Development of styrene based imprinted sorbents for selective clean-up of metalloporphyrins in organic media

Abstract

Most crude oils contain traces of vanadium and nickel complex with porphyrins (VTPP and NTPP) within their asphaltene fraction. Although these metals are only present in trace quantities, they have a significant and detrimental impact on the refining process by degrading the quality of intermediate and end products. Therefore, their selective removal is highly desirable. This thesis presents the development of nickel porphyrin, nickel vanadyl porphyrin imprinted nanofibers and vanadyl porphyrin imprinted polymer (MIP) particles for application as selective sorbents. Computational model based on the combination of molecular dynamics simulations and quantum mechanics was successfully applied to the styrene functional monomer selection. The particle was prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The morphologies, thermal stabilities and porosities of the imprinted sorbents were studied using SEM, TGA, and BET nitrogen gas adsorption. Chloroform was found to swell the polymer particles to a higher degree than methanol and acetonitrile. The adsorption characteristics of the imprinted sorbents best fitted with Freundlich isotherm model. The imprinted sorbents recorded high extraction efficiencies (EEs) of > 99 % in selectively extracting the metalloporphyrins. The impact of the template on the affinity of recognition for NTPP was evaluated. The results showed that the NTPP adsorption capacity increased as the molar ratio of NTPP to styrene was increased from 1:1 to 3:1. The optimal ratio of template to functional monomer which yielded the best specific affinity and highest recovery (99.9 %) was 3:1. The effects of trifluoroacetic acid (TFA), dichloromethane (DCM), dimethyl sulphoxide (DMSO), pentane (PEN) on electro-spinnability of the polymer solutions and the morphological appearance of the nanofibers were investigated. The imprinted nanofibers exhibited the same selectivity specialism for both NTPP and VTPP. A remarkable stability in relation to reusability was observed when imprinted nanofibers were used, as they could be reused nine times without incurring any significant loss in removal efficiency. The results were validated by analysing a certified reference material. The imprinted sorbents were therefore found to be selective sorbents that are well suited for handling trace metals in organic media