This paper demonstrates the use of linear programming methods as applicable in the manufacturing industry. Data were collected as extracts from the records of KASMO Industry Limited, Osogbo, Nigeria, on four types of sales packages adopted for selling her medicated soap product which include 1 tablet per pack, 3 tablets per pack, 12 tablets per pack and 120 tablets per pack. Information on selling price per pack and on the cost of five basic raw materials used as well as the quantity of each of the raw material held in stock per month for the production of soap tablets were available in the records of the company. Based on the costs of raw materials, the maximum profit that would accrue to the company given the product mix was determined. The results showed that the company would attain optimal monthly profit level of about N271,296 if she concentrates mainly on the unit sales (one tablet per pack) of her medicated soap product, ignoring other forms of sales packages. By this, her sales turn-over per month would be about 18,900 soap tablets. The analysis was carried out with R statistical package (www.cran.org) using the library “lpSolve”. Key Words: Linear programming, Simplex Method, Objective function, Product mix, R software

Adeyosoye, Adekunle Ezekiel

Garba, Muhammed Kabir

Ige, Samuel Oluwasuyi

Yahya, Waheed Babatunde

English

International Institute for Science, Technology and Education (IISTE): E-Journals

European Journal of Business and Management                                        www.iiste.org ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online) Vol 4, No.17, 2012  126  Profit Maximization In A Product Mix Company Using Linear Programming Waheed Babatunde Yahya1*, Muhammed Kabir Garba1, Samuel Oluwasuyi Ige2 and Adekunle Ezekiel Adeyosoye1  1. Department of Statistics, University of Ilorin, P.M.B. 1515, Ilorin, Nigeria. 2. Department of Mathematics and Computer Studies, Federal Polytechnic, Ado-Ekiti, Nigeria. * E-mail of corresponding author: wbyahya@unilorin.edu.ng  Abstract This paper demonstrates the use of linear programming methods as applicable in the manufacturing industry. Data were collected as extracts from the records of KASMO Industry Limited, Osogbo, Nigeria, on four types of sales packages adopted for selling her medicated soap product which include 1 tablet per pack, 3 tablets per pack, 12 tablets per pack and 120 tablets per pack. Information on selling price per pack and on the cost of five basic raw materials used as well as the quantity of each of the raw material held in stock per month for the production of soap tablets were available in the records of the company. Based on the costs of raw materials, the maximum profit that would accrue to the company given the product mix was determined. The results showed that the company would attain optimal monthly profit level of about N271,296 if she concentrates mainly on the unit sales (one tablet per pack) of her medicated soap product, ignoring other forms of sales packages. By this, her sales turn-over per month would be about 18,900 soap tablets. The analysis was carried out with R statistical package (www.cran.org) using the library “lpSolve”.  Key Words: Linear programming, Simplex Method, Objective function, Product mix, R software. JEL Classification: C40, C44, C61 1. Introduction Linear programming (LP) can be defined as a mathematical technique for determining the best allocation of a firm’s limited resources to achieve optimum goal. It is also a mathematical technique used in Operation Research (OR) or Management Sciences to solve specific types of problems such as allocation, transportation and assignment problems that permits a choice or choices between alternative courses of action (Yahya, 2004). Linear programming is a term that covers a whole range of mathematical techniques that is aimed at optimizing performance in terms of combinations of resources (Lucey, 1996). Linear Programming being the most prominent OR technique, it is designed for models with linear objective and constraint functions. A LP model can be designed and solved to determine the best course of action as in a product mix subject to the available constraints.  Generally, the objective function may be of maximization of profit (which is the focus of this paper) or minimization of costs or labor hours. Moreover, the model also consists of certain structural constraints which are set of conditions that the optimal solution should justify. Examples of the structural constraints include the raw material constraints, production time constraint, and skilled labour constraints to mention a few. An optimum solution is a solution that fulfills both the constraints of the problem and the set objective to be met. The term “linear”, as stated by Akingbade (1996), implies proportionality, which means that the elements in a situation are so connected that they appear as straight line when graphed. While the “programming” indicates the solution method which can be carried out by an iterative process in which a researcher advances from one solution to better solution until a final solution is reached which cannot be improved upon. This final solution is termed the optimal solution of the LP problem. This work demonstrates the pragmatic use of linear programming methods in a manufacturing company in Nigeria – European Journal of Business and Management                                        www.iiste.org ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online) Vol 4, No.17, 2012  127  KASMO Industry Limited. The problem addressed here was to determine the product mix (combination of sales package) to be adopted by the company for selling her medicated soap product at which the optimal profit level would be attained.  2. Materials and Methods The dataset used for this work was collected as extracts from the records of KASMO Industry Limited, Osogbo, Osun State, Nigeria on her main product line (medicated soap) and four different types of sales packages adopted for selling her soap product in 2010. These four types of sales packages include sales in 1 soap tablet (unit sales), sales in 3 soap tablets (3 tablets per pack), sales in dozen soap tablets (12 tablets per pack), and sales in carton soap tablets (120 tablets per pack). The marketing strategy of the company is to ensure a relative reduction in the selling price per unit of soap tablet as the number of units in each pack increases. This was designed to encourage wholesales purchase of the soap product by the users.  Data on the five basic raw materials used for the manufacturing of KASMO medicated soaps were available in the records of the company. These raw materials are Caustic soda, Palm Kernel Oil (PKO), Colourant, Perfume and Disinfectant. Information on the quantity of each raw material held in stock per month, probably due to space or financial constraint, was obtained. Also, information on the quantity mix of these basic five raw materials and their costs for effective manufacturing of the soap product was equally available and obtained from the company’s records. Finally, data were collected on the quoted selling prices of the four sales packages of soap adopted by the company. However, information regarding labour cost, sales and marketing expenses and other related overheads were not obtainable, and as such, their effects were ignored in the analysis. Therefore, the only cost element considered for soap manufacturing in this paper is the cost of raw materials.  In a nutshell, the main focus of this work is to determine the quantity of each of the four sales packages that will maximize the profit of the company given the aforementioned raw materials constraints.    The analysis was carried out using linear programming techniques. The linear programming problem developed here is a mathematical program in which the objective function is linear in the unknown variables and the constraints have linear equation or linear inequality or both. The general form of a linear programming problem is stated in matrix form as shown below: Objective function: Maximize Z = CX                                                            (1) Linear Constraints: Subject to AX = b                                                            (2) Non-negativity condition:          X ≥ 0                                                        (3) The C in (1) is a row vector of m-dimension representing the objective function coefficients, X is a m  1 column vector of the decision variables of the LP model, A is an m  k matrix of coefficients, and b is an k 1 column vector of values in the right hand side of the constraint equations in (2).  Based on the data analysed in this work, the number of decision variables is four setting m = 4 in (1). The four decision variables X1, X2, X3 and X4 in vector X in the objective function represent the four types of sales packages of soaps adopted by the company with X1 represents sales in 1 tablet (unit sales), X2 represents sales in 3 tablets per pack, X3 represents sales in dozen (12 tablets per pack) while X4 represents sales of soaps in carton (120 tablets per pack). Also, since the company uses five different raw materials for the manufacturing of her medicated soaps, therefore, there are five linear constraints for the LP model, setting k = 5 in (2). The whole analysis was performed using R statistical package (www.cran.org). A self contributed library package in R, the ‘lpSolve’ that implements the LP was adapted in this study. 3. Data Analysis The data collected from KASMO Industry Limited (KIL) Osogbo, Nigeria on her main product line – medicated soap were analysed to determine the best sales package that would yield maximum profit to the company. Table 1 in Appendix A presents the five raw materials used for the production of soaps at KIL, Osogbo. The maximum quantity of each raw material held in stock for monthly production is also reported in the table.  The combinations of the quantities of these five basic raw materials (raw material mix) for soap production per European Journal of Business and Management                                        www.iiste.org ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online) Vol 4, No.17, 2012  128  boiling (in litres) are presented in Table 2 in Appendix A. This information is used to determine the production cost (in terms of raw materials) per tablet of medicated soap produced by the company. Not only that, the company’s quoted selling price per package of soap as indexed by the four decision variables X1, X2, X3 and X4 are presented in Table 3 in Appendix A. This information was later used to determine the marginal profit derived from each sale’s package by the company as presented in Table 4 in Appendix A. All the information provided in Tables 1 through 4 was used to form the linear programming model of the maximization type for the data as stated below. Maximize the objective function (profits):                   Z = 14.36X1 + 33.08X2 + 112.32X3 + 1023.20X4 Subject to (raw materials constraints): Caustic Soda:           0.88995X1 + 2.66984X2 + 10.67937X3 + 106.793650X4  ≤ 16820 Palm Kernel Oil:        2.14815X1 + 6.44444X2 + 25.77778X3 + 257.77778X4  ≤ 40600 Colourant:             0.00153X1 + 0.00460X2 + 0.01841X3 + 0.18413X4  ≤ 29 Perfume:               0.00614X1 + 0.01841X2 + 0.07365X3 + 0.73651X4 ≤ 116 Disinfectant:            0.02762X1 + 0.08286X2 + 0.33143X3 + 3.31429X4 ≤ 522                X1, X2, X3, X4  ≥ 0 In order to represent the above LP model in canonical form, five slack variables Xi (i = 5, 6, 7, 8, 9) were introduced into the model. This changed the inequalities signs in the constraint aspect of the model to equality signs. A slack variable will account for the unused quantity of raw material (if any) it represents at end of the production. As a result, the above LP model becomes that of Maximize               Z = 14.36X1 + 33.08X2 + 112.32X3 + 1023.20X4 Subject to (raw materials constraints): Caustic Soda:      0.88995X1 + 2.66984X2 + 10.67937X3 + 106.793650X4 + X5 = 16820 Palm Kernel Oil:  2.14815X1 + 6.44444X2 + 25.77778X3 + 257.77778X4 + X6 = 40600 Colourant:      0.00153X1 + 0.00460X2 + 0.01841X3 + 0.18413X4 + X7 = 29 Perfume:           0.00614X1 + 0.01841X2 + 0.07365X3 + 0.73651X4 + X8 = 116 Disinfectant:      0.02762X1 + 0.08286X2 + 0.33143X3 + 3.31429X4 + X9 = 522 with non-negativity constraint that X1,  X2,  X3,  X4,X5, X6, X7, X8, X9  ≥  0. For analysis proper, the Simplex method proposed by George B. Dantzig in 1947 as published in Dantzig(1963) was adopted to solve the above LP problem. The Simplex method has been found to be more efficient and convenient for computer software implementation in many instances (Yahya, 2004). The initial tableau of the above LP model as used by Simplex algorithm is given by Table 5 in Appendix A.  The R statistical package was employed to fit the LP model using the ‘lpSolve’ library. The R codes used to fit the model are given in Appendix B. The results obtained from this analysis are presented in the next section. 4. Results Results from the analysis carried out on the LP model in the previous section using Simplex method estimated the value of the objective function to be 271,296.4. The contributions of the four decision variables X1, X2, X3 and X4 into the objective function are 18893, 0, 0 and 0 respectively. This simply shows that only X1 variable contributed meaningfully to improve the value of the objective function of the LP model. It is observed from the result’s output in the appendix that the optimal solution to the linear programming model fitted here was attained at the first iteration. This simply shows the goodness of the structure of the data collected for analysis. 5. Discussions and Conclusion The appropriateness of the linear programming methods for optimal resource allocation in industry has been European Journal of Business and Management                                        www.iiste.org ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online) Vol 4, No.17, 2012  129  demonstrated in this work. This is evident from the results obtained from the profit maximization type of the LP model fitted to the data collected on soap manufacturing from KASMO Industry Limited Osogbo, Nigeria.  From the results of the LP model in Section 3 as reported in Section 4, it is desirable for the KIL company to concentrate on the unit sales (1 soap tablet per pack) of her soap products. By this, total sales of about 18,893 tablets would be sold by the company per month. This would fetch the company an optimal profit of about N271,296.4 per month based on the costs of raw materials only. A simple division of the value of the objective function, N271,296.4 by 18,893 soap tablets sold based on 1 tablet per pack strategy (as shown in Table 3) yields a profit of N14.36 per soap tablet. This value agreed perfectly with the profit expected by the company on the sales of a soap tablet as contained in Table 4.   The results of the LP model fitted to the data collected from KIL are only based on the cost of raw materials used for soap production. Therefore, it is quite instructive to remark that if information on other elements of cost of production such as labour and overhead costs is available and incorporated into the LP model formulation and analysis, the results reported here might be remarkably different. Nonetheless, findings from this work could still serve as useful guides to the management of KIL in the formulation of production and marketing strategies for their soap product. References Akingbade, F. (1996); Basic Operational Research Techniques, Panaf Inc. Lagos, Nigeria. Dantzig, G. B. (1963); Linear Programming and Extensions, Princeton University Press, New York. Hamdy, A. T. (2007); Operations Research: An Introduction, 8th edition, Pearson Education Inc. USA Hillier, F. S. and Lieberman, G. J. (2001); Introduction to Operations Research, 7th edition, McGrwa-Hill Higher Education, New York. Lucey, T. (1996); Quantitative Techniques, DP Publications, London. R Development Core Team, R: A language and environment for statistical computing. R foundation for Statistical computing, Vienna, Austria, (2007), ISBN 3-900051-07-0, URL http://www.R-project.org. Yahya, W. B. (2004); Determination of Optimum Product Mix at Minimum Raw Material Cost, Using Linear programming. Nigerian Journal of Pure and Applied Sciences, Vol.19:1712-1721. Appendix A Table 1: Types and quantity of raw materials used for the production of medicated soaps tablets per month Raw Materials Quantity held for production  per month (in kg) Caustic Soda 16,820 Palm Kernel Oil 40,600 Colourant 29 Perfume 116 Disinfectant 522  Table 2: Quantities of the five raw materials (raw material mix) used for soap production per boiling Raw Materials Quantity used (raw material mix) per boiling (in liters) Caustic Soda 290 Palm Kernel Oil (PKO) 700 Colourant 0.5 Perfume 2 Disinfectant 9 European Journal of Business and Management                                        www.iiste.org ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online) Vol 4, No.17, 2012  130  Table 3:   The selling price per pack of soap tablet(s) and the unit selling price in each pack of soaps Soap Package Selling Price per pack (N) Unit selling price per soap tablet (N) X1 (1 tablet per pack) 30.00 30.00 X2 (3 tablets per pack) 80.00 26.67 X3 (12 tablets per pack) 300.00 25.00 X4 (24 tablets per pack) 2900.00 24.17  Table 4:   The production cost, selling price and profit earned per pack of soap tablets Soap Package Production Cost per pack of soap (N) Selling Price per pack (N) Profit (N) X1 15.64 30.00 14.36 X2 46.92 80.00 33.08 X3 187.68 300.00 112.32 X4 1876.80 2900.00 1023.20  Table 5:    Initial tableau of the linear programming model for soap data  Slack Variable  X1  X2  X3  X4  X5  X6  X7  X8  X9  Quantity  X5  X6  X7  X8  X9  0.88995  2.14815  0.00153  0.00614  0.02762  2.66984  6.44444  0.00460  0.01841  0.08286  10.79365  25.77778  0.01841  0.07365  0.33143  106.79365  257.77778  0.18413  0.73651  3.31429  1  0  0  0  0  0  1  0  0  0  0  0  1  0  0  0  0  0  1  0  0  0  0  0  1  16820  40600  29  116  522  Z -14.36 -33.08 -112.32 -1023.20 0 0 0 0 0 0  European Journal of Business and Management                                        www.iiste.org ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online) Vol 4, No.17, 2012  131  Appendix B R codes employed to fit the linear programming model for soap data. ## Linear Programming Implementation in R for soap data ## ########################################################################  ## Load the required library ## library(lpSolve)   KASMO <- lp(objective.in = c(14.36, 33.08, 112.32, 1023.20),             const.mat = matrix(c(0.88995, 2.66984, 10.67937,              106.79365, 2.14815, 6.44444, 25.77778, 257.77778,              0.00153, 0.00460, 0.01841, 0.18413, 0.00614, 0.01841,             0.07365, 0.73651, 0.02762, 0.08286,0.33143, 3.31429),             nrow= 5, byrow = T), const.rhs = c(16820, 40600,             29, 116, 522), const.dir = rep("<=", 5), direction =              "max") KASMO   ## Print the quantity of each of the decision variables that   ## ## contributed to the value of the objective function (profit) ##                             KASMO$solution   [1] 18892.51     0.00     0.00     0.00  ## Print the value of the objective function ## KASMO$objval  [1] 271296.4  ## Determine the profit per soap tablet ## KASMO$objval/KASMO$solution  [1] 14.36   Inf   Inf   Inf ########################################################################    

Profit Maximization In A Product Mix Company Using Linear Programming

https://www.iiste.org/Journals/index.php/EJBM/article/download/3208/3258

Profit Maximization In A Product Mix Company Using Linear Programming

Abstract

Similar works

Full text

Available Versions

International Institute for Science, Technology and Education (IISTE): E-Journals