Batkov, K.

Klinkby, Esben Bryndt

Mezei, F.

Zanini, L.

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 20, 2017First investigations of possibilities for a through-going UCN tube at the ESSKlinkby, Esben Bryndt; Batkov, K.; Zanini, L.; Mezei, F.Publication date:2013Link back to DTU OrbitCitation (APA):Klinkby, E. B., Batkov, K., Zanini, L., & Mezei, F. (2013). First investigations of possibilities for a through-goingUCN tube at the ESS. Poster session presented at Workshop on fast neutron applications at spallation sources,Abingdon, United Kingdom.First investigations of possibilities for a through-going UCN tube at the ESSE. Klinkby1,2, K. Batkov1, L. Zanini1, F. Mezei11European Spallation Source ESS AB, 2DTU NutechPunching a hole in the ESS Target monolith[1] ESS Technical Design Report, April 23, 2013. ESS-doc-274,[2] E. Klinkby et al, Proceedings of the Eleventh International Topical Meeting of Nuclear Applications of Accelerators (AccApp 13). In preperationHeat-loadThe European Spallation Source (ESS), presently starting construction in Lund, Sweden, will be the most intense source of spallation neutrons ever built[1]. Protons from a 5MW, 2.5GeV linear accelerator will impact a rotating tungsten target in 14, 2.86ms long pulses every second. The spallation neutrons hereby created are thermalized in water and some of them are further cooled in liquid para-hydrogen before extracted through individual beam-lines serving 22 cold/thermal instruments.In the present study, we investigate the possibilities of installing a through-going beam-tube for in-pile ultra cold neutron (UCN) extraction at the ESS.The study is guided by the requirement that the performance of the existing 22 cold/thermal beamlines cannot be seriously affected – i.e. the cold/thermal neutron flux at the instruments must be ~unaffected by the introduction of a tube.Please refer to [2] for a more detailed information. ➢ 25cm x 25cm through-going beamtube placed perpendicular to the proton beam)➢ The beam-tube height is varied between: – Upmost position y=-33.5cm (central in the tube)–  Lowest position y=-50.0cm (central in the tube)➢ Impact: Detectors placed at the monolith boundary (beam extraction), and measure time-averaged cold+thermal flux relative to baseline designImpact on cold/thermal beamlinesThrough-going beam-tube introduced in the Baseline ESS target monolith geometry [1]Cold/thermal flux available for UCN moderatorUCN @ ESSXYXY viewUpmost positionThrough-going tubePara-H moderatorCold/thermal extractionBe inner reflectorSteel outer reflectorYZ view   = approximateposition of detectorsmeasuringcold/thermal fluxZX view➢ Cold spectrum: baseline vs beam-tube.➢→ Differences are minor.–  Inserts show the  difference (upper) and ratio (lower) between the two spectra➢Cold (0-5meV),➢ Intermediate (5-20meV) and thermal (20-100meV) flux reduction (relative to baseline) in the lower beam-lines as a function of integrated cold/thermal flux available for UCN moderation➢ The upper beam-lines are unaffected.➢Flux profile centrally under the lower cold para-H moderator➢Average cold/thermal (0-100meV) flux reduction (relative to baseline) in the lower beam-lines as a function of vertical position of the through-going tube.➢ The upper beam-lines are unaffected.➢To estimate heat-load a dummy para-H moderator (16cm x 16cm x 16cm) is placed centrally in the through-going tube.Conclusions & prospects➢ Depending on tube position, flux of up to    2×1013 n/s/cm2 can be achieved (central in tube)➢ Flux-impact on lower instruments ≤ 5% (0-100meV)➢ Spectra at beam-ports (i.e. non-UCN    instruments)  ~unaltered➢ The heat-load range: 0.06 – 0.20 W/cm3    (measured in paraH)➢Future:➢ Test various moderator concepts, including  cooling considerations➢ Look into UCN time structure. Exploitable..?

First investigations of possibilities for a through-going UCN tube at the ESS

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology

Online Research Database In Technology