Bis, Jaroslaw

Deja, Marek A.

Duraj, Piotr

Gocol, Radoslaw

Hudziak, Damian

Jasiński, Marek

Mizia, Magdalena

Rankin, J. Scott

Żak, Aleksandra

English

The Research Repository @ WVU (West Virginia University)

Faculty Scholarship 2019 Surgical Correction of Aortic Regurgitation Using a HAART 300™ Rigid Aortic Ring: A Novel Method to Standardize Aortic Valve Repair Radoslaw Gocol Upper Silesian Heart Center Marek Jasiński Wroclaw Medical University Damian Hudziak Upper Silesian Heart Center, Katowice, Poland Jaroslaw Bis Upper Silesian Heart Center, Medical University of Silesia, School of Medicine Aleksandra Żak Upper Silesian Heart Center See next page for additional authors Follow this and additional works at: https://researchrepository.wvu.edu/faculty_publications  Part of the Cardiology Commons Digital Commons Citation Gocol, Radoslaw; Jasiński, Marek; Hudziak, Damian; Bis, Jaroslaw; Żak, Aleksandra; Duraj, Piotr; Mizia, Magdalena; Rankin, J. Scott; and Deja, Marek A., "Surgical Correction of Aortic Regurgitation Using a HAART 300™ Rigid Aortic Ring: A Novel Method to Standardize Aortic Valve Repair" (2019). Faculty Scholarship. 1475. https://researchrepository.wvu.edu/faculty_publications/1475 This Article is brought to you for free and open access by The Research Repository @ WVU. It has been accepted for inclusion in Faculty Scholarship by an authorized administrator of The Research Repository @ WVU. For more information, please contact ian.harmon@mail.wvu.edu. Authors Radoslaw Gocol, Marek Jasiński, Damian Hudziak, Jaroslaw Bis, Aleksandra Żak, Piotr Duraj, Magdalena Mizia, J. Scott Rankin, and Marek A. Deja This article is available at The Research Repository @ WVU: https://researchrepository.wvu.edu/faculty_publications/1475 Address for correspondence: Radosław Gocoł, MD, Department of Cardiac Surgery, Upper Silesian Heart Center,  ul. Ziołowa 45/47, 40–635 Katowice, Poland, tel: +48 60540155, e-mail: gocot@poczta.onet.plReceived: 23.05.2019 Accepted: 4.11.2019Surgical correction of aortic regurgitation using  a HAART 300™ rigid aortic ring: A novel method  to standardize aortic valve repairRadosław Gocoł1, Marek Jasiński2, Damian Hudziak1, Jarosław Bis1, 3, Aleksandra Żak1, Piotr Duraj1, Magdalena Mizia4, J. Scott Rankin5, Marek A. Deja1, 31Department of Crdiac Surgery, Upper Silesian Heart Center, Katowice, Poland 2University Clinical Hospital Department of Cardiac Surgery, Wroclaw Medical University, Wroclaw, Poland 3Department of Cardiac Surgery, Medical University of Silesia, School of Medicine, Katowice, Poland  41st Division of Cardiology, Upper-Silesian Heart Center, Katowice, Poland 5WVU Heart and Vascular Center, West Virginia University, United StatesDue to the lack of reproducible surgical repair techniques which yield good long-term results, tri-cuspid aortic valve regurgitation, until recently, has been managed primarily with replacement of the valve with mechanical or biological prostheses [1]. Therefore, cardiac surgeons have been searching for repair techniques which enable the preservation of native valve for many years [2, 3]. Long-term research showed that a key factor facilitating per-manent repair of the aortic valve, similar to mitral or tricuspid valves, was stabilization of the annulus. Stabilization prevents the recurrence of aortic regurgitation due to subsequent dilatation of the aortic root [4, 5]. The recently designed HAART 300™ (BioStable Science and Engineering, Austin, TX) rigid ring implanted under aortic valve cusps (Fig. 1A, B) could be a significant achievement in the area of aortic valve stabilization. The first four cases of HAART 300™ aortic ring implantation in Poland have recently been published [6].In the present study, early results of tricuspid aortic valve repair with the use of HAART 300™ aortic ring were reviewed  in a cohort  of 15 patients.Patients with moderate and severe aortic valve regurgitation were referred for aortic valve repair with the use of HAART 300™ aortic ring, accord-ing to European Society of Cardiology/European Association for Cardio-Thoracic Surgery guidelines on valvular heart disease, published in 2012 and 2017 [7, 8].The following criteria precluded HAART 300™ aortic ring implantation: bicuspid aortic valve, infective endocarditis and significant cusp fenestrations or calcifications.Patients with coexisting diseases requiring complex surgical procedures or reparable leaflet defects were not excluded.Prior to surgery transthoracic echocardiog-raphy (TTE) was performed. The left ventricular end diastolic volume, left ventricular end systolic volume and left ventricular ejection fraction were calculated. The dimensions of left ventricular outflow tract, aortic root and ascending aorta were measured. The mitral and tricuspid valves were assessed. Computed tomography angiography of thoracic aorta was performed in patients with aortic dilatation to extend diagnostics and plan the scope of the operation.When referring patients for repair surgery, El-Khoury classification [2] was used to define the type of aortic regurgitation.With the use of intra-operative transesopha-geal echocardiography (TEE), long and short axis views were acquired for measurements and assess-ment of the aortic valve. Measurements included: aortic annulus (aorto-ventricular junction), aortic root, sinotubular junction, and the diameter of ascending aorta.Aortic regurgitation grade was established ac-cording to a four-point scale: 0 — none or trivial, 799www.cardiologyjournal.orgINTERVENTIONAL CARDIOLOGYCardiology Journal 2019, Vol. 26, No. 6, 799–801DOI: 10.5603/CJ.2019.0118 Copyright © 2019 Via MedicaISSN 1897–5593BRIEF COMMUNICATIONI — mild, II — moderate, III — moderately severe, IV — severe [9]. For correction and stabilization of the aortic valve, a HAART 300™ (BioStable Science and Engineering, Austin, TX) was used [10]. The ring is made of a titanium stent covered with a dacron material, having an elliptic shape and three 10-de-gree outwardly flaring posts. The ring is available in four different sizes: 19, 21, 23, and 25 mm. The result of aortic valve repair was assessed intra-operatively by measuring the effective coaptation height with Schaffers callipers, aiming at a mini-mum of 9 mm. The quality of repair was also as-sessed by echocardiography, which was performed intra-operatively (TEE), on the 7th postoperative day (TTE), and subsequently at 6 month intervals. Effective valve repair was defined as no, trivial or mild central regurgitation.Fifteen patients aged between 53 and 73 (mean 65.6 ± 5.8) years, including 13 (86.6%) males underwent aortic valve repair with the use of HAART 300™ aortic ring during a period from September 2016 to January 2019. Eleven (73.3%) patients required cusp plication, 9 (60%) patients — replacement of the aorta (including 4 [26.6%] with co-existing aortic root aneurysm in whom Figure 1. A. Rigid ring HAART 300™ (BioStable Science and Engineering, Austin, TX); B. The ring HAART 300™ underneath the cusp attachment; C. Echocardiographic data; IA — aortic regurgitation; LVOT — left ventricular outflow tract; LV EDV — left ventricular end diastolic volume; ESV — left ventricular end systolic volume; TEE — transesophageal echocardiography; TTE — transthoracic echocardiography.Parameter Pre-operative TTE Intra-operative TEE 7 days TTE Follow up TTEIA grade [number of patients]:0 0 9 8 8I 0 6 6 5II 0 0 1 1III 5 0 0 0IV 10 0 0 1LVOT [mm] 23 ± 3 23 ± 3 22.6 ± 2.5 23.3 ± 3.1Annulus [mm] 25.5 ± 2.2 23 ± 2 23 ± 2 23 ± 2Aortic root [mm] 0046 ± 8.5 36.4 ± 4.4 0037 ± 4.4 039.1 ± 5.09Ascending aorta [mm] 0046 ± 10 32.4 ± 3.9 33.2 ± 3.9 34.9 ± 4.2Ejection fraction [%] 48.3 ± 9 47.3 ± 9.6 047.4 ± 12.4 49.3 ± 7.6LV EDV [mL] 0167 ± 10 – – 162.1 ± 120LV ESV [mL] 085.6 ± 8.5 – – 96.8 ± 10A BC800 www.cardiologyjournal.orgCardiology Journal 2019, Vol. 26, No. 6aortic root remodeling was performed), 2 (13.3%) patients required mitral valve repair, 4 (26.6%) patients recieved simultaneous coronary artery bypass grafts.Intra-operative TEE assessment revealed a perfectly competent aortic valve after repair in 9 (60%) patients, mild central regurgitation in 5 (33.3%) patients, and mild non-central regurgita-tion in 1 (6.7%) patient (Fig. 1C). In 1 case moderate central aortic regurgitation was revealed in TEE which was related to excessive leaflet plication. During the additional period of aortic cross clamping, the single plication stitch was removed from every cusp resulting in trivial aortic regurgitation.One patient required reoperation for bleeding. No neurological or thromboembolic complications were noted. On day 7 after surgery, 1 patient required laparotomy due to gastric ulcer perforation. Mean Intensive Care Unit stay was 3.2 ± 1.5 days. The patients were discharged on day 8.1 ± 3.2 post-op.The TTE performed on day 7 after surgery revealed no aortic regurgitation in 8 (53%) patients, 6 (40%) patients presented with mild, central aortic regurgitation, and 1 (6.7%) patient progressed from mild to moderate non-central regurgitation (Fig. 1C).Complete follow-up was available in all pa-tients, ranging from 2 months to 30 months after surgery (mean 257 ± 194 days). No deaths were noted during the follow-up period. Competent aortic valve was revealed in 8 (53%) patients and 5 (33%) patients presented with mild, central aortic regurgitation. In 1 (6.7%) patient moderate aortic regurgitation was noted on echocardiography performed 18 months after surgery (Fig. 1C). This was associated with the increase of aortic root diameter from 42 mm on discharge to 52 mm and apparent non-coronary cusp restriction. Finally, in 1 patient moderate aortic regurgitation on dis-charge progressed to severe within half a year and this patient underwent a redo aortic valve replace-ment with bioprosthesis.Implantation of the HAART 300™ ring is a simple and reproducible aortic annuloplasty and annular stabilization technique. This method mark-edly simplifies the aortic valve repair procedure, and in the early experience of the documented operators, is associated with good short-term results. It provides durable protection for patients preventing recurrent aortic valve regurgitation. It does not preclude simultaneous employment of repair techniques on aortic valve cusps nor the aortic valve sparing procedure in case of co-existing root aneurysm. Moreover, this technique does not increase intra-operative mortality, nor the rate of cardiovascular complications. It seems that the presented method of repair can be used in patients with tricuspid aortic valve regurgitation caused by one or more of the following conditions: aortic annulus dilatation, leaflet prolapse, root and/or ascending aorta aneurysm. Funding: The study was funded from statutory funds of Medical University of Silesia: KNW-1-182/ /N/6/K and KNW–1-014/N/8/K.Conflict of interest: J. Scott Rankin is the crea-tor of the HAART 300™ ring and a consultant in the company BioStable Science and Engineering, Austin, TX.References1. Stephenson LW. History of Cardiac Surgery. In: Cohn LH, Ed-munds LH Jr. (Hrsg.): Cardiac Surgery in the Adult. McGraw-Hill, New York (USA). 2003: 3–29.2. El Khoury G, Glineur D, Rubay J, et al. Functional classification of aortic root/valve abnormalities and their correlation with eti-ologies and surgical procedures. Curr Opin Cardiol. 2005; 20(2): 115–121, doi: 10.1097/01.hco.0000153951.31887.a6, indexed in Pubmed: 15711197.3. Lansac E, Di Centa I, Raoux F, et al. A lesional classification to standardize surgical management of aortic insufficiency towards valve repair. Eur J Cardiothorac Surg. 2008; 33(5): 872–878, doi: 10.1016/j.ejcts.2007.12.033, indexed in Pubmed: 18258445.4. Schäfers HJ. Aortic annuloplasty: a new aspect of aortic valve repair. Eur J Cardiothorac Surg. 2012; 41(5): 1124–1125, doi: 10.1093/ejcts/ezr284, indexed in Pubmed: 22290919.5. Jasinski MJ, Gocol R, Malinowski M, et al. Predictors of early and medium-term outcome of 200 consecutive aortic valve and root repairs. J Thorac Cardiovasc Surg. 2015; 149(1): 123–129, doi: 10.1016/j.jtcvs.2014.08.057, indexed in Pubmed: 25439785.6. Juściński JH, Koprowski A, Kołaczkowska M, et al. First uses of HAART 300 rings for aortic valve repair in Poland - 4 case studies. Kardiochir Torakochirurgia Pol. 2018; 15(1): 38–43, doi: 10.5114/kitp.2018.74674, indexed in Pubmed: 29681960.7. Vahanian A, Alfieri O, Andreotti F, et al. Guidelines on the man-agement of valvular heart disease (version 2012). Eur Heart J. 2012; 33(19): 2451–2496, doi: 10.1093/eurheartj/ehs109, indexed in Pubmed: 22922415.8. Baumgartner H, Falk V, Bax JJ, et al. 2017 ESC/EACTS Guide-lines for the management of valvular heart disease. Eur Heart J. 2017; 38(36): 2739–2791, doi: 10.1093/eurheartj/ehx391, indexed in Pubmed: 28886619.9. Zoghbi WA, Adams D, Bonow RO, et al. Recommendations for Noninvasive Evaluation of Native Valvular Regurgitation: A Re-port from the American Society of Echocardiography Developed in Collaboration with the Society for Cardiovascular Magnetic Resonance. J Am Soc Echocardiogr. 2017; 30(4): 303–371, doi: 10.1016/j.echo.2017.01.007, indexed in Pubmed: 28314623.10. Rankin JS, Mazzitelli D, Fischlein T, et al. Geometric ring annu-loplasty for aortic valve repair during aortic aneurysm surgery: two-year clinical trial results. Innovations (Phila). 2018; 13(4): 248–253, doi: 10.1097/IMI.0000000000000539, indexed in Pub-med: 30138245.www.cardiologyjournal.org 801Radosław Gocoł et al., Aortic valve repair with HAART 300™ rigid ring

Surgical Correction of Aortic Regurgitation Using a HAART 300™ Rigid Aortic Ring: A Novel Method to Standardize Aortic Valve Repair

https://researchrepository.wvu.edu/cgi/viewcontent.cgi?article=2500&amp;context=faculty_publications

Surgical Correction of Aortic Regurgitation Using a HAART 300™ Rigid Aortic Ring: A Novel Method to Standardize Aortic Valve Repair

Abstract

Similar works

Full text

Available Versions

The Research Repository @ WVU (West Virginia University)