The susceptibility of a catchment to flooding during an extreme rainfall event is affected by its soil moisture condition prior to the event. A study to improve the state vector of a distributed hydrologic model by assimilating high resolution remotely sensed soil moisture is described. The launch of Sentinel-1 has stimulated interest in measuring soil moisture at high resolution suitable for hydrological studies using Synthetic Aperture Radars (SARs). The advantages of using SAR soil moisture in conjunction with land cover data are considered. These include the ability to reduce contamination of the surface soil signal due to vegetation, radar artefacts, mixed pixels and land cover classes not providing meaningful soil moistures. Results for 2008 using ASAR data showed
that the assimilation of ASAR soil moisture values improved the predicted flows for all images. The improvement was less marked for 2007, probably because the antecedent soil moisture conditions were of reduced importance during the extreme flooding that occurred then. Particularly for 2008, the higher resolution of ASAR data improved predicted flows compared to low resolution ASCAT data that were not disaggregated and limited to the temporal frequency of ASAR. The method is likely to give better results with Sentinel-1 rather than ASAR data due to its higher temporal resolution