Abstract
Mineral wool waste is often considered unrecyclable, due to its difficult-to-process physical composition, and potential microbial contamination in the post-consumer products. Total mineral wool waste generated in the EU is growing continuously and is currently over 2.3 Mt annually, volumetrically accounting for the largest single waste source in some landfills. Here, we take advantage of the alkali-soluble nature of the rockwool waste, and use a combined mixing and dissolution method to prepare this otherwise unusable waste for geopolymerization, with up to 33 % inclusion in the final product. This mixing and dissolution step enables sufficiently high solids content to form a castable geopolymer paste, which forms a rigid matrix and a compressive strength of 12.8 MPa, sufficient for structural applications. This is the first time mineral wool waste has been used as a geopolymer precursor. FESEM and XRD analysis of the formed products were performed to verify geopolymer formation. Using the preparation reported here, otherwise unrecyclable mineral wool waste can potentially be turned into a valuable raw material for geopolymer materials
