Design And Fabrication Of Two-dimensional Hexagonal Photonic Crystals With A Linear Waveguide In Erbium Doped Geo2-bi2o 3-pbo-tio2 Glasses

Abstract

In this work, we designed and recorded two-dimensional Hexagonal Photonic Crystals (2D-HPC) layers, with a linear waveguide, in erbium doped GeO 2-Bi2O3-PbO-TiO2 glassy films, by combining the techniques of holographic recording and femtosecond (fs) laser micromachining. The 2D-HPC is recorded holographically in a photoresist film coated on a glass substrate by exposing the sample to the same interference pattern twice and rotating the sample of 60° between the exposures. After the development a two dimensional hexagonal array of photoresist columns remain on the glass substrate. The recording of the waveguide is made by a fs laser micromachining system focused at sample surface. The laser spot produces the ablation of the photoresist columns generating a defect line in the periodic hexagonal array. After the recording of the photoresist template, the erbium doped GeO2-Bi2O3-PbO-TiO2 film is evaporated on the photoresist and finally the photoresist template is removed using acetone. The design of the geometrical parameters of the 2D-HPC is performed by calculation of the dispersion mode curves of the photonic crystal using a 2D finite element method. The proper geometrical parameters depend on both the refractive index of the glass film and thickness. Such parameters as well as the period of the 2D-HPC have been defined in order to obtain a photonic band gap in the region of erbium luminescence band. In such condition the erbium luminescence will propagate only through the waveguide. © 2013 SPIE.8776The Society of Photo-Optical Instrumentation Engineers (SPIE)Notomi, M., Shinya, A., Kuramochi, E., Photonic crystals: Towards ultrasmall lightwave circuits (2004) NTTTech. Rev., 2, pp. 36-47Chow, E., Lin, S.Y., Jonhson, S.G., Villeneuve, P.R., Joannopoulos, J.D., Wendt, J.R., Vawter, G.A., Alleman, A., Three-dimensional control of light in a two-dimensional photonic crystal slab (2000) Nature, 407, pp. 983-986Sharp, D.N., Campbell, M., Dedman, E.R., Harrison, M.T., Denning, R.G., Turberfield, A.J., Photoniccrystals for the visible spectrum by holographic lithography (2002) Opt. Quantum Electron, 34, pp. 3-12Carlsson, N., Ikeda, N., Sugimoto, Y., Asakawa, K., Takemori, T., Katayama, Y., Kawai, N., Inoue, K., Design, nano-fabication and analysis of near-infrared 2D photonic crystal air-bridge structures (2002) Opt. Quantum Electron, 34, pp. 123-131Joannopoulos, J.D., Meade, R.D., Winn, J.N., (1995) Photonic Crystals, , Princeton University PressVilleneuve, P.R., Piché, M., Photonic band gaps in two-dimensional square and hexagonal lattices (1992) Phys. Rev. B, 46, pp. 4969-4972Cheng, C.C., Scherer, A., Fabrication of photonic band-gap crystals (1995) J. Vac. Sci. Technol. B, 13, pp. 2696-2700Lai, N.D., Liang, W.P., Lin, J.H., Hsu, C.C., Lin, C.H., Fabrication of two-and three-dimensional periodic structures by multi-exposure of two-beam interference technique (2005) Opt. Express, 13, pp. 9605-9611. , 11O'Brien, J., Kuang, W., Photonic crystal lasers, cavities, and waveguides (2005) Enc. Mod. Optics, 2005, pp. 146-155Gattass, R.R., Mazur, E., Femtosecond laser micromachining in transparent materials (2008) Nat. Photonics, 2 (4), pp. 219-22