Monitoritzar i automatitzar el funcionament del túnel de vent del laboratori d'Enginyeria Aeroespacial. Es vol substituir el funcionament manual actual per un d'automatitzat, de forma que es puguin programar assajos i adquirir les dades de forma automàticaThe ETSEIAT’s aerospace engineering laboratory’s wind tunnel used to vary
its airflow speed thanks to a potentiometer and the air properties were
manually measured. Hence, monitoring the tunnel’s behaviour was the goal.
This aim was to be achieved by making use of an Arduino, the proper sensors
and genuine software in order to have better control of the velocity and to
gather data automatically.
Taking this into consideration, a Matlab code which interacts with Arduino
was created. It collects the temperature, the atmospheric pressure and the
differential pressure at the nozzle, and saves and plots in real time all the data.
Moreover, it calculates and stores the air speed as well as comparing it to the
desired velocity so as to obtain the error, which is aimed to be minimized, and
is later on processed by a PID controller.
After mounting the whole system with the appropriate hardware, the sensors
were tested and some of them re-calibrated to reduce, as much as possible, all
the uncertainties and get a simultaneously efficient, accurate and robust
system.
Once all the difficulties have been solved it is possible to say that the project
has finally been carried out with a greatly satisfactory result and it will be a
useful tool for the university