technical reportModules in HOP are black-boxes that are understood and used only in terms of their interface. The interface consists of d a t a ports, events, and a protocol specification that uses events and asserts/queries values to / from ports. Events are realized as different combinations of control wires or as predicates defined over data conduits. Module await either command events or status events. Data conduits are realized as bus structures that deliver the same data items at the receiving end as items sent at t h e sending end (i.e. the busses do not have any wire-permutations, tappings, etc.). HOP is useful for writing both requirements (a priori) specifications and design (a posteriori) specifications. The manner in which requirements are expressed has usually no bearing on the actual implementation chosen later. Design specifications capture known facts about a system that has been built or has been designed in detail. In a HOP based design methodology, design proceeds hierarchically, and on many occasions (but not always) top-down. For most large systems, t h e requirements specification consists of the specification of a collection of modules and not one module; for these systems, the single module view is only derived a posteriori
