Faculty of Mechanical Engineering University of Zilina, Slovak Republic
Abstract
The theoretical and experimental analyses of the friction welding pressure influence on the plastic deformation level and the quality of the friction welded joint are presented in this paper. The joint of the tempering and the High-Speed steel was realized by the friction welding. The objective was to relate the two basic process parameters - the friction and compacting pressures - to plastic deformation parameters during the friction welding of two the steels. The fact that materials are dissimilar additionally complicates the welding procedure and its analysis. The friction welding is a specific and complex process, since in the joint zone material is heated and plasticized with necessary action of the multi-step pressure to realize the joint. The total deformations in the axial and radial directions are directly dependent on the applied welding pressure. Considering that geometry and shape of the friction welded joint directly depend on the friction pressure, some welded joints' basic shapes obtained with various pressures are presented. The experimental investigation was conducted on cylindrical samples made of the two steels and the analysis of results served for establishing the influences of the friction and compacting pressures on changes of the steel samples dimensions and shapes.
