Co-60 is an important radionuclide in spent nuclear fuel and liquid radioactive wastes. For the purification of water containing Co2+, ions sorption on hydroxyapatite (Ca-10(PO4)(6)(OH)(2)) can be applied. The process is particularly cost-effective if biological apatite from animal bones is utilized. In this study, dependence between bovine bone treatment conditions and Co2+, sorption was investigated as a function of initial metal concentration. Eight sorbents were previously prepared using fractional factorial design, by simultaneous variations of five process variables between two levels: factor A-the type of the chemical reagent (H2O2 or NaOH), factor B-reagent concentration (0.1 mol/L or 2 mol/L), factor C-reaction temperature (20(o)C or 60(o)C), factor D-contact time (1h or 3h) and factor E-sample annealing (without or at 400(o)C). At this point, the effects of treatment factors on Co2+, sorption efficiency were evaluated using statistical analysis. Amounts of Co2+ sorbed, amounts of released Ca2+ ions and final pH values were considered as system responses. The results showed that the impact of various treatment factors was different for different starting concentrations of Co2+. Consequently, no statistically important relations could be established between treatment conditions and Co2+, sorption from 10(-4) and 5*10(-4) mol/L solutions, whereas thermal treatment at 400(o)C was the only statistically significant factor influencing sorption from the most concentrated solution (5*10(-3) mol/L). Depending on initial Co2+, concentration, various factors had statistically significant effect on equilibrium pH values, whereas no relation was found between bone treatment conditions and the amounts of Ca2+, released during the sorption.3rd International Conference on Radiation and Applications in Various Fields of Research (RAD), Jun 08-12, 2015, Budva, Montenegr
