'American Institute of Aeronautics and Astronautics (AIAA)'
Doi
Abstract
This paper presents an aeroservoelastic modeling approach for dynamic load alleviation
in large wind turbines with trailing-edge aerodynamic surfaces. The tower, potentially on a
moving base, and the rotating blades are modeled using geometrically non-linear composite
beams, which are linearized around reference conditions with arbitrarily-large structural
displacements. Time-domain aerodynamics are given by a linearized 3-D unsteady vortexlattice
method and the resulting dynamic aeroelastic model is written in a state-space
formulation suitable for model reductions and control synthesis. A linear model of a single
blade is used to design a Linear-Quadratic-Gaussian regulator on its root-bending moments,
which is finally shown to provide load reductions of about 20% in closed-loop on the full
wind turbine non-linear aeroelastic model