Henderson, Robert

Renshaw, D.

Richardson, J.

English

Edinburgh Research Explorer

     Edinburgh Research Explorer                                      Dynamic Quenching for Single Photon Avalanche Diode ArraysCitation for published version:Richardson, J, Henderson, R & Renshaw, D 2007, 'Dynamic Quenching for Single Photon Avalanche DiodeArrays'. ???in??? 2007 International Image Sensor Workshop. ???pages??? 13.Link:Link to publication record in Edinburgh Research ExplorerDocument Version:Author final version (often known as postprint)Published In:2007 International Image Sensor WorkshopGeneral rightsCopyright for the publications made accessible via the Edinburgh Research Explorer is retained by the author(s)and / or other copyright owners and it is a condition of accessing these publications that users recognise andabide by the legal requirements associated with these rights.Take down policyThe University of Edinburgh has made every reasonable effort to ensure that Edinburgh Research Explorercontent complies with UK legislation. If you believe that the public display of this file breaches copyright pleasecontact openaccess@ed.ac.uk providing details, and we will remove access to the work immediately andinvestigate your claim.Download date: 20. Feb. 2015Dynamic Quenching for Single Photon Avalanche Diode Arrays Justin Richardson[1,2], Robert K. Henderson[1], David Renshaw[1] [1]The University of Edinburgh, Institute for Integrated Micro and Nano Systems, Edinburgh, U.K. [2]STMicroelectronics Imaging Division, Edinburgh, UK    SUMMARY  We propose the use of dynamic circuits for quenching avalanche events in single photon avalanche diode (SPAD) arrays. Two area-efficient, circuit solutions are presented in 0.35µm CMOS technology. These circuits contain no passive elements and consume shoot-through current only at triggering instants. The resulting reduction in power consumption and supply noise is essential to formation of large imaging arrays of SPADs. I. INTRODUCTION The quest for low-cost, high-performance SPAD arrays with integrated on chip signal processing for both time correlated and uncorrelated applications is now being driven by emerging markets such as biotechnology, automotive and 3D-imaging. Demand for increased accuracy and time resolution is shifting the focus of research from passive to active detector quenching mechanisms. This is due to the requirement that the two primary noise sources in single photon imaging systems, dark count rate (DCR) and pulse jitter be minimized. The former results in false triggering or arrival events while the latter causes ranging errors in 3D imaging systems. Both noise sources require averaging which is expensive in die area and processing speed.  Quenching is the process of halting a detector's avalanche breakdown and priming the device ready for the next photon arrival, and may be done passively[1], actively or a hybrid approach[3-8]. Active quenching employs feedback to improve system linearity due to the reduction of after-pulsing probability as well as reducing power consumption and crosstalk[3]. Quenching circuits with passive elements suffer from static consumption during quenching which is particularly undesirable for a large imaging array.  In this paper we present two circuits which exhibit purely dynamic power consumption ensuring reduced supply noise and SPAD self-heating effects. In the solutions presented here the detector is effectively isolated from the supply, thus reducing the potential for nonlinearities introduced by variations in excess bias voltage or inter-device crosstalk  II. QUENCH CIRCUITS Various integrated quench circuits are proposed in the literature: Most quenching solutions attempt to minimize the avalanche current duration due to self heating, afterpulsing probability and crosstalk issues [3].  A passive quench approach is employed in [2] using a MOS transistor for compactness. Passive quenching suffers from long recharge time. Such methods consume power for the duration of this period, and therefore can suffer self heating effects and longer dead times. In large uncooled detector arrays this may dramatically increase DCR. References [3],[5] discuss hybrid approaches for larger single  detectors, utilising a passive quench resistor and monostable based active quench/reset control. This circuit would be unsuitable for large arrays due to decreased fill factor and power consumption. References [4], [5] [6] begin to introduce the concept of using the basic CMOS thyristor [2] in a SPAD based detector concept, with logic control being done externally. Again a hybrid quench approach is used. Reference [7] utilises a passive/active quench hybrid with fixed built in delay active reset, although the active reset path uses some passive components so may suffer from higher power consumption. Reference [8] has no passive elements and a feedforward active avalanche control, but consumes static current for the duration of the breakdown pulse and requires external logic for precharging. Most work on integrated quench circuits apart from [1,6] addresses single detector systems. In general these are unsuitable for arrays of detectors with fully integrated readout and programmable active quench mechanisms where low power consumption and high fill factor is of primary concern.  III. OPERATION The quench circuit proposed in this paper is based on a CMOS thyristor delay cell approach[3], the basic building block of which is shown in Fig. 1.             Figure 1: CMOS Thyristor Delay Cell  Referring to Fig. 2, the power supplies are Vop at the magnitude of the reverse breakdown voltage of the SPAD structure, and Vdd of magnitude of the excess reverse M1 M2 M3 Vdd Vss 258breakdown (Ve) voltage selected to satisfy photon detection probability (PDP) and dark count rate (DCR) specifications. Under quiescent conditions midpoint and Vcathode nodes are high impedance and power consumption is minimized. When the detector fires the positive feedback loop of M1 and M4 promotes the discharge and clamps the SPAD cathode to 0V. A delay time later the latched condition is reset via the dominant drive strength PMOS M3 and disabled through NMOS M2. Capacitive elements are MOS gates thus providing a purely CMOS transistor solution. Simulation results are shown in Fig. 3.                  Figure 2: Dynamic Quench Circuit A   Figure 3: Simulation Results for Circuit A: two consecutive detector firings.  Alternatively, Fig. 4 shows a development of Fig. 2, still using the feedforward principle but employing an unbalanced threshold inverter delay chain which provides a well defined quench pulse duration but a fast subsequent reset. Using such a scheme also provides opportunity for integrating enable/disable and global pulse duration adjustment functions via the introduction of appropriate logic and current starved inverters respectively.                  Figure 4: Dynamic Quench Circuit B  Simulation results for circuit B are given in Fig. 5. The circuit operation has been verified over all process corners from -30 to +70oC.   Figure 5: Simulation Results for Circuit B: two detector firings with different quench times  IV. EFFECTS OF LEAKAGE We omit a quench resistor altogether relying on the dominant subthreshold leakage of PMOS M3 over NMOS M4 to maintain the SPAD at a high potential between avalanche events (~8:1 width). Similarly, the M2/M1 sizing relationship (2:1 width) contributes to correct quiescent potential on node midpoint so avoiding erroneous leakage induced triggering.  The charge injection on the Vcathode and midpoint nodes via control signals pdrive/ndrive respectively is also in the correct sense to provide gate overdrive on the M4 pull-down and M1 pull-up devices to minimize sub-threshold leakage in those devices and thus promoting the correct dominant current path. This must be maintained over process corners and temperature. Should the conditions be violated DCR will increase at  ~20Hz/pA of unbalance, for our detectors. Vop Vdd Vss M1 M2 M3 M4 Vcathode stage2 stage1 midpoint SPAD Vop Vdd Vss M1 M2 M3 M4 Vcathode pdrive midpoint ndrive enable out slow rise slow rise slow fall 259Note there is a device sizing trade off between the thyristor feedforward loop delay and the creation of the correct leakage relationships. A tabulated performance summary is shown in Table 1.   Table 1: Circuit B Performance Summary  V. CIRCUIT IMPLEMENTATION A current starved inverter chain is used for the purposes of tuning the quench delay time. The basic slow rise-fast fall cell used in the delay generator is shown in Fig. 6.                 Figure 6: Slow Rise-Fast Fall Current Starved Inverter Cell  The control signal delay_ctrl is used to vary the duration that the SPAD stays in its avalanched state, and hence can be used to set the resolution of event counting in time uncorrelated photon counting mode. It is also known that the quench duration and SPAD afterpulsing are related [3] and so this may be traded off against PDP.  Power Consumption  Disregarding the SPAD recharge consumption, circuit B standalone consumes an average of 60µW from a 3.3V supply at a detector firing rate of 25MHz. This is comparable to passively quenched systems with the advantage of reduced local heating effects plus in built gating and logic output levels.    Layout  The area of circuit B is approximately 130µm2, and is designed such that large arrays of detectors/quenchers may be formed by abutment, allowing distribution of power supplies and ‘global’ control signals.    Figure 7: Layout of Circuit B plus Detector   VI. CONCLUSIONS We have reported two novel SPAD active quenching circuit solutions exhibiting advantages over conventional passive/hybrid element approaches, enabling VLSI with detector arrays and on-chip processing for improved performance single photon counting systems.  REFERENCES [1] Niclass, Rochas, Besse, Charbon: ‘Design and Characterisation of a CMOS 3-D Image Sensor Based on Single Photon Avalanche Diodes’. IEEE JSSC, Vol 40, No. 9, Sept 2005.  [2] G.Kim, M.Kim, Chang, W.Kim: 'A Low Voltage Low Power CMOS Delay Element'. IEEE Journal of Solid State Circuits, Vol 31, No7, July 1996. [3] Zappa, Ghioni, Cova, Samori, Giudice: 'An Integrated Active-Quenching Circuit for Single Photon Avalanche Diodes'. IEEE Transactions on Instrumentation and Measurement, Vol 49, No. 6, Dec 2000. [4] Zappa, Giudice, Ghioni, Cova: 'Fully Integrated Active Quenching Circuit for Single Photon Detection'. ESSCIRC 2002. [5] Tisa, Zappa, Labanca: ‘On-chip Detection and Counting of Single Photons’. IEEE Electron Devices Meeting, 2005. Layers’. ISSCC 2006 Session 16, 16.9. [6] Aull et al: ‘Laser Radar Imager Based on 3D Integration of Geiger Mode Avalanche Photodiodes with Two SOI Timing Circuit [7] Rochas, Pauchard, Monat, Matteo, Trinkler, Thew, Ribordy: 'Ultra Compact CMOS Single Photon Detector'. Proceedings of SPIE, Vol 6372 2006. [8] Mosconi, Stoppa, Pancheri, Gonzo, Simoni: ‘CMOS Single-Photon Avalanche Diode Array for Time Resolved Fluorescence Detection’. SSCC 2006, ESSCIRC 2006. Technology 0.35µm 4ML CMOS Transistor Count 20T Area 130µm2 Supply Voltage 1.7 - 3.6V Power Consumption 60µW average @ 25MHz firing rate. Quench duration 2 – 30ns Arming (enable) Time 300ps  Feed fwd trigger time 100 - 500ps delay_ctrl Vdd Vss M1 M3 M2 in long out 260

al: ‘Laser Radar Imager Based on 3D Integration of Geiger Mode Avalanche Photodiodes with Two SOI Timing Circuit

Chang, W.Kim: 'A Low Voltage Low Power CMOS Delay Element'.

Charbon: ‘Design and Characterisation of a CMOS 3-D Image Sensor Based on Single Photon Avalanche Diodes’.

Cova: 'Fully Integrated Active Quenching Circuit for Single Photon Detection'.

Giudice: 'An Integrated ActiveQuenching Circuit for Single Photon Avalanche Diodes'.

Labanca: ‘On-chip Detection and Counting of Single Photons’.

Simoni: ‘CMOS SinglePhoton Avalanche Diode Array for Time Resolved Fluorescence Detection’.

Trinkler, Thew, Ribordy: 'Ultra Compact CMOS Single Photon Detector'.

Dynamic Quenching for Single Photon Avalanche Diode Arrays

Dynamic Quenching for Single Photon Avalanche Diode Arrays

Abstract

Similar works

Full text

Available Versions

Edinburgh Research Explorer