Hollós, E.

English

Periodica Polytechnica (Budapest University of Technology and Economics)

TWO-PORT MODELS CONTAINING NULLATORS AND NORATORS By E. HOLLOS Department of Theoretical Electricity. Technical University Budapest Received: March 3.1981 Presented by ProI'. Dr. I. V,\GO Two-ports in active networks treatable as linear are commonly characterized by a system of parameters. Models of a two-port characterized by its impedance, admittance, hybrid or inverse hybrid parameters, containing nullators, norators and impedances can be given [1, 2]. The current and voltage of a nullator (Fig. 1) are known to be zero, the norator (Fig. 2) is a two-pole with both its current and voltage of arbitrary value. Two-port models are derived by applying equivalent circuits containing nullators and norators for controlled sources. Models of controlled sources are known [1, 2J, with one pole of the primary and secondary sides being common (Fig. 3). By their application two-ports characterized by impedance, admit-tance, hybrid or inverse hybrid parameters can be modelled by equivalent circuits with one pole of the primary and secondary sides being on the same potential (Fig. 4). This circumstance reduces the applicability of these connections. In this paper, models are presented, eliminating this short-circuit between the two poles. Models of controlled sources are given in Fig. 5. Equivalent circuits for further two-ports are hence derived as follows (Fig. 6). Selecting the models of the two controlled sources corresponding to the relationships described by the elements outside the main diagonal of the parameter matrix characterizing the two-port. a norator or nullator is connected to one pole at their primary or secondary sides. Nullator is connected to the pole at the primary or secondary side if the controlled source serves to ensure the prescription relating to the primary or secondary voltage, and a norator if the prescription concerns the current. The models thus supplemented are connected as shown in Fig. 7. Fig. J Fig . .; 1 * 168 Denominati on current-controlled voltage -source voltage-controlled current-source current-controlled current-source vol tage-contro I led voltage-source Characteristic eq'~ation U· = Z" z'2 U2 Z21 222 L-l; = Y'l 112 1.2 /2; 122 ...J t-U, h·.· h'2 12 n2• ho_ , E. HOLLOS circuits u· , ~---' ---~ Fig. 3 Equ ivalent I: U· .1.2 U, u-L I. U, U· Fig. 4 It is indicated by the equivalent circuits drawn in Figs 6 and 8 that the desired aim can be attained by the insertion of a resistance or a nulla tor and a norator. The models of an ideal transformer. a negative impedance converter and a gyrator are drawn in Fig. 8. In case of the application of the models mentioned, network analysis is possible by the method of node potentia Is or by other methods known from literature [1, 3,4]. The number of nodes and branches is naturally greater in the Denomination current -controlled vc! to g2-S0:.JrCe voltage-centre lied current-SOurce cu rrent-contio! led C'.jrrent-source voltage- controlled vcltage-source Characteristic equation u· " z" z,= u. J Z2~ z~..., r· I'! Y'I y.= I: _ J2' Ye, MODELS COXTA/"'/SG ,\TLLATORS MiD SORATORS -r~· Ll:: t: J-I 'I Equivalent circuits ---)or, ..;-12 ~U,=O y 0 Oz ~ ,U2 U. 1 I J -j c--~ I;~~I2 'J. 8 0 U2 Fig. 5 Equlva lent circuit " u· U. U. ..r.. _~ T. Fig. 6 controlled source 1 controlled source 2 Fig. 7 I· !.JZ T ~2u: 1-U-r ..0-169 170 Denomination ,deal transformer Characterist ic equation E. HOLLOS Equivalent clrc'Jit u, ; , y 80 R,2 9 8 eR2 0 R2 • • c::l' l' Fig. " models shown in Figs 6 and 8 than in those seen in Fig. 4. Therefore. if it is possible. the application of the latter is more advantageous. Since the equivalent circuits in Figs 5. 6 and 8 contain nullator-norator pairs, the models constructed with their aid permit to reduce the network synthesis to two-pole synthesis. Summary Models (ontaining nullators. norators and impedan(es are known for two-ports characterized by impedance. admittano;. hybrid or inverse hybrid parametas v.ith one pole of the primary and se(ondar) sides on the same potential. The paper presents equivalent (ir(uits with no short circuit between the two poles. The application of such models permits the performan(e of anal)sis for a wider range of ndworb than do the models known earlier. References I. V .. \00. l.: Application of graph theory in the calculation of electrical networks. (In Hungarian) Muszaki Konyvkiado. Budapest. 1976. 2. Y.~Go. I.-HoLlOS. E.: Two-port models with nulla tors and norators. Periodica Polytechnica EL Eng. If (1973) p. 301-309. 3. V .. \00. l.: Calculation of network models containing nullators and norators. Periodica Polytechnica EL Eng. 17 (1973) p. 311-319. 4. DA VIES. A. C.: Matrix analysis of networks containing nullators and norators. Electronics Letters 1966. p. 48-49. Edit HOLLOS H-1521 Budapest 

TWO-PORT MODELS CONTAINING NULLATORS AND NORATORS

https://pp.bme.hu/ee/article/download/4777/3882

TWO-PORT MODELS CONTAINING NULLATORS AND NORATORS

Abstract

Similar works

Full text

Available Versions

Periodica Polytechnica (Budapest University of Technology and Economics)