Weatherbee, Stephanie

English

UNH Scholars' Repository

University of New HampshireUniversity of New Hampshire Scholars' RepositoryDivision 09 – Finishes Chapter 5 – Technical Construction andRenovation Standards1-25-2013092900 - Gypsum BoardSandra Hickeysandra.hickey@unh.eduFollow this and additional works at: https://scholars.unh.edu/pdch_5_09This Article is brought to you for free and open access by the Chapter 5 – Technical Construction and Renovation Standards at University of NewHampshire Scholars' Repository. It has been accepted for inclusion in Division 09 – Finishes by an authorized administrator of University of NewHampshire Scholars' Repository. For more information, please contact nicole.hentz@unh.edu.Recommended CitationHickey, Sandra, "092900 - Gypsum Board" (2013). Division 09 – Finishes. 3.https://scholars.unh.edu/pdch_5_09/3UNIVERSITY of  NEW HAMPSHIRE    PLANNING, DESIGN AND CONSTRUCTION GUIDELINES January 25, 2013 CHAPTER 5 – TECHNICAL CONSTRUCTION AND RENOVATION STANDARDS GYPSUM BOARD 09 2900 - 1 SECTION 09 2900 - GYPSUM BOARD 1.1 SUMMARY A. Section Includes: 1. Interior gypsum board. 2. Exterior gypsum board for ceilings and soffits. 3. Tile backing panels. 4. Texture finishes. 1.2 SUBMITTALS A. LEED Submittals: 1. Product Data for Credit MR 4.1 and Credit MR 4.2:  For products having recycled content, documentation indicating percentages by weight of postconsumer and preconsumer recycled content.  Include statement indicating cost for each product having recycled content. 2. Product Certificates for Credit MR 5.1 and Credit MR 5.2:  For products and materials required to comply with requirements for regional materials, certificates indicating location of material manufacturer and point of extraction, harvest, or recovery for each raw material.  Include statement indicating distance to Project, cost for each regional material, and fraction by weight that is considered regional. 3. Product Certificates for Credit MR 5.1 and Credit MR 5.2:  For products and materials required to comply with requirements for regionally manufactured and regionally extracted and manufactured materials.  Include statement indicating cost for each regionally manufactured material. a. Include statement indicating location of manufacturer and distance to Project for each regionally manufactured material. b. Include statement indicating location of manufacturer and point of extraction, harvest, or recovery for each raw material used in regionally extracted and manufactured materials.  Indicate distance to Project and fraction by weight of each regionally manufactured material that is regionally extracted. 4. Product Data for Credit EQ 4.1:  For adhesives used to laminate gypsum board panels to substrates, documentation including printed statement of VOC content. 5. Laboratory Test Reports for Credit EQ 4:  For adhesives used to laminate gypsum board panels to substrates, documentation indicating that products comply with the testing and product requirements of the California Department of Health Services' "Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers." 6. Take-Back Plan:  Submit a certificate indicating that manufacturer of gypsum board has a corporate plan to take back gypsum scraps, or has a plan to purchase recycled gypsum powder and recycled paper for the production of gypsum board. UNIVERSITY of  NEW HAMPSHIRE    PLANNING, DESIGN AND CONSTRUCTION GUIDELINES January 25, 2013 CHAPTER 5 – TECHNICAL CONSTRUCTION AND RENOVATION STANDARDS GYPSUM BOARD 09 2900 - 2 1.3 PERFORMANCE REQUIREMENTS A. Fire-Resistance-Rated Assemblies:  For fire-resistance-rated assemblies, provide materials and construction identical to those tested in assembly indicated according to ASTM E 119 by an independent testing agency. B. STC-Rated Assemblies:  For STC-rated assemblies, provide materials and construction identical to those tested in assembly indicated according to ASTM E 90 and classified according to ASTM E 413 by an independent testing agency. C. Low Emitting Materials:  For ceiling and wall assemblies, provide materials and construction identical to those tested in assembly and complying with the testing and product requirements of the California Department of Health Services' "Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers." 1.4 GYPSUM BOARD, GENERAL A. Recycled Content of Gypsum Panel Products:  Provide the following levels of postconsumer recycled content and preconsumer recycled content:  1. Paper Faces:  Manufacture paper faces of gypsum board from 100% post-consumer recycled material. 2. Gypsum Powder:  Manufacture gypsum board using a minimum of 5% post-consumer, and 26% pre-consumer recycled gypsum powder. 3. Synthetic Gypsum:  Minimum 95% recycled content. 4. Steel Framing and Suspension Systems:  Provide steel framing and suspension system components with minimum 50% total recycled content. B. Regional Materials:  Gypsum panel products shall be manufactured within 500 miles (800 km) of Project site from materials that have been extracted, harvested, or recovered, as well as manufactured, within 500 miles (800 km) of Project site. 1.5 INTERIOR GYPSUM BOARD A. Manufacturers:    1. American Gypsum. 2. CertainTeed Corp. 3. Georgia-Pacific Gypsum LLC. 4. National Gypsum Company. 5. USG Corporation. B. Gypsum Board, Type X:  ASTM C 1396/C 1396M, 5/8 inch (15.9 mm) thick. C. Gypsum Ceiling Board:  ASTM C 1396/C 1396M, 1/2 inch (12.7 mm) thick. D. Abuse-Resistant Gypsum Board:  ASTM C 1629/C 1629M, Level 1. UNIVERSITY of  NEW HAMPSHIRE    PLANNING, DESIGN AND CONSTRUCTION GUIDELINES January 25, 2013 CHAPTER 5 – TECHNICAL CONSTRUCTION AND RENOVATION STANDARDS GYPSUM BOARD 09 2900 - 3 1. Core:  5/8 inch (15.9 mm), Type X. 2. Mold Resistance:  ASTM D 3273, score of 10. E. Moisture- and Mold-Resistant Gypsum Board:  ASTM C 1396/C 1396M.  With moisture- and mold-resistant core and paper surfaces. 1. Core:  5/8 inch (15.9 mm), Type X. 2. Mold Resistance:  ASTM D 3273, score of 10. 1.6 EXTERIOR GYPSUM BOARD FOR CEILINGS AND SOFFITS A. Exterior Gypsum Soffit Board:  ASTM C 1396/C 1396M, with manufacturer's standard edges. 1. Manufacturers:   a. American Gypsum. b. CertainTeed Corp. c. Georgia-Pacific Gypsum LLC. d. National Gypsum Company. e. USG Corporation. 2. Core:  5/8 inch (15.9 mm), Type X. B. Glass-Mat Gypsum Sheathing Board:  ASTM C 1177/C 1177M, with fiberglass mat laminated to both sides and with manufacturer's standard edges. 1. Products:   a. CertainTeed Corp.; GlasRoc Sheathing. b. Georgia-Pacific Gypsum LLC; Dens-Glass Gold. c. National Gypsum Company; Gold Bond, e(2)XP. d. USG Corporation; Securock Glass Mat Sheathing. 2. Core:  5/8 inch (15.9 mm), Type X. 1.7 TILE BACKING PANELS A. Glass-Mat, Water-Resistant Backing Board:  ASTM C 1178/C 1178M, with manufacturer's standard edges. 1. Products:   a. CertainTeed Corp.; GlasRoc Tile Backer. b. Georgia-Pacific Gypsum LLC; DensShield Tile Backer. 2. Core:  1/2 inch (12.7 mm), regular type. 3. Mold Resistance:  ASTM D 3273, score of 10. UNIVERSITY of  NEW HAMPSHIRE    PLANNING, DESIGN AND CONSTRUCTION GUIDELINES January 25, 2013 CHAPTER 5 – TECHNICAL CONSTRUCTION AND RENOVATION STANDARDS GYPSUM BOARD 09 2900 - 4 B. Cementitious Backer Units:  ANSI A118.9 and ASTM C 1288 or 1325, with manufacturer's standard edges. 1. Products:    a. CertainTeed Corp.; FiberCement Underlayment. b. Custom Building Products; Wonderboard. c. FinPan, Inc.; Util-A-Crete Concrete Backer Board. d. USG Corporation; DUROCK Cement Board. 2. Thickness:  1/2 inch (12.7 mm). 3. Mold Resistance:  ASTM D 3273, score of 10. C. Water-Resistant Gypsum Backing Board:  ASTM C 1396/C 1396M, with manufacturer's standard edges. 1. Manufacturers:   a. American Gypsum. b. CertainTeed Corp. c. Georgia-Pacific Gypsum LLC. d. USG Corporation. 2. Core:  1/2 inch (12.7 mm), regular type. 1.8 TRIM ACCESSORIES A. Interior Trim:  ASTM C 1047. 1. Material:  Galvanized or aluminum-coated steel sheet, rolled zinc, plastic, or paper-faced galvanized steel sheet. B. Exterior Trim:  ASTM C 1047. 1. Material:  Hot-dip galvanized steel sheet, plastic, or rolled zinc. C. Aluminum Trim:  Alloy and temper with not less than the strength and durability properties of ASTM B 221 (ASTM B 221M), Alloy 6063-T5.  1. Finish:  Corrosion-resistant primer compatible with joint compound and finish materials specified. 1.9 JOINT TREATMENT MATERIALS A. General:  Comply with ASTM C 475/C 475M. B. Joint Tape: 1. Interior Gypsum Board:  Paper. 2. Exterior Gypsum Soffit Board:  Paper. UNIVERSITY of  NEW HAMPSHIRE    PLANNING, DESIGN AND CONSTRUCTION GUIDELINES January 25, 2013 CHAPTER 5 – TECHNICAL CONSTRUCTION AND RENOVATION STANDARDS GYPSUM BOARD 09 2900 - 5 3. Glass-Mat Gypsum Sheathing Board:  10-by-10 glass mesh. 4. Tile Backing Panels:  As recommended by panel manufacturer. 1.10 AUXILIARY MATERIALS A. Laminating Adhesive:  Adhesive or joint compound recommended for directly adhering gypsum panels to continuous substrate. 1. Laminating adhesive shall have a VOC content of 50 g/L or less when calculated according to 40 CFR 59, Subpart D (EPA Method 24). B. Steel Drill Screws:  ASTM C 1002, unless otherwise indicated. 1. Use screws complying with ASTM C 954 for fastening panels to steel members from 0.033 to 0.112 inch (0.84 to 2.84 mm) thick. 2. For fastening cementitious backer units, use screws of type and size recommended by panel manufacturer. C. Sound Attenuation Blankets:  ASTM C 665, Type I (blankets without membrane facing) produced by combining thermosetting resins with mineral fibers manufactured from glass, slag wool, or rock wool. 1. Fire-Resistance-Rated Assemblies:  Comply with mineral-fiber requirements of assembly. 2. Recycled Content of Blankets:  Postconsumer recycled content plus one-half of preconsumer recycled content not less than 25 percent. D. Acoustical Joint Sealant:  Manufacturer's standard nonsag, paintable, nonstaining latex sealant complying with ASTM C 834.  Product effectively reduces airborne sound transmission through perimeter joints and openings in building construction as demonstrated by testing representative assemblies according to ASTM E 90. 1. Acoustical joint sealant shall have a VOC content of 250 g/L or less when calculated according to 40 CFR 59, Subpart D (EPA Method 24). a. Primer and its application to surfaces are specified in other Chapter 5, Division 09 Sections. END OF SECTION 09 2900 

092900 - Gypsum Board

https://scholars.unh.edu/cgi/viewcontent.cgi?article=1002&context=pdch_5_09

092900 - Gypsum Board

Abstract

Similar works

Full text

Available Versions

UNH Scholars' Repository