We investigated a switchable ferroelectric diode effect and its physical
mechanism in Pt/BiFeO3/SrRuO3 thin-film capacitors. Our results of electrical
measurements support that, near the Pt/BiFeO3 interface of as-grown samples, a
defective layer (possibly, an oxygen-vacancy-rich layer) becomes formed and
disturbs carrier injection. We therefore used an electrical training process to
obtain ferroelectric control of the diode polarity where, by changing the
polarization direction using an external bias, we could switch the transport
characteristics between forward and reverse diodes. Our system is characterized
with a rectangular polarization hysteresis loop, with which we confirmed that
the diode polarity switching occurred at the ferroelectric coercive voltage.
Moreover, we observed a simultaneous switching of the diode polarity and the
associated photovoltaic response dependent on the ferroelectric domain
configurations. Our detailed study suggests that the polarization charge can
affect the Schottky barrier at the ferroelectric/metal interfaces, resulting in
a modulation of the interfacial carrier injection. The amount of
polarization-modulated carrier injection can affect the transition voltage
value at which a space-charge-limited bulk current-voltage (J-V) behavior is
changed from Ohmic (i.e., J ~ V) to nonlinear (i.e., J ~ V^n with n \geq 2).
This combination of bulk conduction and polarization-modulated carrier
injection explains the detailed physical mechanism underlying the switchable
diode effect in ferroelectric capacitors.Comment: Accepted for publication in Phys. Rev.