Industrial   Metal  Finishing,  which  includes electro-deposition of metals and  alloys,  electroless  plating, immersion plating,  chemical  and  electropolishing of metals, anodizing etc. form a major component of surface engineering. Corrosion protection is one main reason for the existence of Industrial Metal finishing Although these processes began for decorative  and  aesthetic  purposes,

their contribution to corrosion prevention and engineering applications, especially in electronics,aerospace, auto-motive and agriculture industries is markedly increasing. The evolution of industrial metal finishing from an art to a science has been a gradual process. The  ABC  of corro-sion protection, principle and mechanism, and the latest developments in terms of 6 Es (Environment-friendly, Econ-omical, Excellent. Energy -saving,  Extremely  fast, and Expertsystem ) have  been  briefly  introduced. Relevant references have been cited for ease  of  access  to  the original and detailed literature

Narang, S K

English

eprints@NML

IINDUSTRIAL METAL FINIS111NG FORCORROSION ('ON'i'ROI,S.K. NARANGScientist, National Metallurgical Laboratory,JAMSHEDPUR - 831 007AIIS'I'RA('TIndustrial Metal Finishing , which includes electrodeposition of metals and alloys, electrolessplating, immersion plating, chemical and electropolishing of metals, anodizing etc. form a majorcomponent of surface engineering. Corrosion protection is one main reason for the existence ofIndustrial Metal finishing Although these processes began for decorative and aesthetic purposes,their contribution to corrosion prevention and engineering applications, especially in electronics,aerospace, automotive and agriculture industries is markedly increasing. The evolution ofindustrial metal finishing from an art to a science has been a gradual process. The ABC ofcorrosion protection, principle and mechanism, and the latest developments in terms of 6 Es(Environment-friendly, Economical, Excellent. Energy -saving, Extremely fast, and Expert-system ) have been briefly introduced. Relevant references have been cited for ease of access tothe original and detailed literature.INTRODUCTION"FINISHING" is defined as the "FINAL" operation applied to the surface of a metal to lend itproperties not possessed by the article in its unfinished form. It may involve any simple buffingand polishing , chemical or electrochemical polishing or colouring, plating of metals for alloys orelectroless plating , anodizing or an organic coating. When done on an industrial scale, it is termedindustrial Metal Finishing. Although these techniques have traditionally been used for thepurpose of decorative or aesthetic appeal, their application for corrosion protection represent themost significant in terms of commercial importance as well as deployment of large number ofpersonnel . Industrial metal finishing encompass a wide range of sciences form chemistry orelectrochemistry, chemical and mechanical engineering, physics to electrical and electronics andeven extend into the realm s of arts. Although the art of industrial metal finishing is very old,even dating back to the bronze age, the techniques applied by finishers in 21st century are goingto more science than art and it is going to acquire the status of Surface Engineering Group.Research in this field is going to be contributing significantly towards progress on the theoreticaland more on the applied aspects.the conventional techniques like plating. electroplating as well as electroless, and anodizing arestill one of the cheapest methods to provide coatings Ibr various applications, in addition totemploying millions of people . These processes have been and are going to be increasinglyimportant in the 21st Century, for all high technology and strategic industries like electronics,telecommunications, photo -optics , computers , aerospace, automobile and other engineeringindustries. Without these, there would be no ICs, or PCI3s, Laser Components, CPUs, Super-conductivity films, thin film products or elctrofonned products, or even traditional common itemsfrom needles to bicycle, cars or aeroplanes. In the coming years, almost every product willrequire surface finishing application. The cost of surface finishing is about 5- 10% of the total costof the article, but the properly finished and coated product has much longer life. At present, theshare of conventional wet processes in industrial metal finishing is about 80% whereas latest dryprocesses account for about 18%. (see Figure 1).Industrial Metal Finishing is estimated to be an $ 30 to 40 billion/year industry, employing lakhsof people world wide. Only one company in USA, dealing with electroplating chemicals claims tohave a business of more than 2000 crore rupees per year. In India, the total business forindustrial finishing is estimated to be around Rs. 1000 crores annually. It is estimated that Indiashares about 5% of the world Metal Finishing market. However, Howard Smith has predictedmigration of large sectors of the finishing industry to less developed nations in response to theincreasingly burdensome cost of compliance with safety and environmental regulations. Hencethere is a considerable scope for India to expand its activities and increase its share of the worldmarket. India has already gained world wide recognition and acceptance from eventechnologically advance nations for its equipment, chemicals and metal finishing chemicals as wellas services. Export of these chemicals and services to neighbouring and African countries arealready a reality and is increasing day by day.There have been many pulls and pushes in the industrial finishing industry. There was a big boomafter the second world war(1945). All traditional surface engineering techniques likeelectroplating , hot dip coatings , anodizing , organic paints, plastics etc . made significant advances.During the late 70s and 80s, the future of electroplating seemed gloomy , but with the increasingdemand in electronics, space, defence and other engineering industries, the commercialapplications of deposition processes increased manifold. It is somewhat mindboggling to note theenormous strides in the field of electroplating as applied to elctronic components . It is estimatedthat plating in electronic and related industries has registered a 16 fold increase just in 5 years. InIndia also, it has been computed that the consumption of plating chemicals for electronics alonehas risen from Rs.0.5 crore in 1989 to Rs. 8 crores in 1994 while it is expected to be more thanRs. 50 crores by 2000 AD'lire industrial metal finishing has met the requirements of a wide variety of industries for brightand corrosion resistant finishes for manufacturing articles which are economical and as well aslong lasting. These finishing techniques have moved from a hit and trial method to a systematicapproach, laying considerable stress on the technical aspects of the process and the product. It isno longer an art , but a complete science and thus the basic knowledge of the principles involved isa must for every engineer and technocrat.2ElectroplatingPhosphatingAnodizing(Wet Processing25%PV GalvanizingCVD, 6%Laser, Plasma Spray.Heat treatment(Dry processing)18%Fig. 1. Share of surface modification techniques inIndustry3PRINCIPLES AND 111EC'IIANISl11The basic principle behind any corrosion or deposition processes , whether electrolytic or withoutcurrent, is the same viz. all these are electrochemical. All the processes take place in anelectrochemical cell or electrolytic cell. Any such cell is composed of three parts- A, B and CwhereA is ANODEB is BREW or ELEC'T'ROLYTEC is CATHODEWhile all the deposition (or reduction) reactions take place at the cathode, the anodic reactions(Oxidation) are basically of three fornis:(1) Metal Dissolution (Corrosion )Zn -+ Zn+2 + 2 e-(ii) Oxygen evolution2 H2O -► 4 H+ +02+ 2 e(pH < 7)4 01+ -► 21120+02 +2 e(pH >7)(iii) Oxidative Reactions4 Al + 302 0 2A12O3 ( as in Anodizing)Fe++ -► Fe*' + eAn anode in a plating bath is a conductor ( metallic, carbon etc.) which is required to complete theelectric circuit from the source of e.m.f. through the electrolyte to the cathode (or workpiece)where the deposition takes place. But in the case of anodizing, the anode is the workpiece whilein corrosion , it is always the anodic part which corrodes. The anode serves to remove theelectrons introduced at the cathode ( negative potential) and is always connected to the positiveterminal of the electrolytic cell.4In non-electrolytic deposition, or even in any corrosion process, the electrochemical cell can berepresented by ORE viz.0 stands for OXIDATIVE REACTIONSR stands for REDUCTIVE REACTIONSE stands for ELECTROLYTECorrosion or deposition cannot take place if any of the three components is absent . Without theapplication of current , there are three techniques for deposition . These are Contact Plating(seldom used now), Immersion Plating ( also called cementation or displacement deposition) andAutocatalytic or Electroless Plating . in immersion plating , the deposition of a metallic coatingon a baser substrate takes place by chemical displacement from a solution of a salt of the noblercoating metal and the driving force is the difference in potentials between the two metals e.g.Fe + Cu++ Cu + Fe++ (i)(-0.44V) ( +0.34 V)Cu + 2Au+ An + Cu" (ii)(+o.34 V) (+1.50V )Cu + Sn++ Sn + Cu++ (iii)(0.34V) (-O..14V)In the last case, the electrode potential of copper is made much more negative by theincorporation of complexing agents like cyanide ions and thiourea in the tinning solution. Inautocatalytic or electrodeless or electroless plating . ( developed by Brenner and Riddell in 1946),deposition of a metal takes place by a controlled chemical reduction that is catalyzed by the metalor alloy being deposited . Although the overall reaction in Electroless Nickel Plating is2H2PO_2 + 2H20 + Ni42 0 Ni + 41e + 2111)03-2The mechanism, as per Lukes isH2P02_ + H2O 0 HPO:-2 + 211' + H- (Anodicor oxidative)2H- + Ni++ Ni + 112 (Cathodic or reductive)If + H+ 112 ( Cathodic)The basic equation for electrodeposition is covered In, Faraday's laws of electrolysis viz. w=zet where w is the weight of metal deposited in gnus when current c in amperes is passed for5time t in seconds while z is a constant called electrochemical equivalent of the substance. TheNernst equation provides the theoretical basis:R'I' aE = Ea + InnF amwhere E is the potential , E. is standard electrode potential , characteristic of the electrode, R isGas Constant , T is absolute temperature in Kelvins. F is the Faraday (96500 ), it is valence changeand a is activity of the metal ions , whereas a? ,, is the activity of the metal itself. The relationshipbetween the free energy and the electrochemical potential or decomposition potential is givenby:G= -nFERECENT DEVELOPMENTS- the 6 EsMajor advances , once again need based , in the 2 1 st Century are going to be in teens of 6 Es:1. Environment -friendly : '['here is no future, even in India, for any process which is notenvironment-friendly. Cyanide baths have already been replaced commercially by non-cyanidebaths e . g. zinc , silver, copper, brass etc. The non-cyanide baths bring about 30-50 % savingsbecause of the heavy expenditure on treatment of the toxic effluent . Chromium plating from Cr"bath may replace the current Cr+6 baths. Cadmium plating may disappear because of toxicity.Even in Gold Plating , acid gold plating is replacing cyanide gold baths . It is worth noting thatM/s ICI, UK are investing 32 million pounds ( 200 crore rupees ) for eco-friendly research. Inshort, Clean Environment and Dry Plating Shops are going to dominate the metal finishingindustry in future.2. Excellence : 71nere is going to be race for TOTAL QUALIT Y and reliability in the comingyears. The demand for the ISO 9000 series will grow and without these , there will be no export.Quality of some of the thin electroplated coatings is comparable to or superior to sputteredcoatings . The quality and the environmental effect must start from the drawing board stage.3. Economical : The key to continued success of any industrial finishing process is Economy,so that it can face growing competition on a global level . The surface engineering processesthemselves are an outcome of the necessity to get properties of gold, nickel and chromium metalson steel at a much cheaper price and getting long corrosion protection . ille concepts of valueengineering and surface engineering are complimentary and are going to be applied in a muchwider proportions than earlier.4. Exceedingly Fast : Conventional methods of plating and painting are very slow e.g. platingrates are of the order of 0.I to 2 microns /minute . The modem production engineeringtechniques, like continuous wire and strip plating, where the rates of plating are 10 to 10,00 timesmore. The application of ultrasonics combined with pulse-plating to improve mass transfer or rateof deposition is likely to come back with a bang. Use of fluoroborate bath, especially for wireplating, will increase in future, for faster rates of deposition(developed by NML).5. Expert System : Automation or the use of expert system for fully computerized finishingprocess controls has become a necessity rather than a luxury to achieve uniformly excellentdeposits at exceedingly high rates . PLCs and control systems with PC base would dominate thescene in future finishing shops.6. Energy-Saving: Since energy is going to be costly and the electroplating and anodizing areenergy intensive, the emphasis will certainly on energy saving processes. Low temperaturecleaning, cold sealing for anodized aluminum, cold phosphating, modified electroless nickelplating at room temperature) all developed at NML) etc., are already replacing high temperatureprocesses. Similarly elect rogalvanizing, tin plating, and aluminum plating are replacing hot dipgalvanizing, tinning and hot dip aluminizing, while immersion and electroless plating of copper,silver, tin, gold are replacing electroplated coatings wherever applicable.It should be emphasized that corrosion is a natural and electrochemical process. A badly plated orpoorly painted job will accelerate corrosion rather than controlling it, as it helps in creating anelectrochemical cell. Also in the same sheet or component. one part can become anodic whilethe other part can become cathodic. For this reason only, pure metals corrode much moreslowly than the impure ones. Also good house-keeping, for example dusting cars with a featlier,helps in checking dorrosion as it offsets what is known as " differential aeration" effect. Industrialfinishing basically protects the base metal by changing the surface properties, offering sacrificialprotection as in the case of zinc or changing the interface between the base metal and theenvironment. Any defect or holidays , poor adhesion of the coating or high porosity can lead tomore corrosion. Also it should be realized that there are about 120 varieties of corrosion and noone method can be the solution for all problems of corrosion.CONCLUSIONSElectroplating, Anodizing, Painting etc. which have about 80 percent share of the total businessin the Industrial metal finishing are still one of the cheapest and widely used methods to controlcorrosion and form a major component of surface engineering. In fixture, complete restructuringof these processes will become indispensable to deliver what customers need ( in terms of the6Es, shorter lead times, reliability, immediate response) or innovation in terms of new products,processes, finishes and services rather than sticking to traditional way of doing jobs. The gradualdegradation of metallic structures on which the modem world depends- from bridges to nuts andbolts, from automobiles and aeroplanes to boiler tubes and nuclear reactors or petrochemicalcomplexes- is a practical problem of vital importance, especially for India . Indian industries andpracticing engineers certainly are entitled to better protection from corrosion than they have beengetting.7ACKNOWLEDGEMENTThe author is thankful to the Director , National Metallurgical Laboratory, Jamshedpur forpermission to present and publish this paper , as well as for encouragement.BIBLIOCRAPill'A. BOOKS1. Electroplating, F.A.Lowenlreinr, McGraw Bill Book Co., New York, 1978.2. Practical Electroplating Handbook, N.V.Parthasaradhy, Prentice-Hall, NJ, 1989.3. Electroplating and other Surface Treatments, C.D.Verghese, Tata McGraw-Hill, NewDelhi, 1993.4. Modern Electroplating, edited by F.A.Lowenheim, John Wiley & Sons ., NY, 2nd Edition,1963.5. Canning's Handbook of Electroplating, W.Canning & Co ., Birmingham , 1987 (also byCanning Mitra Phoenix , Bombay).6. Electroplating Engineering Handbook, A.K.Graham, Reinhold Pub., NY, 1962.7. Nickel Plating, R.Brugger, Robert Draper, Teddington, 1970.8. Refresher Course in Metal Finishing , ed. K.I.Vasu, Electrochemical Soc, of India,Bangalore, 1974.9. Protective Coatings for Metals, R.M.Burnrs and W.W.Bradly, Reinhold Pub. NY, 1959.10. Analysis of Electroplating & Related Solutions , K.E.Langford & J..E.Parker, RobertDraper , Teddington, 197 1.11. Metals Handbook, Vol.5, American Metals Society, Washington,1987.12. Industrial Electroplating Handbook, Ollard & Smith, Llillc & Sons, USA, 1964.813. Proceedings of the 2nd National Conference on Electroplating and Metal Finishing,SAEST( India), 1981.14. Proceedings of Plating and Finishing Seminar, 1988, SAEST( India), Calcutta, 1989.15. Electrodepasition and Electroforining, ed. E.S.Dwarkadasa, R.P.Dambal andJ.Balachandra, Tata McGraw-Hill, New Delhi, 1988.16. Interdisciplinary Science Reviews, ed. A. R. Michaelis , Vol 17, No.3, 1992.17. Aluminum-Fabrication and Finishing, Vol.111, ed. K.R.Van Horn, American Society forMetals, Ohio, 1967.18. The Technology of Anodizing Aluminum , A.W.Brace , Robert Draper , Teddington, 1960.19. Finishing of Aluminum, Vol.11, S.Wernick and R . Pinner , Robert Draper , Teddington,1972.20. Corrosion and its Control, J.T.N.Atkinson and H.VanDroffelaar, NACE, Texas, 1982.B. JOURNALS1. Journal of the Electrochemical Society of India, Bangalore-560 012..2. Trans. of SAEST(India), Karaikudi-623 006.3. Trans. of Metal Finishers Association of India, Mumbai.4. Metal Finishing, USA5. Trans. Institute of Metal Finishing, UK6. Products Finishing, USA7. Plating and Surface Finishing, American Electroplaters ' Soc., USA.C. AUTHOR'S REFERENCES1. Iron-Cadmium deposits from Sulfate Baths, Metal Finishing , 68, Nc .3, March 1970, p.57.2. Fe-Co-Cd Deposition, Ternary Alloys from Sulfate Bath, Metal Finishing, Vol, 69, No.9,1971, p.52.3. Deposition of Tertiary Alloys from Sulfate Bath- Fe-Co-Zn, Galvanotechnik, Vol.64,1973, p.1015.94. Electrodeposition of Iron Alloys, Trans. SAEST( India ), Vol.19, 1974, P. 101,5. Immersion Plating of Tin and its Alloys, Galvanotechnik, Vol. 70, 1979, p.404.6. A Unique Anti-Tarnish Film by Rhodium Plating , Precious Metal Plating Seminar, byMetal Finishers Association of India, Bombay, 1979.7. Permanent Black Finishes on Aluminum, J.Electrochem . Soc. India , Vol.32, 1983, p.268.8. Silver Plating from non-cyanide baths, ATM-83 of ECSI, Bangalore, 1983.9. A Rapid Process for Electrolytic Colouring of Aluminum and its Alloys, Galvanotechnik,Vol.77, 1986, p.2123.10. Immersion Plating of Tin and its Alloys on Steel Wires, ATM-87 of ECSI, Bangalore,1987.11. Anodes for Electroplating, Seminar on Surface Cleaning and Surface Finishing , IE(I),Jamshedpur, 1991.12. Zinc Plating- Recent Trends and Practical Considerations, NML Technical Journal, Vol.37, No. 2, , 1995, p.61.13. Electrodepositioiz and Non-Electrolytic Deposition Process, Workshop on SurfaceEngineering, by IE(I), Jamshedpur , August 22-24, 1996, p.42.14. Engineering Surfaces for Electronics, National Workshop on EMABAMS-97, by Univ.Sc. Instrumentation Centre, Jadavpur Univ., Calcutta, November 10-13, 1997.15. Processing of defective Nickel-Plated parts with Non-cyanide Chemical Strippers, NMLTech. Journal, Vol.38, No.1, March 1996, p.31.10

Industrial Metal Finishing for Corrosion Control

http://eprints.nmlindia.org/4104/1/S_k_narang-8.PDF

Industrial Metal Finishing for Corrosion Control

Abstract

Similar works

Full text

Available Versions

eprints@NML