Sosnowski, Marek

English

Digital Commons @ New Jersey Institute of Technology (NJIT)

New Jersey Institute of TechnologyDigital Commons @ NJITElectrical and Computer Engineering Syllabi NJIT SyllabiFall 2018ECE 291 - Electrical Engineering Laboratory IMarek SosnowskiFollow this and additional works at: https://digitalcommons.njit.edu/ece-syllabiThis Syllabus is brought to you for free and open access by the NJIT Syllabi at Digital Commons @ NJIT. It has been accepted for inclusion in Electricaland Computer Engineering Syllabi by an authorized administrator of Digital Commons @ NJIT. For more information, please contactdigitalcommons@njit.edu.Recommended CitationSosnowski, Marek, "ECE 291 - Electrical Engineering Laboratory I" (2018). Electrical and Computer Engineering Syllabi. 10.https://digitalcommons.njit.edu/ece-syllabi/10ECE 291 ABET Course Syllabus  1. Course number and name  ECE 291 Electrical Engineering Laboratory I  2. Credits and contact hours 1 credits, 3 contact hours  3. Course coordinator’s name  Marek Sosnowski  4. Text book, title, author and year  Laboratory Manual for ECE 291 (on ECE laboratory website) 4a. other supplemental materials  Nilsson, J.W. and Riedel, S.A., Electric Circuits, 9th Edition, Pearson Prentice Hall, Upper Saddle River, NJ, 2011  5. Specific course information  5a. brief description of the content of the course  Laboratory work in the areas covered in ECE 231, ECE 232. Emphasizes the construction, testing and analysis of analog circuits. Emphasizes basic measurement techniques and instrumentation. Use of Multisim/PSpice for solving dc, ac and transient problems on the personal computer. 5b. prerequisites ECE 231, HSS 101,  co-requisites: ECE 232 5c. Course required in EE and COE programs  6. Specific goals for the course  6a. specific outcomes of instruction  Students will be able to:  (1) Use basic electronic instruments (DC power supply, waveform generator, multimeter, and analog and digital oscilloscopes)  (2) Wire circuits on a protoboard and test their performance using instruments in (1). (3) Verify experimentally basic circuits laws (Ohm’s, Kirchhoff’s’) and explain differences between theoretical and measured values. (4) Measure amplitude and phase of sinusoidal signals on components of RC and RLC circuits. (5) Measure parameters of passive resonance circuits and filters. (6) Measure characteristics of semiconductor diodes, including Zener diode with forward and reverse bias. (7) Demonstrate DC and switching operation of bipolar and MOS transistors. (8) Wire and test inverting and noninverting operational amplifiers.    6b. ABET Criterion 3 student outcomes addressed by the course  (b) an ability to design and conduct experiments, as well as to analyze and interpret data  (g) an ability to communicate effectively  (k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.   7. Topics to be covered   The course follows Laboratory Manual, which describes the following experiments:   1. Experiments I  Basic Electronic Instruments; The Oscilloscope  2. Experiments II   Basic circuit laws; dc 3. Experiments III  Internal impedance of instruments;  influence of instruments on circuits 4. Experiments IV Digital oscilloscope; oscilloscope input impedance and the scope probe 5. Experiments V AC measurements; amplitude and phase 6. Experiments VI  Resonance circuits 7. Experiments VII  RC circuits.  Passive filters. 8. Experiments VIII  The diode and diode circuits 9. Experiments IX  The bipolar transistor; DC Operation and Switching. 10. Experiments X  Transistor; Emitter Follower. 11. Experiments XI Operational amplifiers.     ECE 291 COURSE POLICY   Instructor: Hieu Pham Trung Nguyen, hieu.p.nguyen@njit.edu  Office hours:  Monday :3:00PM ˗ 4:00PM, Room ECEC 309 Thursday :3:00PM ˗ 4:00PM, Room ECEC 309 and by appointment  Class meetings:  Thursday :8:30AM – 11:25AM, Room FMH 204  Text:   Manual for electrical engineering laboratory 1- ECE  291 by M. Sosnowski available on the ECE Department Laboratory web page ( http://coefs2.njit.edu)  Students in the laboratory work in teams of with maximum three students.   Attendance  A laboratory is a practical experience requiring proper equipment and involving teamwork. Therefore, attendance at all laboratory sessions is required.  Students who miss a laboratory session must make up for it at the first opportunity and arrange it with the instructor.  It is easiest to arrange a make-up session during regular meetings of other laboratory sections.  A student absent at a regular lab session has to make his or her measurements and not use the data obtained by the group partner.  Laboratory Notebook Students are required to have a Laboratory Notebook which should have current record of laboratory procedures, schematics and data. Prior to every lab session you should enter in the notebook a brief plan of experimental tasks, including schematic and other relevant information. Each entry in the notebook must be dated. The Laboratory Notebook provides documentation of your experimental work and will be reviewed by the instructor and used for evaluating your performance. Show your notebook to the instructor at the end of every lab session before leaving.    Deliverables Pre-laboratory assignments precede each set of experiments, which prepares you for work in the laboratory.  Prelabs are completed at home by each student individually and are to be handed to the instructor prior to doing the experimental work. Besides entry of the experimental plan in the notebook the prelabs usually consist of simulations and schematics of the experimental design.    Laboratory Reports are prepared by each group of students, who have worked together on experiments, after all measurements and analysis are completed.    Professional style reports are expected at this upper level laboratory. Reports should be typed and have the standard properly filled cover page.  All pages must be numbered and all figures and graphs must have captions and numbers. The axes of the graphs must be labeled and the units indicated. Schematics of all circuits should be included and the conditions under which data were obtained (such as input voltage, frequency etc.) must be clearly indicated.   Divide report in numbered sections starting with Introduction, which states briefly the objectives of the experiment. Follow with Experimental Procedures, describing the experimental setup. Next is Experimental Data, followed by Discussion, which includes data analysis, derivation of parameters and comparison with simulations. You may include a separate Simulations section if it is justified by its size. Finally, a very important section Conclusions, in which you should briefly comment on the results and their agreement (or not) with your expectations or modeling.    Simulation software: PSPICE or MULTISIM (preferred), graphing: MS EXCEL, MATLAB or other.    GRADING POLICY:  The course grade is based on the average grade of all experiments. Each experiment grade consist of the following elements:  1. Preparation for the experiments including Quiz or Prelab assignment 15 %  2. Laboratory Report: a) Quality of  presentation and format 15 % b) Experimental data 40 % c) Analysis simulations and discussion 30 %  The grade of an individual student may be lower than for the rest of the team based on poor attendance or participation in the laboratory.     NJIT Honor Code will be upheld, and any violations will be brought to the immediate attention of the Dean of Students.  

ECE 291 - Electrical Engineering Laboratory I

https://digitalcommons.njit.edu/cgi/viewcontent.cgi?article=1010&amp;context=ece-syllabi

ECE 291 - Electrical Engineering Laboratory I

Abstract

Similar works

Full text

Available Versions

Digital Commons @ New Jersey Institute of Technology (NJIT)