Epari DR

Filipowicz D

Leahy M

MacLeod A

MacLeod AR

Pessoa RS

Synek A

Bone & Joint Research

English

Objectives Secondary fracture healing is strongly influenced by the stiffness of the bone-fixator system. Biomechanical tests are extensively used to investigate stiffness and strength of fixation devices. The stiffness values reported in the literature for locked plating, however, vary by three orders of magnitude. The aim of this study was to examine the influence that the method of restraint and load application has on the stiffness produced, the strain distribution within the bone, and the stresses in the implant for locking plate constructs. Methods Synthetic composite bones were used to evaluate experimentally the influence of four different methods of loading and restraining specimens, all used in recent previous studies. Two plate types and three screw arrangements were also evaluated for each loading scenario. Computational models were also developed and validated using the experimental tests. Results The method of loading was found to affect the gap stiffness strongly (by up to six times) but also the magnitude of the plate stress and the location and magnitude of strains at the bone-screw interface. Conclusions This study demonstrates that the method of loading is responsible for much of the difference in reported stiffness values in the literature. It also shows that previous contradictory findings, such as the influence of working length and very large differences in failure loads, can be readily explained by the choice of loading condition. Cite this article: A. MacLeod, A. H. R. W. Simpson, P. Pankaj. Experimental and numerical investigation into the influence of loading conditions in biomechanical testing of locking plate fracture fixation devices. Bone Joint Res 2018;7:111–120. DOI: 10.1302/2046-3758.71.BJR-2017-0074.R2. </jats:sec

A. MacLeod

A. H. R. W. Simpson

P. Pankaj

Crossref

Bone and Joint Research

Experimental and numerical investigation into the influence of loading conditions in biomechanical testing of locking plate fracture fixation devices

Experimental and numerical investigation into the influence of loading conditions in biomechanical testing of locking plate fracture fixation devices

Abstract

Similar works

Full text

Available Versions

Crossref

Edinburgh Research Explorer