Present work proposes a novel numerical scheme to calculate stress and velocity fields of metal flow in axisymmetric extrusion process in steady state. Extrusion of aluminium is one main metal forming process largely applied in manufacturing bars and products with complex cross section shape. The upper-bound, slab, slip-line methods and more recently the numerical methods such as the Finite Element Method have been commonly applied in aluminium extrusion analysis. However, recently in the academy, the Finite Volume Method has been developed for metal flow analysis: literature suggests that extrusion of metals can be modelled by the flow formulation. Hence, metal flow can be mathematically modelled such us an incompressible non linear viscous fluid, owing to volume constancy and varying viscosity in metal forming. The governing equations were discretized by the Finite Volume Method, using the Explicit MacCormack Method in structured and collocated mesh. The MacCormack Method is commonly used to simulate compressible fluid flow by the finite volume method. However, metal plastic flow and incompressible fluid flow do not present state equations for the evolution of pressure, and therefore, a velocity-pressure coupling method is necessary to obtain a consistent velocity and pressure fields. The SIMPLE Method was applied to attain pressure-velocity coupling. This new numerical scheme was applied to forward hot extrusion process of an aluminium alloy. The metal extrusion velocity fields achieved fast convergence and a good agreement with experimental results. The MacCormack Method applied to metal extrusion produced consistent results without the need of artificial viscosity as employed by the compressible flow simulation approaches. Therefore, present numerical results also suggest that MacCormack method together with SIMPLE method can be applied in the solution of metal forming processes in addition to the traditional application for compressible fluid flow
