Axel Glahn

Sigmar Wittig

Stefan Busam

Increasing efficiencies of modern aero-engines are accompanied by rising turbine inlet temperatures, pressure levels and rotational speeds. These operating conditions require a detailed knowledge of two-phase flow phenomena in secondary air and lubrication oil systems in order to predict correctly the heat transfer to the oil. It has been found in earlier investigations that especially at high rotational speeds the heat transfer rate within the bearing chambers is significantly increased with negative effects on the heat to oil management. Furthermore, operating conditions are reached where oil coking and oil fires are more likely to occur. Therefore, besides heat sources like bearing friction and churning, the heat transfer along the housing wall has to be considered in order to meet safety and reliability criteria. Based on our recent publications as well as new measurements of local and mean heat transfer coefficients, which were obtained at our test facility for engine relevant operating conditions, an equation for the internal bearing chamber wall heat transfer is proposed. Nusselt numbers are expressed as a function of non-dimensional parameter groups covering influences of chamber geometry, flow rates and shaft speed. [S0742-4795(00)02202-X]</jats:p

Internal Bearing Chamber Wall Heat Transfer as a Function of Operating Conditions and Chamber Geometry

Abstract

Similar works

Full text

Available Versions

Crossref