradually eliminate previously identified issues, respond to newly discovered problems, and continuously improve the application's user interface. The outcome of this thesis is a more user-friendly and efficiently operable application which achieved improvements of 30-60% in selected categories based on the chosen metric. The thesis also includes recommendations for future development in the area of usability

    A Comparative Analysis of the Effectiveness of Cognitive Behavioural Therapies and Educational Programmes in the Process of Resocialisation of Convicted Persons in Czech Prison Ins

    No full text
    Tato bakalářská práce je zaměřena na komparativní analýzu kognitivně-behaviorálních terapií a výchovných programů, které jsou využívány v procesu resocializace odsouzených osob v českých vězeňských zařízeních. Práce je zpracována s cílem poskytnout přehled o dané problematice a seznámit se základními pojmy souvisejícími s tématem. V teoretické části jsou představeny základní pojmy, jako je kriminalita, příčiny kriminálního chování, socializace, prizonizace a resocializace. Je popsán také vězeňský systém České republiky a uvedeny jsou vybrané terapeutické a výchovné metody, které jsou ve výkonu trestu odnětí svobody uplatňovány Praktická část je založena na kvalitativním výzkumu, který byl proveden formou polostrukturovaných rozhovorů s odborníky z vězeňského prostředí. Z rozhovorů byly zjišťovány postoje respondentů k využívání kognitivně-behaviorální terapie a výchovných programů, a to zejména z hlediska jejich efektivity, přínosů a omezení při práci s odsouzenými osobami. Na základě analýzy získaných dat je provedeno srovnání těchto přístupů a jsou formulována doporučení pro jejich další využití. Výsledky mohou přispět k hlubšímu porozumění efektivity resocializačních metod a k jejich efektivnějšímu uplatnění v českém vězeňském systému.This bachelors thesis focuses on a comparative analysis of cognitive-behavioral therapies and educational programs used in the process of resocialization of convicted individuals in Czech prison facilities. The aim of the thesis is to provide an overview of the issue and to introduce the basic concepts related to the topic. The theoretical part presents fundamental terms such as crime, causes of criminal behavior, socialization, prisonization, and resocialization. It also describes the prison system of the Czech Republic and outlines selected therapeutic and educational methods applied during the prison sentence. The practical part is based on qualitative research conducted through semi-structured interviews with professionals from the prison environment. The interviews examined the respondents approach toward the use of cognitive-behavioral therapy and educational programs, particularly in terms of their effectiveness, benefits, and limitations when working with convicted individuals. Based on the analysis of the collected data, a comparison of these approaches is made, and recommendations for their further use are formulated. The results may contribute to a deeper understanding of the effectiveness of resocialization methods and to their more efficient application within the Czech prison system

    Video-based estimation of heart rate and blood pressure

    Get PDF
    Tato diplomová práce se zabývá monitorováním životních funkcí pomocí videa se zaměřením na odhad srdeční frekvence a krevního tlaku pomocí dálkové fotopletysmografie (rPPG). Tradiční metody měření životních funkcí vyžadují fyzický kontakt s pacientem, což přináší riziko infekce, způsobuje nepohodlí a omezuje možnosti nepřetržitého monitorování. Přístupy založené na videu nabízejí přesvědčivou bezkontaktní alternativu tím, že detekují jemné fyziologické signály prostřednictvím běžných kamer. Výzkum prezentovaný v této práci systematicky porovnává devět různých nesupervizovaných metod extrakce pulzů (CHROM, POS, GREEN, GRGB, ICA, PCA, LGI, PBV a OMIT) ve čtyřech oblastech zájmu obličeje (čelo, levá tvář, pravá tvář a nos), přičemž integruje tři analytické oblasti (časovou oblast, frekvenční oblast a Kalmanův filtr). Na základě komplexního vyhodnocení 3 075 analytických oken od 50 subjektů práce identifikuje metodu CHROM aplikovanou na oblast čela s integrací Kalmanova filtru jako optimální konfiguraci, která dosahuje průměrné absolutní chyby 6,93 BPM. Pro odhad krevního tlaku je vyvinut multimodální přístup kombinující měření doby průchodu pulzu, metriky variability srdeční frekvence a antropometrické rysy s využitím algoritmu XGBoost. Výsledky ukazují, že bezkontaktní monitorování srdeční frekvence dosahuje přesnosti srovnatelné s komerčními nositelnými zařízeními, zatímco spolehlivé odhady krevního tlaku i nadále představují náročnou výzvu a vyžadují další zdokonalení. V celé práci jsou stanoveny biologické a fyzikální základy fotopletysmografie, zkoumá se kardiovaskulární fyziologie, interakce světla a tkáně a optické principy, které umožňují dálkovou detekci životních funkcí. Zkoumá životaschopnost této technologie pro různé zdravotnické a spotřebitelské aplikace, zabývá se metodologickými výzvami a zvažuje budoucí směry výzkumu, včetně přístupů supervizovaného učení a vývoje rozmanitějších datasetů, přičemž se zabývá také důležitými důsledky této nové technologie z hlediska ochrany soukromí a etiky.This diploma thesis investigates video-based vital sign monitoring focusing on heart rate and blood pressure estimation using remote photoplethysmography (rPPG). Traditional methods of measuring vital signs require physical contact with the patient, introducing infection risks, causing discomfort, and limiting continuous monitoring capabilities. Video-based approaches offer a compelling non-contact alternative by detecting subtle physiological signals through ordinary cameras. The research presented in this thesis systematically compares nine unsupervised distinct pulse extraction methods (CHROM, POS, GREEN, GRGB, ICA, PCA, LGI, PBV, and OMIT) across four facial regions of interest (forehead, left cheek, right cheek, and nose), while integrating three analytical domains (time domain, frequency domain, and Kalman filter). Through a comprehensive evaluation of 3,075 analysis windows from 50 subjects, the study identifies the CHROM method applied to the forehead region with Kalman filter integration as the optimal configuration, achieving a mean absolute error of 6.93 BPM. A multimodal approach combining pulse transit time measurements, heart rate variability metrics, and anthropometric features is developed using the XGBoost algorithm for blood pressure estimation. The results demonstrate that remote heart rate monitoring has achieved accuracy levels comparable to consumer-grade wearable devices, but blood pressure estimation remains challenging and requires further advancement. Throughout the work, the thesis establishes photoplethysmography's biological and physical foundations, examining cardiovascular physiology, light-tissue interactions, and optical principles that enable remote vital sign detection. It explores the viability of this technology for various healthcare and consumer applications, addresses methodological challenges, and considers future research directions, including supervised learning approaches and the development of more diverse datasets, while also addressing the important privacy and ethical implications of this emerging technology

    Introducing a foreign B2C brand to the Japanese market

    Get PDF
    Cílem této práce je poskytnout obecný přehled kulturních specifik, která ovlivňují japonský trh a spotřebitele, pokud jde o propagaci značky a zacházení s cizí image na japonském trhu. Hlavními zkoumanými tématy jsou chování a postoje japonských spotřebitelů, kulturní specifika propagace v Japonsku a zacházení s mezinárodní image jako USP v Japonsku. K demonstraci teoretických východisek jsou použity případové studie. Byly provedeny hloubkové rozhovory s cílem dále prozkoumat motivace, které stojí za atraktivitou cizokrajnosti v Japonsku. Cílem je identifikovat zásadní faktory pro řízení image značky a propagačních aktivit.Náklonost k zahraniční přitažlivosti byla podpořena spolu s dalšími zásadními faktory, pokud jde o komunikaci s japonskými spotřebiteli a propagační aktivity na japonském trhu.The aim of this thesis is to provide a general overview of the cultural specifics that influence the Japanese market and of the consumers when it comes to brand promotion and handling of a foreign image on the Japanese market. The main topics explored are Japanese consumer behavior and attitudes, cultural specifics of promotion in Japan, and the handling of foreignness as a USP in Japan. Case studies are used to demonstrate the theoretical background. In-depth interviews were conducted to further explore the motivations behind the appeal of foreignness in Japan. The aim is to identify essential factors for managing brand image and promotional activities.Affinity for foreign appeal was confirmed together with other crucial factors when it comes to communicating with Japanese consumers and promotional activities on the Japanese market

    Use of Physical Therapy to Influence Dysmenorrhea

    Get PDF
    Předmětem této bakalářské práce je zjistit, jak zvolené druhy fyzikální terapie, konkrétně transkutánní elektroneurostimulace (dále jen TENS) a lokální pozitivní termoterapie, ovlivňují intenzitu menstruačních bolestí a počet užitých analgetik u žen s primární dysmenoreou. V přehledu současného stavu jsou popsány anatomické struktury pánve, fyziologie a patologie menstruačního cyklu, etiologie primární dysmenorey a nefarmakologické metody užívané k její terapii. V metodické části jsou popsány vyšetřovací a terapeutické postupy uplatněné na probandky v této práci a metoda sběru dat. Speciální část obsahuje kineziologické rozbory všech probandek. Praktické části se zúčastnilo celkem deset žen, u kterých byla potvrzena primární dysmenorea. Ty byly rozděleny do skupin po pěti a na každou skupinu byl aplikován jiný typ fyzikální terapie za účelem snížení intenzity menstruačních bolestí. Dále je součástí této části hodnocení výzkumných skupin. Kapitola výsledky prezentuje shromážděná data v tabulkách a vyhodnocuje zlepšení sledovaných hodnot u jednotlivých probandek. Výsledky prokázaly, že obě zvolené metody fyzikální terapie vedou ke snížení menstruačních bolestí i počtu užitých analgetik. K většímu poklesu intenzity bolesti vedla TENS, počet užitých analgetik zaznamenal výraznější pokles u lokální pozitivní termoterapie.The subject of this bachelor thesis is to determine how selected types of physical therapy, specifically transcutaneous electrical nerve stimulation (TENS) and local positive thermotherapy, influence the intensity of menstrual pain and the number of analgesics used in women in primary dysmenorrhea. The review of the current state describes the anatomical structures of the pelvis, the physiology and pathology of the menstrual cycle, the etiology of primary dysmenorrhea and non-pharmacological methods used for its therapy. The methodology section describes the examination and therapeutic procedures applied to the subjects in this study and the data collection method. The special section contains the kinesiological analyses of all the subjects. Ten women, confirmed to have primary dysmenorrhea, participated in the practical part. They were divided into groups of five and a different type of physical therapy was applied to each group aimed at reducing the intensity of menstrual pain. This section also includes an evaluation of the research groups. The results chapter presents the collected data in tables and evaluates the improvement of the observed values in the individual subjects. The results showed that both selected methods of physical therapy led to a reduction in menstrual pain and the number of analgesics used. TENS led to a greater decrease in pain intensity, while the number of analgesics used showed a more significant reduction with local positive thermotherapy

    21,882

    full texts

    63,976

    metadata records
    Updated in last 30 days.
    Digital Library of the Czech Technical University in Prague is based in Czechia
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇