When the Department of Special Collections at the Syracuse University Library acquired the papers of Werner Seligmann, an architect and former Dean of the Syracuse University School of Architecture, the opportunity presented itself to develop a model storage system that could be applied to the other architectural drawings in the Department. While not large in comparison to these other collections, the Seligmann Papers were sizable enough to give us a better understanding of the storage issues involved if we decided to undertake the task of re-housing our other drawings. If such a task were to be undertaken, a new storage system would need to be compact, scalable, economical, and archivally sound. This paper describes the challenges, preservation, cost and space issues we addressed as well as the method of work we followed to house the Seligmann drawings

Davis, Carolyn

Olson, Debra

Verheyen, Peter D

English

Syracuse University Research Facility and Collaborative Environment

Syracuse University SURFACE Libraries' and Librarians' Publications Libraries 1-1-2003 Storage of Architectural Materials at the Syracuse University Library Peter D. Verheyen Syracuse University Carolyn Davis Syracuse University Debra Olson Syracuse University Follow this and additional works at: https://surface.syr.edu/sul  Part of the Archival Science Commons, Art and Materials Conservation Commons, Book and Paper Commons, and the Historic Preservation and Conservation Commons Recommended Citation Verheyen, Peter D.; Davis, Carolyn; and Olson, Debra, "Storage of Architectural Materials at the Syracuse University Library" (2003). Libraries' and Librarians' Publications. 3. https://surface.syr.edu/sul/3 This Article is brought to you for free and open access by the Libraries at SURFACE. It has been accepted for inclusion in Libraries' and Librarians' Publications by an authorized administrator of SURFACE. For more information, please contact surface@syr.edu. The Book and Paper Group Annual 22 (2003) 131ABSTRACTWhen the Department of Special Collections at theSyracuse University Library acquired the papers of WernerSeligmann, an architect and former dean of the SyracuseUniversity School of Architecture, the opportunity pre-sented itself to develop a model storage system that couldbe applied to the other architectural drawings in thedepartment. While not large in comparison to these othercollections, the Seligmann Papers were sizable enough togive us a better understanding of the storage issuesinvolved if we decided to undertake the task of rehousingour other drawings. If such a task were to be undertaken,a new storage system would need to be compact, scalable,economical, and archivally sound. This paper describes thechallenges, preservation, cost, and space issues weaddressed as well as the method of work we followed tohouse the Seligmann drawings.BACKGROUNDThe Syracuse University Library has a long history ofcollecting the papers, including drawings, of leading archi-tects. Notable among them are William Lescaze, MarcelBreuer, Pietro Belluschi, and Werner Seligmann. Thesepapers have increasingly attracted intense interest fromindividuals outside the University—owners of property,architectural historians, and museum curators to nameonly a few.The collections vary considerably in content, format,and physical condition (fig. 1). In addition to tracings,sketches, plans, blueprints and other reproductions, thecollections contain office records, consisting of corre-spondence, financial data, specifications, photographs, andprinted material. It is the oversized visual materials, thoseexceeding standard letter and legal formats, which havecaused the most concern, and frustration, to collectioncustodians at the Syracuse University Library.Architectural materials at the Syracuse University Libraryare stored by architect and then by the architect’s “jobnumber,” with the various forms of media kept together.While this is not ideal, especially with materials consid-ered by some to be “works of art on paper,” the size anduse of the collections make this the most practical way ofgrouping and storing them. The Library for years has housed plans and renderingsin flat storage files. As more large-scale material was addedsome years ago, it was necessary to turn to more space-efficient storage—hanging files in “Plan Hold” cabinets.Drawings and mediums of all sizes were aligned along oneedge in a large folder which was grasped by a metal clampwith wing-nuts to close it tightly. Each large hanging fold-er was hooked into a rack with the clamp. The rack thenslid in and out of the cabinet on small wheels allowingfolders to be retrieved (fig. 2).Awkward at best, and damaging to materials due to theclamping mechanism, this system was continued until theearly 1990s. A shift from one off-site storage facility toanother in the early 1980s proved how damaging the PlanHold approach is. The cabinets were shifted full, with theStorage of Architectural Materialsat the Syracuse University LibraryPETER VERHEYEN, CAROLYN DAVIS, & DEBRA OLSONReceived for publication Spring 2003. Fig. 1. Packed materials on shelfresult that they arrived in the new facility with the contentsin conditions ranging from still perfectly aligned toslumped on the base of the Plan Hold cabinet (fig. 3).However, the number of Plan Hold cabinets was finite andnew materials, arriving as rolls or in tubes (cardboard andmetal), were left as is. Meanwhile, use of these materialsincreased. New owners of historic homes and exhibitioncurators were requesting more and more material. Asmaterials were used, it became clear that it was extremelydifficult to return plans to the Plan Hold system, and thedecision was made to no longer return materials there. The same problem also occurred with materials intubes, which were often over-filled and rolled so tightlythat removal was very difficult, and reinserting impossible.As a result of these problems, plans were placed in largeoak-tag (a heavy, acid-free paper) folders, labeled, andstacked flat to a height of roughly six to eight inches ontables in the Special Collections stack area. Material storedvertically in tubes settles, crushing the lowest edges, withthe top edges being damaged when the tube is closed.Often the tubes were so tightly packed staff could not rollthe materials tightly enough to return them to the originaltubes. Initially materials were stored flat, as describedabove, but when available flat space ran short, we returnedto rolling the plans, allowing them to “loosen,” wrappedthe new rolls in oak-tag, labeled them, and stored themhorizontally on regular manuscript shelving. The two-shelfpass-through approach was used to provide support for theentire length of the roll. Handling a roll, of any diameter, isalso far easier than a large folder, and requires less physicaleffort because one can safely get one’s arms around it.The Book and Paper Group Annual 22 (2003)Current policies stipulate that itemsoriginating from the Plan Hold cabinets arenot returned there. If they come from atube, the plans may or may not be returnedto the original tube. While this approachmay be safer for the materials, it makes amockery of organizational and control sys-tems. Finding aids, which are tied to shelf,Plan Hold, or tube locations, can no longerbe relied upon. While interim lists of whatis “checked out” are available, a great dealof staff memory is required, memory whichresides in a limited number of individuals.Further attempts at control have focusedon preparing lists of plans belonging to aspecific project when it is requested. Thelong-term benefit of this sporadic invest-ment of time is that, once done, futurehandling is reduced. Early on, we realizedthat large-scale lists, such as item-levelinventories, while desirable, were impossi-ble, impractical, and unnecessary. Asidefrom the owners of buildings, projects seem not to be ofequal importance to historians and preservationists, withthose groups concentrating on well-known structures and“firsts,” such as design elements and materials.STORAGE METHODSPreservation concerns with this variety of architecturalmaterials include flaking media, abrasion, acid and alkalinemigration, and physical damage from handling. A point ofcontention in the debate over architectural records iswhether they are to be considered works of art on paper,which many certainly are, or simply “papers” in thearchival sense. Ideally, graphic materials should be storedflat in appropriate individual folders or mats and separatedby medium. Failing that option, roll storage, if properlydone, is the best alternative. While pressure on the bottomof the roll where it is in contact with the shelf may be aconcern, having the weight of the roll spread out along itsentire length reduces this pressure.THE WERNER SELIGMANN PAPERSThe Seligmann Papers, 1948–1998 (bulk 1955–1998),came to the Department in the summer of 2000 andincluded an extensive slide collection, models, presenta-tion boards, several boxes of photographs, specifications,competition programs, articles, newspaper clippings,reports, studies, and other items. Also included were sev-eral thousand drawings in approximately 230 cardboardtubes and bags, or in some cases, rolled with rubber bands.Blueprints, sepias, and original drawings on trace were132Fig. 2. Plan Hold cabinet Fig. 3. Damage from Plan Hold cabinetmixed together. All of this was not very dif-ferent from how other architecturalcollections were received.The task of identifying, sorting, describ-ing, and re-housing the papers wasundertaken by a faculty member from theSchool of Architecture and one manuscriptprocessor who was hired by the Library forthe project. Both worked part-time whilethe preservation and access librariandesigned the storage system, ordered sup-plies, and worked with Syracuse UniversityCentral Facilities to coordinate construc-tion of the units.Identifying, sorting, and describing thecontents of the 230 tubes took place overthe summer and fall of 2001 and rehousingthe materials, including transporting thetubes in batches to the remote storage facil-ity, started in December of 2001 and wascompleted in April of 2002.THE IDEAIdeally, graphic materials should be stored flat in indi-vidual folders or mats and separated by medium. Flat filesand folders for all the items proved too expensive andwould have required more floorspace than was available.The system designed for the Seligmann Papers is basedaround a tube within a tube (fig. 4). By rolling the materi-als around an inner tube, wrapping it with a protectiveenclosure, inserting it into a larger tube, and storing it hor-izontally, the materials are well protected, yet accessible foruse. These tube pairs are then nested within “boxes” hold-ing fifty-six tubes (for the vertical units).METHOD OF WORKWhile all tubes are acid-free, additional protection wasadded by wrapping the outside of the three-inch diameterinner tube with acid-free, buffered Permalife paper, andrerolling the drawings around the outside of the tube (fig.5). A sheet of Mylar, with Velcro coins to hold it closed,then wraps around the roll. For items which may receiveheavy use, a tie ribbon can be substituted as the Velcrocoins may separate from the Mylar with repeated openingand closing. In addition to keeping the materials on theroll, the wrappers also protect against abrasion incurred asrolls are removed and inserted into the outer tubes. Byrolling the materials around a three-inch diameter tube,one is able to get more material on the roll than one couldget inside, and still have it fit very comfortably into the six-inch diameter outer tube. As the collection is housed atthe remote storage facility, a work surface where materials133could be unrolled, viewed, and rerolled was also required.This was accomplished by laying a “box” on its side andattaching a work-surface (fig. 6).The large tubes are nestled together in a frameworkresembling a honeycomb, allowing for a high storage den-sity in a relatively small area. The vertical “boxes” holdfifty-six tubes, the horizontal “boxes” fifty-eight tubes. Forthe Seligmann Papers, this meant that four “boxes” wererequired, two vertical and two horizontal with top. Verticalunits require 36-inch width by 48-inch depth offloorspace, horizontal units 90-inch width by 48-inchdepth. The horizontal units incorporate a work-surfacecritical for viewing these oversized materials.CONSTRUCTION OF THE UNITSEach storage unit is constructed of three metal shelvingframes, 1 x 2s, and half-inch plywood (fig. 7). By reusingVerheyen, Davis, & Olson  Storage of Architectural MaterialsFig. 4. Tube-within tube storage Fig. 5. Tube-within-tube storage, detailFig. 6. Work surface on top of a storage unit on its sidesurplus library shelving frames, we were able to easilyensure a very rigid and stable frame and reduce overall con-struction costs. Appendix 2 depicts the working drawingsprepared by Syracuse University’s Central Facilities.In addition to building the “boxes,” Central Facilitiescut down the inner tubes by two inches so that the endcapswould fit into the larger tubes to protect against dust, andadhered the back caps to the tubes. With the units back tothe wall, it was essential that the caps could not be knockedout, as there would be no way to retrieve them save remov-ing all the tubes.NEXT STEPSBased on the success of the prototype, the decision wasmade to expand the tube storage units. During the Springof 2003, work began to rehouse architectural drawingsfrom the Breuer and Belluschi collections. These werehoused in thirty-three Plan Hold cabinets, each withtwelve hangers, for a total of 396 groupings of drawings.The actual number of drawings per grouping varied wild-ly. Added to that number are approximately two thousandtubes and folders with drawings and loose items from theseand other collections. Current storage was clearly inade-quate, with materials originally from one tube, or PlanHold grouping, scattered at different locations. The mostimmediate need was to rehouse the materials in the PlanHold cabinets, and reunite some of the scattered materialswith their “parent” tube. In beginning this second phase,we assumed a 1:1 transfer from the Plan Hold groupings tothe tubes, requiring the construction of seven additionalstorage units. The space available along the North wall ofthe Hawkins Building allowed for the construction of fif-teen units, in addition to the four already there, anadditional capacity of 444 tubes beyond the 396 tubesrequired for a total of 840 tubes. In order to store and transport materials within thelibrary a mobile mini-unit on casters is also being con-The Book and Paper Group Annual 22 (2003)structed. This unit will hold ten tubes, making it possibleto move them around as needed without undo effort, espe-cially when researchers request larger quantities ofmaterials.Staffing and logistical issues surrounding this projectwere critical. Logistical issues in constructing the new stor-age units included bringing in the raw materials andrehousing the drawings in a very cramped space. Based onthe experience with the prototype, final assembly of theunits will happened very quickly. Prior to clearing out thePlan Hold cabinets, the new storage units and tubes wereordered with delivery of the tubes in two batches. The PlanHold cabinets were then cleared out, and materials tem-porarily stored on shipping pallets, in a total of 1.5 days bythree full-time equivalent staff. The empty cabinets werethen removed before the new units arrived. SyracuseUniversity’s Central Facilities carpenters assembled thestorage units in their shop and delivered them to their finallocation in two batches. Tubes were precut to their finallength prior to shipping so that the back endcap could beattached immediately upon arrival and the tube pair nest-ed in the units. This process was needed, as storage spacefor this quantity of tubes is unavailable. During the SpecialCollection Research Center’s closure week in May, thematerials formerly stored in the Plan Hold cabinets wererehoused into the new units, the inventory updated andannotated, ensuring a higher level of access than previous-ly available, and tubes and endcaps labeled. An informalcondition survey was also done at this time. A librarian, aconservator, and an intern from the Museum StudiesProgram at Syracuse University completed this final phase.Based on the experiences gained during this phase, webelieve that further materials can be rehoused using onetrained staff member with assistance from an intern orwork-study student. With over half the tubes still empty, aschedule is being developed to systematically rehouse themany materials still in inadequate storage conditionsSUMMARYWhile the Werner Seligmann Papers are a relativelysmall collection, properly housing the architectural mate-rials posed the same set of challenges faced by the othercollections. The tube storage unit described here had tomeet four criteria. It had to be compact, scalable, econom-ical, and archivally sound. It met all four, and in doing soprovided the Syracuse University Library with invaluableexperience as it seeks to tackle many of the problems relat-ing to the use and storage of large quantities of architecturalmaterials. The second phase of this project affirmed thevalidity of the plan described.134Fig. 7. Overall view of tube-storage unitsPETER VERHEYENSpecial Collections Preservation and Access Librarian/Conservation LibrarianSyracuse University LibrarySyracuse, New Yorkpdverhey@syr.eduCAROLYN DAVISReader Services LibrarianSyracuse University LibrarySyracuse, New Yorkcadivi01@syr.eduDEBRA OLSONManuscripts Processor/Digital Projects AssistantSyracuse University LibrarySyracuse, New Yorkdgolson@syr.eduVerheyen, Davis, & Olson  Storage of Architectural Materials 135Page 136. Appendix 2APPENDIX 1: TABLE SHOWING COSTS FOR SUPPLIES (INCLUDING PART NUMBERS) AND LABOR136 The Book and Paper Group Annual 22 (2003)Fig. 8. Diagram of vertical and horizontal storage units Fig. 9. Overall dimensionsFig. 10. Vertical dimensionsFig.11. Horizontal dimensions Fig. 12. Construction detailAPPENDIX 2: CONSTRUCTION DIAGRAMSPrepared by Joseph Guadagnolo, Carpenter’s Shop, Syracuse University Central Facilities

Storage of Architectural Materials at the Syracuse University Library

https://surface.syr.edu/cgi/viewcontent.cgi?article=1002&amp;context=sul

Storage of Architectural Materials at the Syracuse University Library

Abstract

Similar works

Full text

Available Versions

Syracuse University Research Facility and Collaborative Environment