Localization has been considered as an important precondition for the location-dependent applications such as mobile tracking and navigation.To obtain specific location information, we usually make use of Global Positioning System(GPS), which is the most common plat- form to acquire localization information in outdoor environments. When targets are in indoor environment, however, the GPS signal is usually blocked, so we also consider other assisted positioning techniques in order to obtain accurate position of targets. In this thesis, three different schemes in indoor environment are proposed to minimize localization error by placing refer- ence nodes in optimum locations, combining the localization information from accelerometer sensor in smartphone with Received Signal Strength (RSS) from reference nodes, and utilizing frequency diversity in Wireless Fidelity (WiFi) environment.
Deployments of reference nodes are vital for locating nearby targets since they are used to estimate the distances from them to the targets. A reference nodes’ placement scheme based on minimizing the average mean square error of localization over a certain region is proposed in this thesis first and is applied in different localization regions which are circular, square and hexagonal for illustration of the flexibility of the proposed scheme.
Equipped with accelerometer sensor, smartphone provides useful information which out- puts accelerations in three different directions. Combining acceleration information from smart- phones and signal strength information from reference nodes to prevent the accumulated error from accelerometer is studied in this thesis. The combined locating error is narrowed by as- signing different weights to localization information from accelerometer and reference nodes.
In indoor environment, RSS technology based localization is the most common way to imply since it require less additional hardware compared to other localization technologies. However, RSS can be affected greatly by complex circumstance as well as carrier frequency. Utilization of diverse frequencies to improve localization performance is proposed in the end of this thesis along with some experiments applied on Software Defined Platform (SDR)
