Field tests were conducted to evaluate and compare the tractive performance of a tractor when operated in the two and four-wheel drive mode. Traction data were obtained form drawbar tests on five different soil surfaces. Tractive performance evaluation were made by comparing the relationships of slip, dynamic traction ratio and tractive efficiency. Results showed the more the soil is disturbed the lowest are the tractive performance. Also, the highest performance was obtained when the tractor was operated in the four-wheel drive mode.Des essais ont été menés pour évaluer et comparer les performances d'un tracteur en mode opératoire 2 et 4 roues motrices. Les données expérimentales ont été obtenues à partir d'essais de traction sur cinq types de surface. Les performances obtenues ont été comparées en se basant sur les relations caractérisées par le glissement, le coefficient dynamique à la traction et l'efficience à la traction. les résultats ont montré que plus le sol est labouré, plus les performances en traction du tracteur sont réduites. De même, de meilleures performances sont obtenues quand le tracteur est utilisé en mode opératoire 4RM par comparaison au 2RM

Bashford, L. L.

Jenane, C.

Revue Marocaine des Sciences Agronomiques et Vétérinaires

Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1): 47 - 54 © Actes Éditions, Rabat Field tractive performance comparisons between a tractor operated in the 2WD and 4WD mode Chakib JENANEl~ & L.L. BASHFORD2 (Reçu le 05/04/1994; Accepté le 20/03 /1995) ';s'Y'-".:.J~ t!).u1 ~ ~JIr.- JL,..,)1 JJ}A..) ~_}ï L:J~I ..:J~I .uY'-" ..:J~ ë"!J~)1 ~ ~}r.- JL,..,)1 JJ}A.. J IL}-' y}~ ~11..iA J ~f.l JL,.,J'll L}A.~ ~, ~ .~.rll.:r tlfl ~ J.,J ~ ~)IJ.J-I ~~ Y~.:r 4-# ~ ~I ~~I J~I JL,.,)l 01 YJ~I ~ .y-:l:-I LW) ~ ~L::..ul J~W ,~.rU ~ clJ~) ~ ~I .~ d'y.:.J~ ~J~};-:l:-I ~ Li ~ ~ 4L;d101) d'J~I';;';~ ë~ Wy ~ . .J-I a1J - ~L::..ul J~WI - J1--;:l1 - JI)--I : ~l::.all .:.Jws:J1 Performance en traction d'un tracteur opérant en 2RM et 4RM Des essais ont été menés pour évaluer et comparer les performances d'un tracteur en mode opératoire 2 et 4 roues motrices. Les données expérimentales ont été obtenues à partir d'essais de traction sur cinq types de surface. Les performances obtenues ont été comparées en se basant sur les relations caractérisées par le glissement, le coefficient dynamique à la traction et l'efficience à la traction. les résultats ont montré que plus le sol est labouré, plus les performances en traction du tracteur sont réduites. De même, de meilleures performances sont obtenues quand le tracteur est utilisé en mode opératoire 4RM par comparaison au 2RM. Mots clés: Tracteur - Traction - Efficience du tracteur - Glissement Field tractive performance comparisons between a tractor operated in the 2WD and 4WD mode ----, Field tests were conducted to evaluate and compare the tractive performance of a tractor when operated in the two-and four-wheel drive mode. Traction data were obtained form drawbar tests on five different soil surfaces. Tractive performance evaluation were made by comparing the relationships of slip, dynamic traction ratio and tractive efficiency. Results showed the more the soil is disturbed the lowest are the tractive performance. Also, the highest performance was obtained when the tractor was operated in the four-wheel drive mode. Key words: Tractor - Traction - Tractor efficiency - Slip 1 Département de Machinisme Agricole, Institut Agronomique et Vétérinaire Hassan II, B.P. 6202-Instituts, 10 101 Rabat, Maroc 2 University of Nebraska-Lincoln, Biological Systems Engineering Department, USA. <>- Corresponding author 48 Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1) INTRODUCTION As energy co st increases, its efficient use in agri-cultural production systems has become a major concern to engineers, farmers and others concerned with agricultural production. Increasing the trac-tive performance of farm tractors can lead to in-creased tractor productivity and fuel savings. Tractive performance of agricultural tractors has been the foeus of much research. Osborne (1971) and Dwyer & Pearson (1976) reported that in-creasing the number of drive wheels by using front-wheel-assist (FWA) or four-wheel-drive (4WD) tractors can improve traction in soft soil. Ali & Mckeyes (1978) investigated different tire treads. They observed very little improvement in traction with changes in the tire tread. Bashford et al., (1987) compared dual tires to singles for a MFWD tractor. No discemible difference in trac-tive performance was observed on tilled soil with duals on the rear axle of the tractor. Dwyer (1984), Plackett (1985) and Upadhyaya & Wulfsohn (1990) summarized different studies aimed at traction prediction and improvement. Most of this research, carried out in Europe and North America, was directed towards agricultural vehicle performance on relatively firm surfaces. The present study, conducted in Morocco, reports field trials data comparing the tractive perfor-mance of a tractor when operated in the 2WD and 4WD modes on different soil surfaces. Obviously, for a given MFWD tractor, the operator has a choice of operating in the 2WD or 4WD mode. The objectives ofthis research were: (i) to compare the tractive performance of an agricultural tractor when operated in the 2WD and 4WD modes and (ii) to develop equations to describe the tractive per-formance of the tractor test on different tractive surfaces. MATERIEL AND METHODS 1. Procedure A Massey-Ferguson 3080 tractor was instru-mented so that drawbar pull, travel speed, engine rpm and transmission output torque could be measured in the field. These variables were me a-sured using respectively a 50 kN load ceIl, a radar velocity sens or, a magnetic pickup and a wire-Iess inductive torque meter. A 21-XL campbell Scien-Jenane & Bashford : Tractive performance of a tractor tific data logger was used to power the sensors and to record their output signaIs. Specific details ofthe instrumentation system are given by Jenane et al. (1991) and Jenane & Bashford (1991). The test tractor was equipped with standard pneumatic radial tires. The size of front tires was 14.9-28 and the size ofrear tires was 18.4-38. Both sets of tires had R-1 tread. Care was taken to maintain inflation pressures constant during the tests. The static weight distribution was 40 % front and 60 % rear, for a total verticalload of 43.36 kN. The same ballast was used for the 2WD and the 4WDmode. Field tests were conducted in a cohesive-frictional partially saturated clay soil. Initial soil moisture content and bulk density were respectively 13.4 % and 1. 7 gm/cm3 for the 0-30 cm soil depth layer. The original tractive surface was a barley-stubble field. From this original surface, four more tractive sur-faces were prepared including a moldboard plowed, disk plowed, chisel plowed, and offset disked sur-face. A 100 m distance was laid off on each tractive surface and flags placed to mark the beginning and end of each test run. Tractive performance was evaluated over a wide range of slip on the five soil surfaces. The test tractor (MF 3080) was loaded with a load tractor. Illustrated in Figure 1 is the test ractor puIling another tractor which was used to provide the varying drawbar loads. During the test runs, the load tractor was driven at lower speeds than the test tractor. Thus, different drawbar loads were applied on the test tractor and wheel slip varied from minimum to excessive (0-60% slip). On each tractive surface, the test tractor was oper-ated in the 2WD and the 4WD mode. In each mode, the tractor operator used two different gears (4th and 6th) and ran the engine at full throttle. The differential lock was kept engaged at aIl times to insure equal travel reduction at each drive wheel. Data were sampled at a rate of 50 Hz and averaged over half second intervals, resulting on 120 to 180 data sets for each performance parameter de-pen ding on the gear used and the time needed to complete a run. About 300 to 450 data points were obtained for each tractor driving mode and soif surface. Jenane & Bashford : Tractive performance of a tractor Figure 1. The test tractor pulling the load tractor 2. Equation for calculating tractive perfor-mance variables The slip (s1) was expressed as: sI = lOOx(l- ~~) [1] where: VI = actual speed measured by the radar, V 2 = theoritical speed determined on a hard surface at zero drawbar load From the tractor geometry and drawbar pull field data, the tractor wheel dynamic loads were calcu-lated as (Figure 2): P ~!L-H-~~_-Wr Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1) 1 Wf = -x(bxWt - cxp) a 1 Wf = Wf +-x(cxp- bxWt ) a Where: Wt = total weight on the tractor Wr = dynamic load on the rear axle Wf = dynamic load on the front axle a = wheel base, 2700 mm 49 [2] [3] b = distance from rear axle to center of gravit y, 1050 mm c = drawbar height, 980 mm P = drawbar pull Figure 2. Free body diagram of a tractor and applied forces 50 Actes Inst. Agron. Vet. (Maroc) 1995, VoL 15 (1) The dynamic traction ratio (DTR) was defined as the ratio of the drawbar pull to the dynamic load on the traction devices of the vehicle, which may be written for the 2WD mode as: DTR=~ [4] Wr P and for the 4WD mode: DTR = - [5] Wt Tractive efficiency (TE) is the drawbar power as a percentage of the power available at the driving axles, which may be expressed as: TE = Drawbar Power = P x VI [6] Axle Power Ta x w a Where: Ta = axle torque wa = axle rotational speed P and VI are as before The equation above may be rewritten as: Jenane & Bashford : Tractive performance of a tractor Tot = transmission output torque w ot = transmission shaft output angular velocity. 11 = drive gear, differential and planetary transmis-sion efficiency ('" 98.6 %) Based on Wismer & Luth (1973) empirical equa-tions for traction, the dynamic traction ratio and the tractive efficiency were respectively predicted from the following expressions (Bashford et al., 1987): ~xAx(l_eExsl)+C W D TE==(1-s1)x(1- E 1) 1-e XS [8] [9] where, A, B, C, D and E are soil and tire related constants. RESULTS AND DISCUSSION A least-squares curve fitting technique (Gauss-Newton method) for estimating non-linear param-eters was used to determine the constant terms of TE = __ P_x_v-=-l_ Tot x 11 x mot where: [7] equations [8] and [9]. Coefficient estimates 95% confidence intervals and coefficient of correlation (r2) for the non-linear regression are given in Tables 1 and 2. Table 1. Dynamic traction ratio coefficients and 95% confidence intervals for the five tractive surfaces -Equation [8] Tractive surface Tractor mode A B C r 2 Estimate (conf. int.) Estimate (conf. int.) Estimate (conf. int.) Stubble 2WD 1.006 -4.870 -0.167 (0.945,1.067) (-5.978,-3.762) (-0.232,-0.103) 0.92 4WD 1.029 -6.179 -0.198 (0.982,1.076) (-7.299,-5.060) (-0.263,-0.134) 0.90 Moldboard plowed 2WD 0.685 -2.979 -0.055 (0.627,0.744) (-3.973,-1.985) (-0.110,-0.001) 0.88 4WD 0.845 -7.547 -0.265 (0.789,0.901) ( -8.591,-6.503) (-0.335,-0.195) 0.94 Disk plowed 2WD 0.714 -3.639 -0.095 (0.671,0.756) ( -4.643,-2.635) (-0.158,-0.032) 0.88 4WD 0.736 -5.006 -0.121 (0.701,0.772) (-5.951,-4.061) (-0.168,-0.074) 0.91 Chisel plowed 2WD 0.840 -4.487 -0.184 (0.799,0.881) (-5.268,-3.707) ( -0.248,-0.119) 0.93 4WD 0.969 -8.433 -0.351 (0.897,1.041) (-9.856,-7.011) ( -0.445,-0.257) 0.92 Offset disked 2WD 0.879 -3.627 -0.136 (0.835,0.923) (-4.382,-2.872) ( -0.189,-0.084) 0.93 4WD 0.994 -8.034 -0.377 (0.906,1.082) (-9.519,-6.549) (-0.492,-0.262) 0.90 Jenane & Bashford : Tractive performance of a tractor Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1) 51 Table 2. Tractive efficiency coefficients and 95% confidence intervals for the five tractive surfaces -Equation [9] Tractive surface Tractor mode D E r 2 Estimate (conf. int.) Estimate (conf. int.) Estimate (conf. int.) Stubble 2WD 0.028 (-0.017,0.074) 4WD -0.201 (-0.258,-0.142) Moldboard 2WD 0.282 plowed (0.228,0.306) 4WD 0.138 (0.122,0.155) Disk plowed 2WD 0.233 (0.206,0.259) 4WD 0.237 (0.217,0.256) Chisel plowed 2WD 0.156 (0.137,0.174) 4WD -0.044 (-0.098,0.011) Offset disked 2WD 0.215 (0.195,0.235) 4WD -0.065 ( -0.103,-0.027) The relationships between the dynamic traction ratio and slip as determined using equation [8] are illustrated in Figure 3. As expected, discernible differences were observed between the two driving modes. In aU test the highest dynamic traction ratio occurred when the tractor was operated in the 4WD mode. At 20% slip, the dynamic traction ratios observed for the 4WD mode ranged from 0.39 on a moldboard plowed field to 0.53 on a stubble field. Corresponding figures for the 2WD mode were between 0.25 to 0.46. Thus depending on the soil surface, the resulting increase in the dynamic trac-tion ratio varied between 13 to 36%. Also, the results indicate that the rate of increase of the dynamic traction ratio is highest in more disturbed soil surfaces (moldboard and disk plowed fields) as compared to hard soil surfaces (stubble field). Comparing the constant terms of equation [8] for the pull/weight ratio developed in 2WD and 4WD modes (Table 1), for the stubble, disk plowed, and offset disked fields, the constant A was within mutually 95% inclusive intervals. The coefficient C was within mutuaUy inclusive intervals for the stubble and disk plowed field. The coefficient B was in general within 95 % exclusive intervals. This result confirm the dynamic traction ratio differ-en ces observed between the 2WD and 4WD. Tractive efficiency data as determined from equa-tion [9] are illustrated in Figure 4. The results -1.578 (-4.276,1.119) 15.196 (12.670,17.723) -6.333 ( -7.272,-5.394) 0.52 -5.191 ( -6.023,-4.459) 0.80 -5.044 ( -5.926,-4.161) 0.55 -10.496 (-12.079,-8.914) 0.42 -3.759 (-4.363,-3.155) 0.78 1.335 (-0.222,2.890) 0.65 -6.339 (-7.263,-5.415) 0.53 1.785 (0.859,2.712) 0.75 indicate that the 4WD developed higher tractive efficiency at less slips than the 2WD on the five tractive surfaces. On tilled soils, and for a slip of 20%, the 2WD mode achieved tractive efficiencies ranging from 0.45 to 0.59. The 4WD mode aUowed for the same slip value, tractive efficiencies ranging from 0.60 to 0.70; an increase of 15 to 25%. The highest tractive performance were observed on the stubble surface (Figures 5 to 8). Also, the tractor performance was better in the chisel plowed and offset disked fields when compared to the mold-board and disk plowed fields. This may be related to the soil shear strength. The moldboard and disk plow inverted the soil, resulting in a more friable state and reducing to a greater extent its shearing strength. Thus, for a given tractor wheel slip, the increase in the dynamic traction ratio is lower in comparison to the chisel plowed or offset disked fields. Both 2WD and 4WD configurations resulted in similar tractive performance for the chisel plowed and offset disked surfaces. The less disturbance of soil by these implements accounted for the similar results. A higher performance was obtained in the moldboard plowed field when compared to the disk plowed field in the 4WD mode. Opposite results were obtained by using the 2WD mode. No apparent reason may be given for this result. 52 Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1) Q 0 ~ 1.0 i 1.0 _ms',-,--, "'-:"---.11 0.8 ... ~ o .• - 1 s .. 4IIID i '.' ~ o .• ~---- 0.2 .,. J G.2 .,- ~ '" 0.00 20 40 110 ~ 0.00 • 40 • SLIP. % 0 SLIP,1/, Q 1.0 Q 1.0 ~ ~~NUI i ___ NUI ~ 0.8 1 o .• 0.1 ~ ... ~ o .• o .• ~ . .,-r r / 1 O.J Q 0.2 V 0.0 0 , i 0.0 0 20 40 110 20 40 no 0 SLIP, % 0 SlIP, % Q 1.0 ~ O •• ~ o .• ~ o .• 1 0.2 UA 20 40 no SLIP,% Figure 3. Slip versus dynamic traction ratio comparison for the 2WD and 4WD , ;:It 0.6 w ~ o .• ... 0.2 Jenane & Bashford : Tractive performance of a tractor -""--. DIaK PlOW&O FIELD i 1.0 ~ o .• lO.8~ . ! ::d/_/---';-;--~~--~ ~ 0 20 ., 80 IUI'.% O .• ,1.0 ~··or---!M~--:---~ ~ 20., 10 o .• ~ J/ - - - ---:::-1 ... · ::or----.;;---~----~ SlIP, '" ~ 1.°r---::::-:: __ --~ rto .• ~I~:.': 1 -~-G.2 : ···~or-....... _;_-_':::-""-_d JO 40 IICI SlIP.'" 20 40 no "II', " Figure 4, Slip versus tractive efficiency comparison for the 2WD and 4WD modes Jenane & Bashford : Tractive performance of a tractor Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1) Figure 5. Slip versus dynamic traction ratio on five tractive surfaces in two-wheel drive mode Figure 6. Slip versus dynamic traction ratio on five tractive surfaces in four-wheel drive mode Figure 7. Slip versus tractive efficiency on five tractive surfaces in two-wheel drive mode 0,1 ~~~'-' Stubbie 0 0,8 O_D!!.k!,.<! ;::: C Plowed ;2 z J2 PI~e~ Q 0,6 >- M Plowed U ~ >-U 0,4 :g ..: z ;>-Cl 0,2 o,o4o---"9'"---2 .. o-------4~0---.... --~·60 SUP % 0,1'..-__________________ , 0 0,8 ~ z Q 0,6 >-~ >-~ 0,4 ::;: ..: z ;>-Cl 0,2 ~bbie-1 O_D!!.k!,.<! C Plowed M Plowed 0,0 ~------....------...,..---.----~.60 o 20 40 0,1' >-U 0,8 Z I.U U t::: 0,6 u.. I.U I.U ï=: 0,4 l-U ~ 1- 0,2 0,0 SUP% 0 20 SUP % 40 ()_D)!k.e.<l C Plowed 1> Plowe~ M Plowed --.-- .. 53 60 54 Actes Inst. Agron. Veto (Maroc) 1995, Vol. 15 (1) Jenane & Bashford : Tractive performance of a tractor 0,1'..--------------------, G 0,8 Z ..... U ~ 0,6 ..... ..... .J~::::.:::::.---". . __ .. _. __ :::.,t:-........ , ....... -..... ..... • ...... ::.:.· ..... to~-....: (~D!!.ke!! C Plowcd QPI~e~ M Plowed LoU 2= ° 4 ··'·.,.:.:'··'1 ....... ~ __ --..J 1-' U ~ 1- 0,2 Figure 8. Slip versus tractive efficiency on five tractive surfaces in four-wheel drive mode 0,0 "---~---20------4,..O------::ITiO suP % CONCLUSIONS The 4WD mode provided higher tractive perfor-mance than the 2WD mode on aIl the tractive surfaces tested. Depending on the soil surface, an increase of 15 to 25% of tractive efficiency was observed by using the 4WD mode. When comparing the dynamic traction ratio at maximum tractive efficiency, the 4WD has a higher performance than the 2WD. With respect to this performance, it may be concluded that a 4WD will provide a higher draft and a faster speed in comparison to the 2WD. Therefore, it is likely taht the work rate will be increased. Also, it may be concluded that when operating a MFWD tractor, the tractor should be used with the front-wheel drive engaged while working in the field on any type surface. However during transport on hard surface roads, the front-wheel drive should be disengaged. Obviuously the tractor cannot be optimally ballast for both 2WD and 4WD operating modes without changing the relative location of the ballast. The equations developed resulted in a good fit to the measured data. The dynamic traction ratio and tractive efficiency were predicted with reasonable accuracy as demonstrated by their respective co-efficient of correlation ACKNOWLEDGEMENT The authors acknowledge the support for this research from GTZ Project No. 77.2275.4. REFERENCES CITED Osborne L.E. (1971) A field comparison of the perfor-mance oftwo- and four-wheel drive and tracklaying tractors. Journal of Agricultural Engineering Re-search 16(1):46-61 Dwyer M.J. & Pearson G. (1976) A field comparison ofthe tractive performance of two- and four-wheel drive tractors. Journal of Agricultural Engineering Research 21:77-85 Ali O.S. & Mckeyes E. (1978) Traction improvement in lugged tires for farm vehicles. ASAE Paper, No. 78-1038 Bashford L.L., Bargen KV., Way T.R. & L. Xiaoxian (1987) Performance comparisons between duals and singles on the rear axle ofa frontwheel assist tractor. Transactions of ASAE , Vol. 30(3):641-645 Dwyer M.J. (1984) The tractive performance ofwheeled vehicles. Journal of Terramechanics, Vol 21(1):19-34 Plackett C.W. (1985) A review offorce prediction. Jour-nal of Agricultural Engineering Research,Vol. 31:1-29 Upadhyaya S.K & Wulfsoln D. (1990) Review oftraction prediction equations. ASAE Paper , No. 90-1573 Jenane C., Bashford L.L. & Knetchge H. (1991) A mea-suring instrumentation system for tillage energy re-~earch in Morocco. Actes Inst. Agron. Veto (Maroc), Vol. 11 Jenane C. & Bashford L.L. (1991) Field evaluation of tractive efficiency using a wire-Iess torque meter. Journal Applied Engineering in Agriculture, Vol. 8(2):141-145 Wismer R.D. & Luth H.J. (1973) Off-road traction prediCl-tion for wheeled vehicles. Transactions of the ASAE, Vo1.17:8-10,14 

Performance en traction d'un tracteur opérant en 2RM et 4RM

https://www.agrimaroc.org/index.php/Actes_IAVH2/article/download/220/199

Performance en traction d'un tracteur opérant en 2RM et 4RM

Abstract

Similar works

Full text

Available Versions

Revue Marocaine des Sciences Agronomiques et Vétérinaires