Dissertação de mestrado integrado em Engenharia CivilA escassez de recursos a nível ambiental, económico e até social levam a sociedade a procurar
novas alternativas. Neste sentido, a indústria da construção civil tem evoluído bastante na
aplicação de novos processos construtivos, bem como na aplicação e desenvolvimento de
novos materiais.
A indústria da construção civil tem desempenhado um papel bastante importante no
aproveitamento de subprodutos originários de outras indústrias. Nesse contexto, estudou-se
um material compósito utilizando como materiais, subprodutos originários de outras
indústrias. Com este estudo, procurou desenvolver-se alternativas às alvenarias
convencionais, através do desenvolvimento de um novo material para aplicações em paredes
divisórias não estruturais.
Na presente investigação, foram desenvolvidas para o compósito quatro misturas, utilizando
como materiais base, o gesso FGD e regranulado de cortiça, sendo utilizadas as fibras
vegetais de banana e sisal e fibras minerais de basalto e vidro como materiais de reforço do
material compósito.
O estudo consistiu numa análise física e mecânica, através da realização de uma campanha de
ensaios experimentais. Os diversos ensaios realizados consistiram na monitorização de
provetes através de ultrassons, caracterização do comportamento à flexão e compressão.
Foram efetuados ensaios para avaliação do processo de fratura e obtenção da energia de
fratura.
Os ensaios permitiram concluir que, apesar dos compósitos com fibras minerais revelarem um
melhor comportamento mecânico, os compósitos com fibras vegetais provaram ser também
uma boa alternativa de utilização em materiais compósitos para aplicação em blocos para fins
não estruturais.The shortage of environmental, economical and even social resources demands the increase
on research of new alternatives in the civil construction relating to new materials and
processes. On this basis, the building industry has been developing new construction
processes, as well as the study and application of new materials.
The building industry has been playing an important role on the reuse of by-products from
other industries. Therefore, a new composite material using by-products from other industries
is studied here.
This study aims at developing new alternatives to the conventional brickwork by testing a
new material for application in non-structural partition walls.
In the present investigation, four mixtures were studied based on the composite material
resulting from the combination of FGD plaster and regranulated cork and different types of
reinforcing with textile fibers, namely, Natural fibers of banana and sisal were used as well as
mineral fibers of glass and basalt.
The study consisted on a physical and mechanical analysis through a series of tests made in
the lab in order to get its characterization. The different experiments consisted on the
monitoring of test specimens through ultrasounds and behavior features under flexure and
compression with the obtainment of compressive strength, flexural strength and the elasticity
module. Additionally fracture energy tests were carried out aiming at characterizing the
fracture process of the composite materials and obtaining the fracture energy.
From the experimental campaign it was possible to conclude that mineral fibers perform
better than natural ones, but it is considered that these ones can be a solution for the
composite material to be applied in non-structural blocks