Angel, Jais Andreas Breusch

De Chiffre, Leonardo

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 18, 2017Inter laboratory comparison on Industrial Computed TomographyCIA-CT comparisonAngel, Jais Andreas Breusch; De Chiffre, LeonardoPublication date:2014Link back to DTU OrbitCitation (APA):Angel, J. A. B., & De Chiffre, L. (2014). Inter laboratory comparison on Industrial Computed Tomography: CIA-CT comparison. Poster session presented at 5th International Conference on Industrial Computed Tomography,Wels, Austria.                  Item 1 (Polymer part).                              Item 2 (Metal part).                 The 27 participants in the CIA-CT circulation.                         Zeiss UPMC 850 CARAT.                              Zeiss OMC 850.            En values for measurement of  D1, R1 and L1 on Item 1.                  En values for measurement of  D1, R1, D2, R2 and L1 on Item 2.  CIA-CT comparison  Comparison participants An interlaboratory comparison on industrial X-ray Computed Tomography (CT) was organized by the Centre for Geometrical Metrology (CGM), Department of Mechanical Engineering, Technical University of Denmark (DTU) and carried out in 2013 within the project “Centre for Industrial Application of CT scanning - CIA-CT”. 27 laboratories from 8 countries were involved.  Items and reference measurements Two items were selected among common industrial parts: a polymer part and a metal part. Different measurands were considered, encompassing diameters, roundness, and lengths. All single items were measured at CGM using coordinate measuring machines (CMMs) before and after circulation. Both the metal item and the plastic item have shown a good stability over the 6 months of the comparison. Average reference expanded (k=2) measurement uncertainties in the range 1.5-5.5 µm were estimated.   Analysis of participants’ data The participants stated average expanded uncertainties in the range 6-15 µm with maximum values up to 51 µm. Results by the single participants were compared with the reference values through the En value, where |En| < 1 indicates agreement between measurement results while |En| ≥ 1 shows disagreement. Out of a total of 167 single results, 54% of the measurements yield |En| values less than 1, and 46% values larger than 1. Systematic errors were detected for some participants on the diameters and lengths. Plausible  measurement uncertainties were recalculated for the measurements connected to |En| values above 1. The comparison has shown that CT measurements on the small industrial parts that have been used can be divided in two groups. A group with average measurement uncertainties in the range 6-15 µm, and a group with average uncertainties in the range 14-53 µm, and maximum values up to 158 µm, compared to average uncertainties below 5.5 µm using CMMs. The comparison has shown that the two industrial items are suitable artefacts for CT measurements of this kind.  References 1. J. Angel, L. De Chiffre, E. Larsen, J. Rasmussen, R. Sobiecki, CIA-CT comparison, Reference Measurements, Department of Mechanical Engineering, Technical University of Denmark, 2013. 2. J. Angel, L. De Chiffre, CIA-CT comparison, Final Report, Department of Mechanical Engineering, Technical University of Denmark, 2013.    Mechanical Engineering , Produktionstorvet, Building 425, DK 2800 - Kgs. Lyngby,  Phone: +45 4525 4760, E-mail: ldch@mek.dtu.dk jaia@mek.dtu.dk  Web: www.dtu.dk  www.cia-ct.mek.dtu.dk www.cgm.dk  www.ipu.dk     Inter laboratory comparison on Industrial Computed Tomography 5th International Conference on Industrial Computed Tomography (iCT),                                             25th – 28th February 2014 Wels, Austria Jais Angel, Leonardo De Chiffre 

Inter laboratory comparison on Industrial Computed Tomography:CIA-CT comparison

http://orbit.dtu.dk/ws/files/89309854/Inter_laboratory_comparison.pdf

Inter laboratory comparison on Industrial Computed Tomography:CIA-CT comparison

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology