research

Examination of working condition for reducing thickness variation in tube drawing with

Abstract

The present research carried out a series of analyses using the finite element method (FEM). The analyses investigated the effect of working condition on thickness variation after drawing a tube with initial thickness distribution. As a result, it was notably revealed that application of dies with small half angle below 5 degrees was prominently effective for levelling the thickness variation. This effect was strengthen by employing tubes with thicker walls and larger diameters. Moreover, the mechanism of levelling the thickness variation was also examined. The small die angle affects the contact length at die approach, and the contact length at thinnest side becomes longer than that at the thickest side. The difference of the contact lengths equalizes the thicknesses of the thinnest and thickest sides. The analyses also predicted the thickness variation should almost be zero under an optimum condition

    Similar works