In the aqueous-based two-phase flow, if the void fraction of dispersed phase exceeds 0.25, conventional electrical impedance tomography (EIT) produces a considerable error due to the linear approximation of the sensitivity back-projection (SBP) method, which limits the EIT's wider application in the process industry. In this paper, an EIT sensing system which is able to handle full void fraction range in two-phase flow is reported. This EIT system employs a voltage source, conducts true mutual impedance measurement and reconstructs an online image with the modified sensitivity back-projection (MSBP) algorithm. The capability of the Maxwell relationship to convey full void fraction is investigated. The limitation of the linear sensitivity back-projection method is analysed. The MSBP algorithm is used to derive relative conductivity change in the evaluation. A series of static and dynamic experiments demonstrating the mean void fraction obtained using this EIT system has a good agreement with reference void fractions over the range from 0 to 1. The combination of the new EIT system and MSBP algorithm would significantly extend the applications of EIT in industrial process measurement
