The visual analysis of geographically referenced datasets with a large number of attributes is challenging due to the fact

that the characteristics of the attributes are highly dependent upon the locations at which they are focussed and the scale at which they are measured.   Here,  we develop attribute  signatures – interactively crafted graphics that show the geographic variability of statistics of attributes through which the extent of dependency between the attributes and geography can be visually explored.  We compute a number of statistical measures and use them as a basis for our visualizations.  Our methods allow variation in multiple statistical summaries of multiple attributes to be considered concurrently and geographically, as evidenced by an example in which the census geography of two cities in UK are explored

Dykes, J.

Hauser, H.

Slingsby, A.

Turkay, C.

Wood, J.

City Research Online

Turkay, C., Slingsby, A., Hauser, H., Wood, J. & Dykes, J. (2014). Interactive Generation of Visual Summaries for Multivariate Geographical Data Analysis. Paper presented at the GIScience 2014: Eighth International Conference on Geographic Information Science, 23-26 September 2014, Vienna. City Research OnlineOriginal citation: Turkay, C., Slingsby, A., Hauser, H., Wood, J. & Dykes, J. (2014). Interactive Generation of Visual Summaries for Multivariate Geographical Data Analysis. Paper presented at the GIScience 2014: Eighth International Conference on Geographic Information Science, 23-26 September 2014, Vienna. Permanent City Research Online URL: http://openaccess.city.ac.uk/4117/ Copyright & reuseCity University London has developed City Research Online so that its users may access the research outputs of City University London's staff. Copyright © and Moral Rights for this paper are retained by the individual author(s) and/ or other copyright holders.  All material in City Research Online is checked for eligibility for copyright before being made available in the live archive. URLs from City Research Online may be freely distributed and linked to from other web pages. Versions of researchThe version in City Research Online may differ from the final published version. Users are advised to check the Permanent City Research Online URL above for the status of the paper.EnquiriesIf you have any enquiries about any aspect of City Research Online, or if you wish to make contact with the author(s) of this paper, please email the team at publications@city.ac.uk.Interactive Generation of Visual Summariesfor Multivariate Geographical Data AnalysisCagatay Turkay, Aidan Slingsby, Helwig Hauser, Jo Wood, and Jason DykesFig. 1. Attribute signatures are dynamically created in response to interactive geographic selection sequences. A transect throughthe centers of London (polycentric city, left, top) and Leicester (monocentric city, left bottom). Attribute signatures for London (centre)and Leicester (right) are ordered by similarity to that at the top-left of each series of small multiples.Abstract— The visual analysis of geographically referenced datasets with a large number of attributes is challenging due to the factthat the characteristics of the attributes are highly dependent upon the locations at which they are focussed and the scale at whichthey are measured. Here, we develop attribute signatures – interactively crafted graphics that show the geographic variability ofstatistics of attributes through which the extent of dependency between the attributes and geography can be visually explored. Wecompute a number of statistical measures and use them as a basis for our visualizations. Our methods allow variation in multiplestatistical summaries of multiple attributes to be considered concurrently and geographically, as evidenced by an example in whichthe census geography of two cities in UK are explored.Index Terms—Visual analytics, multivariate data, geographic information1 INTRODUCTIONIn some domains, multivariate data have a strong geographical compo-nent which dominates variation. Examples include population demo-graphics, multivariate spatial interaction models, species distributionmodels and land-use models. Knowing how multiple attributes varyover space is critical in interpreting the phenomena that these data andmodels represent.Designing mechanisms to support the exploration of the geograph-ical variation in multiple attributes simultaneously is challenging dueto the specific characteristics that geographical data have [1]. Geo-graphical distributions tend to be heterogeneous and are often strongly• Cagatay Turkay, Aidan Slingsby, Helwig Hauser, Jo Wood, and JasonDykes are with the Dep. of Computer Science, City University London,UK. E-mail: {Cagatay.Turkay.1, Aidan.Slingsby.1, J.D.Wood,J.Dykes}@city.ac.uk• Helwig Hauser is with the Department of Informatics, University ofBergen, Norway. E-mail: Helwig Hauser@ii.uib.no.Manuscript received 31 March 2013; accepted 1 August 2013; posted online13 October 2013; mailed on 4 October 2013.For information on obtaining reprints of this article, please sende-mail to: tvcg@computer.org.related and influenced by topographic features. Some phenomena varygreatly, such as population density – a phenomenon that is highly de-pendent upon the extent of the spatial units used to measure it as wellas the location at which it is measured.Maps are often appropriate means for depicting geographical vari-ation in data, graphically. However, this is only really effective wherethere are few attributes. Since maps already use position- and size-related visual variables, visual variables for depicting other attributesare limited. Choropleth maps [9] and geographical heatmaps [15] con-vey data using different aspects of colour, including lightness, satura-tion and hue. Additional attributes can be added by combining morevisual variables or by using glyphs or other embedded matrices, butoften at the expense of the geographical resolution at which the dataare displayed. Additionally, interactive techniques are widely used tohelp make sense of many variables. These often avoid the problem ofdepicting spatial variation directly by facilitating geographical filter-ing. This usually results in non-geographical graphical depictions ofthe multiple attributes for one location only (e.g. [8]).In this paper, we consider key issues associated with the geo-graphic variation of multivariate data and develop interactive visualapproaches to support the analysis of such datasets. We design, dis-cuss and demonstrate how this can be done using map brushing inmultiple coordinated views that show how multiple attributes vary inAxis of comparisonAxis of variationComparison baselineFig. 2. An attribute signature represents changes in a single (or more)attribute along the axis of variation. The x-axis is the axis of variation,corresponding to the geographical aspect (location, extent or resolu-tion) interactively defined by the user. The y-axis represents changein the computed statistics in response to this, comparing dynamicallycomputed values to an appropriate baseline.geographical space, extent and resolution. We introduce dynamicallygenerated visual summaries, called attribute signatures, of how datavaries along geography.When these visual summaries are generated, we consider differentaspects that may vary independently at various geographical scales.Within the context of this paper, we distinguish three aspects of spacethat are the basis of our analysis: location, scale extent and scale reso-lution [6]. Location is the geographical point at which a measurementis made. Scale extent (or domain) is the geographical extent arounda location that is under consideration that defines an area [6]. Scaleresolution is the amount of detail that is considered in characterisinga location. It may be related to sampling strategy or data availabil-ity. The nature of the summaries will change as they are computed atthese different spatial resolutions – an understanding of which revealsthe scales at which homogeneity or heterogeneity exist in different as-pects of population.We use a single data set dataset through this paper to demonstratethe methods developed for analyzing multivariate geographic data. Itconsists of records taken from the UK Census of Population for the181,000 output areas (OA) of England and Wales [7]. Each OA has 41attributes associated with it, those deemed discriminating in develop-ing the Output Area Classifier (OAC) [14] The result is a 41 x 181,000multivariate table of values containing geographic characteristics.2 ATTRIBUTE SIGNATURESAn attribute signature depicts a user-defined geographical variation ofan attribute using one or more summary statistics as a sparkline [10].Figure 2 illustrates how these aspects are represented in an instance ofan attribute signature. The axis of variation (x-axis) represents eitherSL, SE or SR. When plotted against the axis of comparison (y-axis),variation in the attribute along the axis of variation is depicted usingone or more summary statistics (section 2) compared to an appropriatebaseline.For each attribute, we construct a single attribute signature and ar-range these using ordered juxtaposition [5] as a series of small mul-tiples [11], one for each attribute (see Figure 1, right). These can beordered in various configurations according to their similarity. Thesmall multiples view is a component of a multiple-coordinated viewsenvironment in which interactive selections can be performed on loca-tion, extent and resolution on a map view to undertake location, extentand resolution style analysis. Linking signatures to a map view canbe seen in Figure 1. Here, the user performs a sequence of selectionson the map and the attribute signatures are generated dynamically inresponse to support SLc analysis. Since we are varying location (bymoving the selection on the map) location becomes the variation axison the signatures. For each point on x-axis, a comparative statistic(e.g. normalized difference between means) is computed between theselection and the baseline.Statistical summaries for comparison : In response to theinteractive selections on a map, we dynamically compute statistics tohelp investigate how attributes vary along the axis of variation. We em-ploy a multiple-coordinated views approach, in which brushing on amap geographically conditions the data. Each attribute is summarisedwith a summary statistic relating to this area using Turkay et al.’smethods [12] whereby the statistic λ , e.g., a descriptive statistic suchas mean µ or standard deviation σ , is computed using only the datapoints that are selected Si at a particular location i on the variation axis.We then compare these “locally” computed results λ Si to a baselinevalue λBi to calculate the difference at location i with: ∆i = λSi−λBisimilar to difference plots by Turkay et al. [13]. These computationsare undertaken in real time for all the attributes, so ∆i and λ are vectorsof size p – the number of attributes in the data.Linking signatures : To more effectively study how the at-tributes vary over space, we display the path along which the map wasbrushed or display the set of discrete locations selected (see Figure 1).This has the effect of leaving trails on the map. This allows us to seehow attributes vary as we move along the trail on the map. Highlight-ing the interaction location along the x-axes of all signatures ensuresthat signatures are interactively linked to each other (via small dotsdisplayed on the sparklines) and to the location and extent on the mapat which the summary statistics are computed (via a path and a rect-angle showing the selection). Moreover, bidirectional linking betweenthe map and attribute signatures enable the identification of locations,extents or resolutions at which variations in the statistics occur. Thistype of linking between the map and abstract visual representationsis shown to be effective in understanding the urban structures [3] andsupporting multi-focus analysis in the paper by Butkiewicz et al. [2]where the authors developed probes to aggregate data on several loca-tions on the map.Key-framed brushing : In order to support users in developingtheir selection sequences we also introduce a semi-automated inter-action mechanism called keyframed brushing. This method aids theuser in quickly defining selection sequences that are precisely struc-tured, by making equally placed selections that follow a straight line.This provides a regular spatial sample across any linear transect. Inthis mechanism, the user defines two or more brushes (according totheir analytical goal) and using these key brushes, a sequence of in-tervening brushes are generated automatically over a linear path thatconnects these key brushes. After the brush sequence is computed, thesystem starts traversing through this without the need for further inputby the user.3 ANALYSIS EXAMPLE – TRANSECTS THROUGH CITIESHere, we present an analysis example where attribute signatures areutilized. Inspired by Duany’s concept of the ‘urban transect’ [4], weexplore transects through London (a polycentric city) and Leicester (amonocentric city) in this example. We employ our key-framed brush-ing mechanism to create a linear west-east transect that starts at thewesternmost outskirts of a city, passes through the center and contin-ues to the eastern outskirts (Figure 1). We report values in attributesignatures using effect size and local baselines so we can compare lo-cal variation in cities.Attribute signatures across London (Fig. 1, center, left-top) are var-iously shaped as m, v, u or n – highlighting differences between innerand outer London, with significant differences in central London forthe m-shaped signatures, such as for commuting using public trans-port.The lack of symmetry as we move across London reveals interestingstructure, such as the low proportion of home workers, high proportionof infants and proportion of adults separated or divorced at the easternfringes of the city compared to the west. These figures vary signifi-cantly despite other similarities between the east and west ends of thecity relating to population density, tenure and the data on commuting.In Leicester (Fig. 1, right, left-bottom) the very sharp dips or peaksat a single location at the city centre for attributes such as % of de-tached houses, % of children, or % people living alone reflects theconcentration of students and young professionals living in apartmentsin this part of town, which is distinct in character from the other loca-tions along the selected path. This is typical of a monocentric city andthe variation is captured with the scale of the extent used here.4 CONCLUSIONSOur stated aim is to develop techniques to help understand how mul-tiple attributes vary over space as a means of gaining knowledge ofthe phenomena represented by geographic data. Being able to accessthese different representations of the data and perform comparative vi-sual analysis on them simultaneously is important in dealing with thecharacteristics of geographic data that make them interesting. It en-ables us find and present the stability, or otherwise, of the numbersthat we compute to describe geography and use broad visual channelsto show how they vary using visualization methods that are applicableto a broad range of multivariate geographic data.REFERENCES[1] L. Anselin. What is special about spatial data?: alternative perspectiveson spatial data analysis. National Center for Geographic Information andAnalysis Santa Barbara, CA, 1989.[2] T. Butkiewicz, W. Dou, Z. Wartell, W. Ribarsky, and R. Chang. Multi-focused geospatial analysis using probes. IEEE TVCG, 14(6):1165–1172,2008.[3] R. Chang, G. Wessel, R. Kosara, E. Sauda, and W. Ribarsky. Legiblecities: Focus-dependent multi-resolution visualization of urban relation-ships. IEEE TVCG, 13(6):1169–1175, 2007.[4] A. Duany. Introduction to the special issue: The transect. Journal ofUrban Design, 7(3):251–260, 2002.[5] M. Gleicher, D. Albers, R. Walker, I. Jusufi, C. D. Hansen, and J. C.Roberts. Visual comparison for information visualization. InformationVisualization, 10(4):289–309, 2011.[6] N. S.-N. Lam and D. A. Quattrochi. On the issues of scale, resolution andfractal analysis in the mapping sciences. The Professional Geographer,44(1):88–98, 1992.[7] Office for National Statistics. Census Dataset Finder - Data Explorer(Beta) - http://j.mp/onsDX, 2014.[8] A. Slingsby, J. Dykes, and J. Wood. Exploring uncertainty in geode-mographics with interactive graphics. IEEE TVCG, 17(12):2545–2554,2011.[9] T. A. Slocum. Thematic cartography and visualization. Prentice hallUpper Saddle River, NJ, 1999.[10] E. Tufte. Sparklines: Intense, simple, word-sized graphics. BeautifulEvidence, 1:46–63, 2004.[11] E. R. Tufte. The visual display of quantitative information. GraphicsPress, Cheshire, CT, 1983.[12] C. Turkay, P. Filzmoser, and H. Hauser. Brushing dimensions – a dual vi-sual analysis model for high-dimensional data. IEEE TVCG, 17(12):2591–2599, dec. 2011.[13] C. Turkay, A. Lex, M. Streit, H. Pfister, and H. Hauser. Characterizingcancer subtypes using dual analysis in caleydo stratomex. IEEE CG&A,34(2):38–47, Mar 2014.[14] D. Vickers and P. Rees. Introducing the national classification of censusoutput areas. Population Trends, 125:380–403, 2007.[15] L. Wilkinson and M. Friendly. The history of the cluster heat map. TheAmerican Statistician, 63(2), 2009.

Interactive Generation of Visual Summaries for Multivariate Geographical Data Analysis

Abstract

Similar works

Full text

Available Versions

City Research Online