The structure of laminar inverse diffusion flames (IDFs) of methane and ethylene was studied using a cylindrical co-flowing burner. Several flames of the same fuel flow-rate yet various air flow-rates were examined. Heights of visible flames were obtained using measurements of hydroxyl (OH) laser-induced fluorescence (LIF) and visible images. Polycyclic aromatic hydrocarbon (PAH) LIF and soot laser-induced incandescence (LII) were also measured. In visible images, radiating soot masks the blue region typically associated with the flame height in normal diffusion flames (NDFs). Increased air flow-rates resulted in longer flames. PAH LIF and soot LII indicated that PAH and soot are present on the fuel side of the flame and that soot is located closer to the reaction zone than PAH. Ethylene flames produced significantly higher PAH LIF and soot LII signals than methane flames, which is consistent with the sooting propensity o