Patient-specific design of the right ventricle to pulmonary artery conduit via computational analysis

Abstract

Cardiovascular prostheses are routinely used in surgical procedures to address congenital malformations, for example establishing a pathway from the right ventricle to the pulmonary arteries (RV-PA) in pulmonary atresia and truncus arteriosus. Currently available options are fixed size and have limited durability. Hence, multiple re-operations are required to match the patients’ growth and address structural deterioration of the conduit. Moreover, the pre-set shape of these implants increases the complexity of operation to accommodate patient specific anatomy. The goal of the research group is to address these limitations by 3D printing geometrically customised implants with growth capacity. In this study, patient-specific geometrical models of the heart were constructed by segmenting MRI data of patients using Mimics inPrint 2.0. Computational Fluid Dynamics (CFD) analysis was performed, using ANSYS CFX, to design customised geometries with better haemodynamic performance. CFD simulations showed that customisation of a replacement RV-PA conduit can improve its performance. For instance, mechanical energy dissipation and wall shear stress can be significantly reduced. Finite Element modelling also allowed prediction of the suitable thickness of a synthetic material to replicate the behaviour of pulmonary artery wall under arterial pressures. Hence, eliminating costly and time-consuming experiments based on trial-and-error. In conclusion, it is shown that patient-specific design is feasible, and these designs are likely to improve the flow dynamics of the RV-PA connection. Modelling also provides information for optimisation of biomaterial. In time, 3D printing a customised implant may simplify replacement procedures and potentially reduce the number of operations required over a life time, bringing substantial improvements in quality of life to the patient