Deng, Wen

Shi, Donglu

Wang, Julian

English

Missouri University of Science and Technology (Missouri S&T): Scholars' Mine

Missouri University of Science and Technology Scholars' Mine Civil, Architectural and Environmental Engineering Faculty Research & Creative Works Civil, Architectural and Environmental Engineering 01 Jan 2019 Smart Building and Construction Materials Donglu Shi Julian Wang Wen Deng Missouri University of Science and Technology, wendeng@mst.edu Follow this and additional works at: https://scholarsmine.mst.edu/civarc_enveng_facwork  Part of the Civil Engineering Commons Recommended Citation D. Shi et al., "Smart Building and Construction Materials," Advances in Materials Science and Engineering, vol. 2019, Hindawi Limited, Jan 2019. The definitive version is available at https://doi.org/10.1155/2019/2432915 This work is licensed under a Creative Commons Attribution 4.0 License. This Editorial is brought to you for free and open access by Scholars' Mine. It has been accepted for inclusion in Civil, Architectural and Environmental Engineering Faculty Research & Creative Works by an authorized administrator of Scholars' Mine. This work is protected by U. S. Copyright Law. Unauthorized use including reproduction for redistribution requires the permission of the copyright holder. For more information, please contact scholarsmine@mst.edu. EditorialSmart Building and Construction MaterialsDonglu Shi ,1 Julian Wang ,2,3 and Wen Deng 41e Materials Science and Engineering Program, Department of Mechanical and Materials Engineering,College of Engineering and Applied Science, University of Cincinnati, Cincinnati 45221-0072, USA2Department of Civil and Architectural Engineering and Construction Management, University of Cincinnati, Cincinnati,OH 45221, USA3School of Architecture and Interior Design, University of Cincinnati, Cincinnati, OH 45221, USA4Department of Civil, Architectural and Environmental Engineering, Missouri University of Science and Technology, Rolla,MO 65409, USACorrespondence should be addressed to Donglu Shi; shid@ucmail.uc.eduReceived 5 September 2018; Accepted 5 December 2018; Published 6 January 2019Copyright © 2019 Donglu Shi et al. #is is an open access article distributed under the Creative Commons Attribution License,which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Advances and innovations in materials science and engi-neering have always played a substantial role in civil engi-neering, building structural design, and construction. In recentyears, extensive effort has been devoted to the applications ofstimuli-responsive smart materials and nanostructures inbuildings. #ese smart materials used in the built environmentcan be defined as those offering specific functional andadaptable properties in response to thermal, optical, structural,and environmental stimuli. Not only do these materials en-hance the overall performance of new building constructionbut also promise safer structures, longer durability of buildingelements, efficient building energy savings, greater environ-mental sustainability, and even higher indoor user comfort.Given the increasing imperatives for the above, we have or-ganized this themed special issue that focuses on smartbuildings and construction materials. #e main aim of thisspecial issue is to encapsulate the current interest and state ofresearch related to the smart materials in building and con-struction applications, underpinning current and futurechallenges in building energy, environmental sustainability,and structural safety and durability.In this special issue, after rigorous peer-review processes,the original research papers and review papers acceptedcover a wide range of topics that address the critical issues inthe development and implementation of smart materials forbuilding design and construction. A total of ten papers inthis special issue are listed as follows.In the article titled, “Applications of Shape MemoryPolymers in Kinetic Buildings,” J. Li et al. investigated thestructures and systems and focused on the mechanisms andbehaviors of two-way shape memory effects. Special em-phasis was on the potential use of the reversible shape-changing abilities of dynamic envelope structures forbuilding energy efficiency.S. Hao et al. proposed a heat recovery wall systemcomposed of high thermal mass materials and air cavitieswhich can efficiently recover gas heat from heating stovesand reduce users’ exposure to indoor air pollution. #eyconducted on-site experimental tests to investigate thesurface temperature distribution and thermal performanceof this specific wall system design.J. Li et al. examined modular prefabricated buildings withsteel structural systems and integrated building envelopesusing computational simulations and experimental tests.#eirresults highlighted the environmental performance of eachconstruction detail and possibilities of optimizing the design ofintegrated envelopes for environmental sustainability.S. Antony et al. carried out numerical analysis to studythe correlation of delamination onset and investigated themethods to enhance delamination strength of unidirectionalpultruded smart composite platforms.C. Kang et al. evaluated the self-healing performance ofconcrete containing fly ash and fiber for improving healingperformance, by comparing the flexural load and the flexuralstiffness before and after crack, using the notched specimen.S. P. Dunuweera and R. M. G. Rajapakse reviewed themanufacturing processes, mechanical properties, typicaluses, and associated environmental emissions of differentHindawiAdvances in Materials Science and EngineeringVolume 2019, Article ID 2432915, 2 pageshttps://doi.org/10.1155/2019/2432915types of cement products used in civil and buildingenvironment.R. Zhong et al. developed an optical-fiber-based thermalintegrity profiling (TIP) method to provide a comprehensiveand accurate evaluation of the defects inside of concrete.#eproposed method was compared to the current thermalinfrared probe or embedded thermal sensor-based TIP andshowed better determination of deflect location and size.N. Shaheen et al. presented data on use of limestonepowder as a carrier medium to immobilize Bacillus subtilisand its contribution to self-healing efficiency of cementitiousmaterials in terms of recovery of compressive strength.I. -H. Yang et al. performed experimental tests to studythe flexural responses of high-strength fiber-reinforcedconcrete beams and high-strength concrete beams. Crackand failure patterns, load capacity, deflection, crack stiffness,ductility, and flexural toughness were compared andinvestigated.Y. J. O. Moraes et al. presented results on a passivevibration control system with superelastic shape memoryalloy coil springs configuration and evaluated the perfor-mance of the proposed system through analytical, numer-ical, and experimental methods.#is special issue not only is providing the most up-to-date information on focused areas of smart building ma-terials, utilizing advanced materials science, but alsointended to serve as an informative tutorial for nontechnicalspecialists from fields of architectural engineering, civilengineering, materials science, chemistry, computer simu-lation, and environmental engineering. It will shed new lighton the various new strategies adopted for building design,structural engineering, and construction. Both un-dergraduate and graduate students will find this special issuea valuable reference for their special research projects andthesis works. We hope these articles will provide timely anduseful information for the progress of advanced materialsapplications in smart buildings.Conflicts of InterestWe, the Guest Editorial team of this special issue, declarethat there are no conflicts of interest or private agreementswith companies regarding our work for this special issue.Wehave no financial relationships through employment, con-sultancies, and either stock ownership or honoraria, with theindustry.AcknowledgmentsWe are grateful to all authors for their excellent contribu-tions to this special issue.Donglu ShiJulian WangWen Deng2 Advances in Materials Science and EngineeringCorrosionInternational Journal ofHindawiwww.hindawi.com Volume 2018Advances inMaterials Science and EngineeringHindawiwww.hindawi.com Volume 2018Hindawiwww.hindawi.com Volume 2018Journal ofChemistryAnalytical ChemistryInternational Journal ofHindawiwww.hindawi.com Volume 2018ScienticaHindawiwww.hindawi.com Volume 2018Polymer ScienceInternational Journal ofHindawiwww.hindawi.com Volume 2018Hindawiwww.hindawi.com Volume 2018Advances in  Condensed Matter PhysicsHindawiwww.hindawi.com Volume 2018International Journal ofBiomaterialsHindawiwww.hindawi.com Journal ofEngineeringVolume 2018Applied ChemistryJournal ofHindawiwww.hindawi.com Volume 2018NanotechnologyHindawiwww.hindawi.com Volume 2018Journal ofHindawiwww.hindawi.com Volume 2018High Energy PhysicsAdvances inHindawi Publishing Corporation http://www.hindawi.com Volume 2013www.hindawi.comThe Scientific World Journal8TribologyAdvances inHindawiwww.hindawi.com Volume 2018Hindawiwww.hindawi.com Volume 2018ChemistryAdvances inHindawiwww.hindawi.com Volume 2018Advances inPhysical ChemistryHindawiwww.hindawi.com Volume 2018BioMed Research InternationalMaterialsJournal ofHindawiwww.hindawi.com Volume 2018NanomaterialsHindawiwww.hindawi.com Volume 2018Journal ofNanomaterialsSubmit your manuscripts atwww.hindawi.com

Smart Building and Construction Materials

https://scholarsmine.mst.edu/cgi/viewcontent.cgi?article=2805&context=civarc_enveng_facwork

Smart Building and Construction Materials

Abstract

Similar works

Full text

Available Versions

Missouri University of Science and Technology (Missouri S&T): Scholars' Mine