ISMET 6 - General Meeting of the International Society for Microbial Electrochemistry and TechnologyUrine is rich in nitrogen and phosphorous and can considerably reduce domestic wastewater treatment
requirements if collected separately. Source separated urine has been shown to be suitable for energy
production and nutrients recovery in bioelectrochemical systems. However, there are still several
challenges to overcome mainly related to organics conversion into electrical energy.
In this study, anode performance of three microbial electrolysis cells (MECs) fed with urine using
different carbon anodes, Keynol (phenolic-based), C-Tex (cellulose-based) and PAN (polyacrylonitrilebased)
was compared. Two strategies were used to supply energy to the MECs; cell potential control
(1'
1 assay) and anode potential control (2"d assay). In both assays, the C-Tex MEC outperformed MECs
using Keynol and PAN. The C-Tex MEC with anode potential control at -0.300 V generated the highest
current density of 904 mA m·2
, which was almost 3-fold higher than the MEC with Keynol, and 8-fold
higher than the MEC with PAN. Analysis of anodes textural, chemical and electrochemical
characteristics suggest that the higher external surface area of C-Tex enabled the higher current density
generation compared to Keynol and PAN. The microbial composition on each anode and its correlation
with the generated current was also investigated. No significant differences were observed in microbial
diversity of the biofilm present in the studied anodes. Nonetheless, C-Tex had higher dominance of
bacteria belonging to Luctobucillu/es and Enterobucteriules suggesting its relation with higher current
generation.info:eu-repo/semantics/publishedVersio
