Bevan, Adam

Stephanie Klecha

English

University of Huddersfield Repository

University of Huddersfield RepositoryBevan, AdamInspecting the Depth of Wheel Tread Surface Damage Using Magnetic Flux LeakageOriginal CitationBevan, Adam (2016) Inspecting the Depth of Wheel Tread Surface Damage Using Magnetic Flux Leakage. In: Wheelsets: Less cost, less risk - the challenge, 15th March 2016, Institute of Mechanical Engineers, London. This version is available at http://eprints.hud.ac.uk/27931/The University Repository is a digital collection of the research output of theUniversity, available on Open Access. Copyright and Moral Rights for the itemson this site are retained by the individual author and/or other copyright owners.Users may access full items free of charge; copies of full text items generallycan be reproduced, displayed or performed and given to third parties in anyformat or medium for personal research or study, educational or not-for-profitpurposes without prior permission or charge, provided:• The authors, title and full bibliographic details is credited in any copy;• A hyperlink and/or URL is included for the original metadata page; and• The content is not changed in any way.For more information, including our policy and submission procedure, pleasecontact the Repository Team at: E.mailbox@hud.ac.uk.http://eprints.hud.ac.uk/Inspecting the Depth of Wheel Tread Surface Damage Using Magnetic Flux LeakageStephanie Klecha – MRX TechnologiesDr Adam Bevan – Institute of Railway ResearchWheelset: Less Cost, Less Risk – The Challenge1. Wheelset Management Challenges2. Development of Surface Crack Measurement Technology 3. Summary of Wheel Handheld Unit4. Example Damage Outputs5. Data Uses and Case StudiesOverviewWHEELSET MANAGEMENT CHALLENGESWheelset Management• Wheelsets are expensive:– Manufacturing – Reprofiling– Inspections– Renewal– Environmental impact– Costs of trains out of service• Strong demand to reduce the rate of wheel damage– Extend wheel reprofiling intervals – Better wheelset life– Lower costs• Inspecting and quantifying surface condition:– Surface damage is difficult to classify visually– Highly subjective and poor repeatability– Not possible to establish depth of defects– Makes data assessment and trending difficult• Wheel lathe best practice:– Reducing the time the vehicle is on the wheel lathe– Preventing excessive material removal to maximise wheelset life– Consistency between wheel lathe operators• Ability to reliably and accurately measure the depth of damage on the wheel tread would significantly assist in the decision making and optimisation of the management of wheel surface damageChallengesSCM TECHNOLOGY DEVELOPMENTSCM Development• MRX’s Surface Crack Measurement (SCM) technology has been in use on rails for 8 years+• 2014: MRX adapted the technology to measure surface cracking on wheels• 2015: MRX awarded funding through the RSSB to validate the hand held product collaboration with Bombardier Transportation and University of HuddersfieldSCM Technology• MRX’s SCM technology currently quantifies defects in the top 7mm of the rail surface and the top 10mm of a wheel surface MRX SCM Inspection Regions10mm7mmSCM Technology Summary• Wheel HHU reports the depth of the deepest artifact in the entire wheel scan• Reported depth is the amount of material to remove from the wheel profile to eliminate the deepest artifact in the scanned segment– 1mm = Lower detection limit (shallowest)– 10mm = Upper detection limit (deepest)– +/-0.5mm = System accuracyTheory of SCM• SCM involves magnetizing the specimen surface• This introduces lines of magnetic flux into the specimenTheory of SCM• In a defect free specimen, these lines travel undisturbed through the specimen• If a defect is present, the flux cannot travel as easily through it• This causes some flux to leak at the position of the defect– SCM uses sensors to measure and record the leaking flux– This data is analysed to quantify the artifactsWheel Sensor Layout• Wheel SCM contains 16 magnetic field sensors spaced at 5mm pitch across the wheel tread• These cover a typical P8 profile as shown:SCM HANDHELD WHEEL UNITWheel SCM HHUSensor HeadMagnetTablet PCWheel SCM HHUData is available to the User immediately at the end of a scanData Output16 SCM sensors produce a damage map of the wheel surface:HHU Data OutputEXAMPLE DAMAGE OUTPUTSDamage Types• Surface breaking and near-surface damage– Rolling contact fatigue (RCF) crackingDamage Types• Surface breaking and near-surface damage– Rolling contact fatigue (RCF) cracking– Thermal cracking and cavitiesNon-visible Damage Max. Measured Depth ~ 7.3mm• HHU reveals damage not visible on uncut wheelDamage Free Wheel• Confirms when wheel is damage freeDATA USES AND CASE STUDIESTypical Data Uses• Routine exams to replace visual inspection– Repeatable, not reliant on experience/judgement– Reveals damage that is not obvious/visible on uncut tread• Used to optimise lathe cut depths– Reduce risk of overcutting,  saves time chasing defects– Minimum cut depth to maintain parity• Understand RCF development and growth rates – Plan maintenance in advance (rather than reactionary)– Highlight problem wheels/vehicles– Optimise periodic turning intervals• Used for specific case studies – Monitoring performance of vehicle changesCase Study 1: Use of HHU during regular inspection (prior to wheel turning) to optimise cut depths at the wheel lathe• Potential benefits:– Cut depths identified prior to reprofiling– Sub-surface damage not-visible during visual inspection identified– Confirm wheelsets requiring largest cuts and minimum cut depth required to maintain parity (prior to reprofiling)– Less time at wheel lathe– Extended wheel life (up to 2 reprofiling activities)Optimise Cut DepthsOptimise Cut Depths• Wheelset life tracked based on observed average wear rates and cut depths (with and without use of HHU). 40 wheels observed during the study• Potential increase in wheel life by 2 additional turning activities (~370kmi) and potential saving in wheelset costs of ~25%7807908008108208308408508608700 200000 400000 600000 800000 1000000 1200000 1400000Reduction in Wheel Diameter (mm)Running Distance (mile)Wheel Lathe CutHHU Crack DepthNew Wheel Dia.Min. Wheel Dia.Scrap Wheel Dia.Extension in wheel lifeCase Study 2: Use of HHU to optimise fleet maintenance and quantify the benefits of potential damage mitigation measures• Potential benefits:– Repeatable measurement of the severity of wheel tread damage– Data trends and performance of mitigation measures (e.g. vehicle changes, alternative wheel steels) can be realised much quicker• Do not have to wait until wheels are turned– Optimise turning interval based on damage depth rather than diameter reduction (or cut depth) at the wheel lathe• Removes variation associated with different wheel lathe operators and different damage types Maintenance DecisionsMaintenance Decisions• Benefits of alternative wheel steel (RS8T) quantified in short timeframe using more repeatable HHU data• Decisions whether to apply to the entire fleet can be made sooner ~ greater savings in costs during franchise Next Steps• Assessment of scrap wheels:– Samples to be examined optically to determine deformation depth, crack length and crack depth– Micro-hardness testing– Correlation HHU readings with measured damage• Further wheel lathe trials to assess damage types and access constraints on different fleets• Pilot study on selected fleets– Business case assessmentAcknowledgments• The results and findings presented were developed as part of the RSSB/Future Railway managed ‘Rail Operator Challenge Competition’ • For further information contact:– a.j.bevan@hud.ac.uk – sek@mrxtech.co.uk

Inspecting the Depth of Wheel Tread Surface Damage Using Magnetic Flux Leakage

Abstract

Similar works

Full text

Available Versions

University of Huddersfield Repository