CORE
🇺🇦
make metadata, not war
Services
Services overview
Explore all CORE services
Access to raw data
API
Dataset
FastSync
Content discovery
Recommender
Discovery
OAI identifiers
OAI Resolver
Managing content
Dashboard
Bespoke contracts
Consultancy services
Support us
Support us
Membership
Sponsorship
Community governance
Advisory Board
Board of supporters
Research network
About
About us
Our mission
Team
Blog
FAQs
Contact us
Contribution à la fiabilisation de la modélisation numérique de l’usinage de pièces en titane
Authors
Mariem YAICH
Publication date
28 November 2017
Publisher
HAL CCSD
Abstract
Machining of titanium alloys workpieces, especially in Ti6Al4V which has a low machinability, has always been among the major preoccupations of the companies in the aeronautics sector. However, it is difficult, basing only on experimental tests, to well understand the mechanisms involved during the chip formation. In fact, the use of reliable numerical models that allow the access to instantaneous and very localized physical quantities is required. The presented work consists on the increase of the cutting modeling reliability. 2D and 3D numerical simulations have been performed. The Johnson-Cook constitutive model and the damage evolution criterion have been used. The preliminary 2D study focused on the mesh effect, especially the size of the finite element, its type and its interpolation function, has highlighted the importance of a convenient discretization of the model that takes into account the machining computing cost. In addition, it has been shown that a suitable choice of the formulation type is crucial. The effect of the rheological and damage (initiation and evolution) coefficients on the chip formation (morphology, strain and temperature field) has been determined. Experimental orthogonal cutting tests of the Ti6Al4V at different cutting conditions have been performed. The dependency of the chip geometry and the efforts to the cutting speed and the feed rate has been studied. Experimental results have been used in the validation of the 3D numerical models, which allow a deep study of the chip formation process. This approach has allowed an accurately reproduction of the physical phenomena that occurs in the median plan of the workpiece as well as in its sides. The predicted results have highlighted that, even in the case of orthogonal cutting process, the chip formation is a 3D phenomenon. In order to increase the reliability of 3D numerical models, a new thermo-visco-plastic law has been proposed. This law, identified and implemented in the software Abqus® through the subroutine VUMAT©, has been used to model machining process of the Ti6Al4V. It has resulted in a notable improvement of numerical results.L’usinage des pièces en alliages de titane, notamment en Ti6Al4V qui a une faible usinabilité, a été toujours parmi les préoccupations majeures des entreprises du secteur de l’aéronautique. Toutefois, il est difficile, en se basant seulement à des essais expérimentaux, de bien comprendre les mécanismes participants à la formation du copeau. Il est alors nécessaire d’avoir recours à des modélisations numériques fiables permettant d’avoir accès à des grandeurs physiques instantanées et très localisées. Le travail présenté porte sur la fiabilisation de la modélisation de la coupe. Des simulations numériques 2D et 3D ont été mises en place. Le modèle de comportement de Johnson-Cook et le critère énergétique d’évolution d’endommagement ont été utilisés. L’étude préliminaire 2D de l’effet du maillage, notamment la taille, le type et la fonction d’interpolation des éléments finis, a souligné l’importance d’une discrétisation convenable du modèle qui tient compte du coût de calculs. De plus, il a été montré qu’un choix convenable du type de la formulation est crucial. L’effet des coefficients rhéologiques et d’endommagement (initiation et évolution) sur la formation du copeau (morphologie, champ de déformation et de température) a été déterminé. Des essais expérimentaux de la coupe orthogonale du Ti6Al4V à différentes conditions de coupe ont été effectués. La dépendance de la géométrie du copeau et des efforts à la vitesse de coupe et à l’avance a été étudiée. Les résultats expérimentaux ont été utilisés pour la validation des modèles numériques 3D qui permettent une étude fine de la formation du copeau. Cette approche a permis de reproduire fidèlement les phénomènes physiques se produisant au niveau du plan médian de la pièce tout en tenant compte de l’écoulement de la matière sur les bords. Les résultats prédits ont mis en évidence que, même dans le cas d’une coupe orthogonale, la formation du copeau est bien un phénomène 3D. Afin d’augmenter la fiabilité des modèles numériques 3D, une nouvelle loi thermo-viscoplastique a été proposée. Cette loi, identifiée et implémentée dans le logiciel Abaqus® à travers la routine VUMAT©, a été utilisée pour la simulation de l’usinage du Ti6Al4V. Elle a conduit à une amélioration notable des résultats numériques
Similar works
Full text
Available Versions
thèses en ligne de ParisTech
See this paper in CORE
Go to the repository landing page
Download from data provider
oai:HAL:tel-01746454v1
Last time updated on 18/04/2018
Archive Ouverte en Sciences de l'Information et de la Communication
See this paper in CORE
Go to the repository landing page
Download from data provider
oai:HAL:tel-01746454v1
Last time updated on 09/04/2018
Thèses en Ligne
See this paper in CORE
Go to the repository landing page
Download from data provider
oai:HAL:tel-01746454v1
Last time updated on 18/04/2018