Boccuzzi, Flora

Manzoli, Maela

Massaccesi, F.

Menegazzo, F.

Pinna, F.

Signoretto, M.

Trevisan, V.

English

Institutional Research Information System University of Turin

Au/ZrO2 catalysts for LT-WGSR: active role of sulfates during the gold deposition  Michela Signoretto1*, Fabio Massaccesi1, Valentina Trevisan1, Federica Menegazzo1, Francesco Pinna1, Maela Manzoli2, Flora Boccuzzi2  1Department of Chemistry, University of Venice and “Consorzio INSTM”, Venice (Italy) 2Department of Chemistry IFM and NIS Centre of Excellence, University of Torino (Italy) * corresponding author e-mail: miky@unive.it (M. Signoretto)  Introduction   The development of a new generation of catalysts with high activity towards the conversion of CO at low temperatures, easy to activate and with good stability to air and liquid water, is highly desirable, since commercially available LT-WGS samples do not meet these requirements [1]. Gold nanoparticles supported over metal oxides as catalytic systems for the LT-WGSR have been the subject of numerous studies and rrecently also Au/ZrO2 samples have been successfully investigated [2]. The goal of the present work is to examine the effects of the addition of various amounts of sulfates to a zirconia support and their possible role during the Au deposition-precipitation step. In fact, while it is known that sulfates addition alters chemical and surface features of the zirconia support, it  would be very interesting to prove an active role of SO4= in the delicate phase of gold deposition on the support, and subsequently on Au dispersion and catalytic activity. Other aspects, such as the stability of the new samples, the effects of gold content and of calcination treatment will be discussed too.  Experimental  Zr(OH)4 was sulfated by incipient wetness impregnation with 1, 2, 4, 8 wt % amount of sulfates respectively, and then various gold amounts (1 or 3 wt% ) were added by deposition-precipitation (dp) on the calcined supports [2]. Some catalysts were synthesized after sulphates  removal from the zirconia. Fresh and used samples were characterized by N2 adsorption analysis, sulfates and gold content analysis, thermogravimetric analysis, TPR and TPO, XRD, HRTEM, FTIR spectroscopy and pulse-flow CO chemisorption [3]. WGSR has been studied, after a proper pretreatment, in the 423-453 K range, with a feed mixture containing 1.9 %vol. CO, 39.7 % vol. H2, 9.5 % vol. CO2, 11.4 % vol. N2, 37.5 % vol. H2O (space velocity 9400 h-1).  Results and discussion  N2 adsorption analyses revealed the positive role of sulfates, that alter the structural properties of the support enhancing its specific surface area and thus favouring a better dispersion of gold particles on the support and accordingly a better catalytic activity. However, the final catalysts do not contain sulfates anymore, due to the methodology of gold deposition-precipitation that is carried out at a basic pH [2]. So, SO4= do not behave as promoters of the gold active phase in the final samples. The synthesis of new gold catalysts after sulfates removal from the support has evidenced that sulfates have an active role during the step of Au dp as well. In fact samples over sulfated zirconia present much higher dispersion and catalytic activity than samples with the identical surface area and gold amount over sulfates-free support. So sulfates addition to zirconia means a  twofold advantage: i) higher gold dispersion due to higher surface area; ii) higher gold dispersion due to the positive role of SO4= groups than slowly act addressing the deposition of Au nanoparticles to suitable sites.  CO chemisorption measurements, XRD, FTIR data of adsorbed CO and HRTEM analyses have shown a very high dispersion of gold on all the fresh samples. On the contrary, after some months from the catalyst ‘s synthesis, gold dispersion dramatically decreases if the sample is not properly treated. We have checked various pretreatments, and verified that a thermal process in air at 453K allows to maintain after six months the same gold dispersion and catalytic activity of the fresh sample.  The stability of the new catalytic systems during the LT-WGSR has been investigated too, and these samples perform really very good. For example after 72 hours of time on stream at 453K, the 3wt%Au/ZrO2 catalyst presents a stable conversion of about 90% and gold nanoparticles with a mean particle size of 1.5 nm, which is comparable to that of the as prepared catalyst.  Conclusions The high activity showed by the gold on zirconia catalysts in the water-gas shift reaction was enhanced by the twofold action of sulfates on the support. In fact they lead to a better dispersion of metal on the support both increasing the surface area and acting during the deposition precipitation of gold nanoparticles.  References  [1] Bartholomew, C.H., Farrauto, R.J., “Fundamentals of Industrial Catalytic Processes”, 2nd edition, John Wiley & Sons (2006). [2] F. Menegazzo, F. Pinna, M. Signoretto, V. Trevisan, F. Boccuzzi, A. Chiorino, M. Manzoli, ChemSusChem. 1 (2008) 320. [3] F. Menegazzo, F. Pinna, M. Signoretto, V. Trevisan, F. Boccuzzi, A. Chiorino, M. Manzoli, doi: 10.1016/j.apcata.2008.12.004. 

Au/ZrO2 catalysts for LT-WGSR: active role of sulfates during the gold deposition

https://iris.unito.it/bitstream/2318/110770/1/Au-ZrO2_P10-19.pdf

Au/ZrO2 catalysts for LT-WGSR: active role of sulfates during the gold deposition

Abstract

Similar works

Full text

Available Versions

Institutional Research Information System University of Turin