Publication Board, Japanese Journal of Applied Physics
Abstract
Graphene contacts to p-GaN are considered as an alternative to indium–tin-oxide transparent electrodes in GaN based vertical-cavity surface emitting lasers (VCSELs). Contact properties were investigated on light-emitting diode and p-GaN test structures, where dielectric apertures were
used to eliminate the influence of the metal pads used to bias the contacts. Using single layer graphene we were able to operate light emitting diodes with current densities of 300 A/cm2. Addition of a second layer of graphene increased the maximum bias current to 1 kA/cm2. However, the contacts are non-linear and cannot withstand high current densities for a long time. The results are promising but further investigation and improvement is needed for graphene to be a viable alternative to indium–tin-oxide for blue VCSELs.status: publishe