Patologías higrotérmicas existentes en cerramientos exteriores construidos con bloques huecos de hormigón o de material cerámico

Abstract

Se realizó un relevamiento de los diferentes tipos de muros ensayados en los laboratorios del INTI durante los últimos años, a los que se determinó su transmitancia térmica. A partir de esta información, se efectuó un estudio higrotérmico de cada uno de ellos, con el objeto de verificar si presentaban riesgos de condensación cuando eran sometidos a condiciones climáticas correspondientes al conurbano de Buenos Aires; mientras que en el ambiente interior se fijaron tanto la temperatura como la humedad relativa, para un nivel mínimo de confort higrotérmico. Se ha comprobado la manifestación de tales patologías higrotérmicas, en inspecciones efectuadas en unidades habitacionales existentes, cuyas paredes se construyeron con muchos de los muros analizados que se presentan en este trabajo. Aquellos casos que no presentaron riesgos de condensación bajo estas circunstancias, fueron sometidos a condiciones de temperatura de invierno más severas, hasta que el sistema constructivo no presente la mencionada patología.Different types of walls tested at INTI during last years were analyzed and their thermal transmittances were determined. Using this information, a hygrothermal study was carried out in order to verify if these walls showed condensation risks when they were exposed to climatic conditions of a town belonging to the bioenvironmental area with moderate hot climate, such as Buenos Aires suburbs. Temperature and relative humidity for interior environment were set to what is established by national standards for the minimum level of hygrothermal comfort. The presence of such hygrothermal pathologies was detected through surveillance carried out in existing housing where walls were constructed like many of the walls analyzed and presented in this work. Those cases that showed no condensation risks under these circumstances were subjected to more severe border conditions from winter hygrothermal point of view in order to get the maximum request that the constructive system can accept without presenting the mentioned pathology.Asociación Argentina de Energías Renovables y Medio Ambiente (ASADES

    Similar works