The Oklahoma Cooperative Extension Service periodically issues revisions to its publications. The most current edition is made available.  For access to an earlier edition, if available for this title, please contact the Oklahoma State University Library Archives by email at libscua@okstate.edu or by phone at 405-744-6311.Biosystems and Agricultural Engineerin

Hamilton, Doug

Zhang, Hailin

SHAREOK repository

Division of Agricultural Sciences and Natural Resources  •  Oklahoma State UniversityBAE-1759Oklahoma Cooperative Extension Fact Sheets are also available on our website at: http://osufacts.okstate.eduOklahoma Cooperative Extension ServiceDoug HamiltonWaste Management SpecialistBiosystems and Agricultural EngineeringHailin ZhangWaste Nutrient Management SpecialistPlant and Soil Sciences  Knowing the solids content of a liquid or slurry is an important first step in understanding its physical properties. But, you might ask, “How can a liquid be solid?”  It’s a matter of terminology; “solid” and “solids” are two different things. Solid is a physical state of matter—ice is solid water.  Solids are the portion of a liquid or slurry that is left when the water is removed.  The amount of solids in wastewater and manure affects nutrient content, treatment processes and handling procedures.  This factsheet highlights definitions and rela-tionships among different types of solids in wastewater and manure. Solids and Moisture Content The Total Solids (TS) content of a sample is the mass of solids remaining after a sample has been dried in a 103oC oven for 24 hours, divided by the original mass of the sample. TS content of thick slurries are reported on a mass percent (%) basis.  For dilute slurries and liquids, TS is usually expressed as mass per volume, most commonly mg/l.  Units for solids content are discussed in more detail at the end of this fact sheet.  As TS concentration increases, and slurries start acting as semi-solids, the method of expressing solid/liquid relationship of mixtures switches from solids content to moisture content. Moisture content is defined as the mass of water in semisolid material divided by the wet mass of the material.  As long as you stick to a wet mass basis for determining solids and moisture content, the two values add up to 100:Moisture Content (%) + Solids Content (%) = 100  You will sometimes see solids content referred to as Dry Matter (DM) content.   Solids Fractions Total solids tell how many solids are in a liquid or slurry. It does not say much about what kind of solids are present. Total solids are broken into seven fractions based on two distinctions: 1. Are the solids suspended or dissolved in liquid? 2. Are the solids made of organic or inorganic material?Solids Content ofWastewater and ManureSuspended or Dissolved Solids Total Dissolved Solids (TDS) only appear as solid mate-rial when the sample is dried.  For example, solid salt (NaCl) and sugar dissolve in water and appear to be invisible. Dry the sample and crystals reappear.  Total Suspended Solids (TSS) are solids that remain intact when added to water.  Actually, the distinction between TDS and TSS is a little more complicated.  A particle is considered dissolved (TDS) if it can pass through a filter with 1.5 micron openings (1/17,000 inch).  If the 1.5 micron filter stops a particle, it is considered to be suspended (TSS).  This may seem arbitrary, and many particles smaller than 1.5 microns in size are definitely not dissolved (Figure 1).  This division between dissolved and suspended at 1.5 microns is actually quite practical, however. Given the density of natural materials, a particle with a diam-eter of 2 microns is the smallest size that is easily removed by settling.Figure 1.  Size of common particles found in liquids and slurries. BAE-1759-2Organic or Inorganic Solids To the layman, organic matter is material that is living or was once alive. Chemists determine whether a substance is organic or inorganic based on its carbon content.  The organic portion of wastewater or manure solids is the part that burns. The portion of TS that remains after heating at 550oC for 1 hour is called Total Fixed Solids (TFS); the portion lost during heating is Total Volatile Solids (TVS).   Sometimes the fixed solids content is called the Ash Content.  Volatile Solids is a measure of the organic matter content of a liquid or slurry, but you need to be careful; most organic materials have some ash content.  For instance, fresh manure is usually 80 percent volatile and 20 percent fixed.Relationship Between Solids Fractions The two distinctions can be defined mathematically as:  1. TS = TDS + TSS 2. TS = TFS + TVS But, we also could place the solids left on the filter used to determine TSS and the liquid passing through the filter into a 550oC furnace and divide them into fixed and volatile fractions: TSS = FSS (Fixed Suspended Solids) + VSS (Volatile Suspended Solids) TDS = FDS (Fixed Dissolved Solids) + VDS (Volatile Dissolved Solids) And the fixed and volatile fractions add up to give:TVS = VSS + VDSTFS =  FSS  + VSS The relationship between solids fractions is shown visu-ally in Figure 2.  The nice thing about relationship between fractions is if you know any four measurements, you can figure out the other four.  This is routinely done in the lab using the analyses TS/TVS and TSS/TVS: TS/TVS: A sample is placed into a crucible, dried in an oven at 103oC for 24 hours (TS), then placed in a furnace for one hour at 550oC (TVS). TSS/VSS:   A sample is filtered through a glass fiber filter with 1.5 micron openings.  The filter is dried in an oven at 103oC for 24 hours (TSS), and then placed in a 550oC furnace for 1 hour (VSS).   With TS, TVS, TSS and VSS in hand; numbers for TDS, TFS, FSS and FDS fall into place.Solids Species TS are divided into four characteristic fractions, sometimes called solids species:TS = VSS + FSS + VDS + FDS  These four fractions are called species because they define the nature of a liquid or slurry. VSS are the volatile portion of settleable organic particles. FSS are inorganic particles suspended in the liquid; such as undissolved salt crystals and silt particles. VDS are organic compounds dissolved in the liquid; such as sugars, fatty acids, and organic colloids. FDS are inorganic compounds dissolved in the liquid.  FDS and, more commonly, TDS are used to represent the salt content of a liquid.  Remember, FDS also may contain clay particles and the fixed portion of some microbial bodies.Species Visualization Figure 3 (page 3) shows a method of visualizing the character of a liquid or slurry sample using solids species. TS content is represented by the size (the area) of the circle. The circle is broken into four pie pieces representing VSS, VDS, FDS and FSS.  Concentration of each species is rep-resented by size of the slice.  Volatile solids are represented by green.  Fixed solids are red.  Suspended solids are dark, and dissolved solids are light colored. Figure 3 contains graphics of two samples: thin slurry of swine manure and liquid swine lagoon effluent.  Notice the circle of the manure sample is larger, since its TS concentration is nearly twice that of the effluent.  Volatile solids dominate the manure, while more than half of the effluent solids are fixed.  The effluent sample is almost all dissolved solids. Think of these two as a pair.  Swine manure is treated by the lagoon to become effluent.  Volatile solids are converted to carbon dioxide and methane. Undigested manure TSS and flocculated microbes settle as sludge.  The net result is effluent with lower total solids, higher salt content and lower organic matter than the manure.Figure 2.  Relationship between solids fractions.BAE-1759-3FSS (mg/l), 260FDS (mg/l), 2,100VSS (mg/l), 2,100VDS (mg/l), 1,700TFS=2,360 mg/lTDS=3,800 mg/lTSS=2,360 mg/lTVS=3,800 mg/lTS=6,160 mg/lSwine ManureFSS (mg/l), 100FDS (mg/l), 1,600VSS (mg/l), 800VDS (mg/l), 620TFS=1,700 mg/lTDS=2,220 mg/lTSS=900 mg/lTVS=1,420 mg/lFigure 3. Graphic visualization of solids contents and species. TS=3,120 mg/lSwine Lagoon EffluentUnits of Solids Content The solids contents of liquids and slurries are expressed on either a volume or mass basis.Mass per Volume Basis  Milligrams per liter (mg/l): The mass of solids contained in a sample are divided by the volume of the sample.  The most common units are mg/l, although in extra thick slurries, units are sometimes given in g/l.Mass per Mass Basis Parts per Million (ppm): If the density of the sample is assumed to be 1,000 g/l (this is the density of water), then units of mg/l convert directly to ppm – there are 1 million mg in a liter of water.  These units may not be valid for slurries, since the density of slurry may be greater than 1,000 g per liter. Percent Solids on Wet Basis (% wb):  The mass of solids in a sample are divided by the original weight of the sample and multiplied by 100.  This is usually the more ac-curate method for reporting solids contents of slurries.  An easy conversion to remember is: % wb = ppm x 10,000. Percent Solids on Dry Basis (% db):  These units are sometimes used when reporting the volatile solids content of a sample.  Essentially, this gives the percentage of TS that are volatile, since the dry content of the sample is, by definition, TS.Units of Moisture Content  Moisture content is almost always reported on a mass per mass basis, but there are two ways of reporting: percent wet basis and percent dry basis. Percent Moisture Content on Wet Basis (% wb):  The mass of liquids in a sample is divided by the original mass of the sample and multiplied by 100.  This is the most common method of reporting moisture content of food and agricultural products. Percent Moisture Content on Dry Basis (% db): The mass of liquids in a sample is divided by TS content and multiplied by 100.  These units are rarely used for food and agricultural products, but widely used in soil analyses.  Dry basis moisture content divided by dry bulk density gives the volumetric moisture content of a sample.ReferenceAmerican Public Health Association.  1998.  2540 Solids, pp 2-54 – 2-60 in Standard Methods for the Examination of Water and Wastewater, 20th ed. Washington DC: APHA.BAE-1759-4Oklahoma State University, in compliance with Title VI and VII of the Civil Rights Act of 1964, Executive Order 11246 as amended, Title IX of the Education Amendments of 1972, Americans with Disabilities Act of 1990, and other federal laws and regulations, does not discriminate on the basis of race, color, national origin, gender, age, religion, disability, or status as a veteran in any of its policies, practices, or procedures. This includes but is not limited to admissions, employment, financial aid, and educational services.Issued in furtherance of Cooperative Extension work, acts of May 8 and June 30, 1914, in cooperation with the U.S. Department of Agriculture, Robert E. Whitson, Director of Cooperative Exten-sion Service, Oklahoma State University, Stillwater, Oklahoma. This publication is printed and issued by Oklahoma State University as authorized by the Vice President, Dean, and Director of the Division of Agricultural Sciences and Natural Resources and has been prepared and distributed at a cost of 20 cents per copy. 1011 TEThe Oklahoma Cooperative Extension Service Bringing the University to You!for people of all ages.  It is designated to take the knowledge of the university to those persons who do not or cannot participate in the formal classroom instruction of the university.•	 It	utilizes	research	from	university,	government,	and other sources to help people make their own decisions.•	 More	than	a	million	volunteers	help	multiply	the	impact of the Extension professional staff.•	 It	dispenses	no	funds	to	the	public.•	 It	is	not	a	regulatory	agency,	but	it	does	inform	people of regulations and of their options in meet-ing them.•	 Local	programs	are	developed	and	carried	out	in	full recognition of national problems and goals.•	 The	 Extension	 staff	 educates	 people	 through	personal contacts, meetings, demonstrations, and the mass media.•	 Extension	has	the	built-in	flexibility	to	adjust	its	programs	and	subject	matter	to	meet	new	needs.	Activities shift from year to year as citizen groups and Extension workers close to the problems advise changes.The Cooperative Extension Service is the largest, most successful informal educational organization in the world. It is a nationwide system funded and guided by a partnership of federal, state, and local govern-ments that delivers information to help people help themselves through the land-grant university system.Extension carries out programs in the broad catego-ries of  agriculture, natural resources and environment; family and consumer sciences; 4-H and other youth; and community resource development. Extension staff members live and work among the people they serve to help stimulate and educate Americans to plan ahead and cope with their problems.Some characteristics of the Cooperative Extension system are:•		 The	 federal,	 state,	 and	 local	 governments	cooperatively share in its financial support and program direction.•	 It	is	administered	by	the	land-grant	university	as	designated by the state legislature through an Extension director.•	 Extension	programs	are	nonpolitical,	objective,	and research-based information.•	 It	provides	practical,	problem-oriented	education	

Solids content of wastewater and manure

https://shareok.org/bitstream/11244/49599/1/oksd_bae_1759_2011-10.pdf

Solids content of wastewater and manure

Abstract

Similar works

Full text

Available Versions

SHAREOK repository