Mestrado em Engenharia MecânicaNesta dissertação desenvolveu-se e testou-se um protótipo funcional de um
queimador de pellets para aquecimento de água, passível de ser acoplado em
caldeiras a gasóleo com potência nominal entre 15 e 30kW.
Numa primeira fase abordou-se o estado da arte no que concerne as caldeiras
a gasóleo e a pellets para aquecimento de água, seguiu-se a concepção e
dimensionamento do projecto mecânico e eléctrico do sistema de queima de
pellets que, em última fase, foi sujeito a testes para a análise e avaliação do
seu desempenho energético e ambiental do mesmo.
ABSTRACT: In this dissertation it was developped and tested a functional prototype of a
pellets’ burner for water heating to be connected in diesel boilers with nominal
power between 15 and 30kW.
In the first phase of this work it was studied the state of the art focusing the
design, the operating mode and efficiency of the diesel and pellets boilers.
Then the next step was conception followed by the development of the
mechanical and electrical project to produce the device where the pellets shall
be burned. Finally, trial tests were carried out with the prototype to verify the
energy and ambient performance