Angulo, I.

Cordovilla, F.

Fitzpatrick, M. E.

García-Beltrán, A.

Langer, K.

Ocaña, J. L.

Smyth, N. S.

English

Crossref

Laser shock processing (LSP) is a mechanical surface treatment to induce a compressive residual stress state into the near surface region of a metallic component. The effect of the cyclic deformation properties of ductile materials on the final residual stress fields obtained by LSP is analysed. Conventional modelling approaches either use simple tensile yield criteria, or isotropic hardening models if cyclic straining response is considered for the material during the peen processing. In LSP, the material is likely to be subject to cyclic loading because of reverse yielding after the initial plastic deformation. The combination of experiment and modelling shows that the incorporation of experimentally-determined cyclic stress-strain data, including mechanical hysteresis, into material deformation models is required to correctly reflect the cyclic deformation processes during LSP treatment and obtain accurate predictions of the induced residual stresses.</p

Coventry University Pure Portal

The effect of material cyclic deformation properties on residual stress generation by laser shock processing

https://pure.coventry.ac.uk/ws/files/23390510/Binder4.pdf

The effect of material cyclic deformation properties on residual stress generation by laser shock processing

Abstract

Similar works

Full text

Available Versions

Crossref

Coventry University Pure Portal