Overall buckling of lightweight stiffened panels using an adapted orthotropic plate method

Abstract

The ultimate longitudinal bending strength of thin plated steel structures such as box girder bridges and ship hulls can be determined using an incremental–iterative procedure known as the Smith progressive collapse method. The Smith method first calculates the response of stiffened panel sub-structures in the girder and then integrates over the cross section of interest to calculate a moment–curvature response curve. A suitable technique to determine the strength behaviour of stiffened panels within the Smith method is therefore of critical importance. A fundamental assumption of the established progressive collapse method is that the buckling and collapse behaviour of the compressed panels within the girder occurs between adjacent transverse frames. However, interframe buckling may not always be the dominant collapse mode, especially for lightweight stiffened panels such as are found in naval ships and aluminium high speed craft. In these cases overall failure modes, where the buckling mode extends over several frame spaces, may dominate the buckling and collapse response. To account for this possibility, an adaptation to large deflection orthotropic plate theory is presented. The adapted orthotropic method is able to calculate panel stress–strain response curves accounting for both interframe and overall collapse. The method is validated with equivalent nonlinear finite element analyses for a range of regular stiffened panel geometries. It is shown how the adapted orthotropic method is implemented into an extended progressive collapse method, which enhances the capability for determining the ultimate strength of a lightweight stiffened box girder