Roof failure in coal mines is strongly related to the frequency of laminations and their movement when
the load acts upon them. Detachment of roof bolts from mine roof due to improper estimation of extent
of weak zone is one of the major problems in underground coal mines, thus affecting the safety and productivity of workings. The most popular and practiced method for roof support design in Indian coal mines is the Central Mining Research Institute-ISM geomechanical classification system. Irrespective of such an established system of support design, accidents due to roof fall still persist. Here we review various available classification systems for rock load estimation and identify their limitations. The study has been extended taking into consideration the case study of KTK-6 incline of Singareni Collieries Company Limited by proposing a modified rock mass classification system based on seismic wave velocity as a key descriptor. A
modified rock mass rating (RMR) system (RMRdyn) with inclusion of seismic velocity as one of the parameters is proposed for the estimation of rock load. Enhancement in rock load by 20% has been found for
RMRCMRI-ISM values less than 40 according to the new rock load relation. This resulted in under-supporting
of the roof and thus might have caused failures. For cases with RMRCMRI-ISM values more than 60, the earlier
equation overestimates rock load by about 25% resulting in over-supporting. Thus, estimation of rock load from the proposed new equation appears to be more rational as it takes into account the actual damage
zone