The management strategy for waste, in which the prevention of its produc-
tion is not yet feasible, should lead to the prioritization of the exploitation of its performance
potential, especially through re-use solutions. On this basis, a Research and Development
Project is under way in Portugal, which is intended to re-use the processed steel slags pro-
duced in the two Portuguese Companies. In this paper are presented the results obtained
by laboratory performance-related tests for geometrical, physical and mechanical properties
for the two Portuguese processed steel slags, named Inert Steel Aggregates for Construction
(ISAC). A special emphasis is made in terms of elastic modulus, comparing the two ISACs,
with two standard base course materials (granite and limestone aggregates). The laboratory
results show that the ISACs could be used in transportation infrastructures. It was also exper-
imentally observed that the two ISACs have better mechanical properties than the standard
unbound granular base course materials.University of Illinois at Urbana-Champaig, Illinois Center for Transportation, Center of Excellence for Airport Pavement Research, University of Illinois Railroad Engineering Program, Illinois Department of Transportation, U.S. Department of Transportation, Federal Aviation Administration, Association of American Railroads, Transportation Research Board, American Society of Civil Engineer
