In this work, we report on Monte Carlo simulations of InP and GaN vertical Gunn diodes to optimize their oscillation frequency and DC to AC conversion efficiency. We show that equivalent operating conditions are achieved by the direct application of a sinusoidal AC voltage superimposed to the DC bias and by the simulation of the intrinsic device coupled with the consistent solution of a parallel RLC
resonant circuit connected in series. InP diodes with active region about 1 μm offer a conversion efficiency up to 5.5 % for frequencies around 225 GHz. By virtue of the larger saturation velocity, for a given diode length, oscillation frequencies in GaN diodes are higher than for InP structures. Current oscillations at frequencies as high as 675 GHz, with 0.1 % efficiency, are predicted at the sixth generation band in a 0.9 μm long GaN diode, corroborating the suitability of GaN to operate near the THz band. At the first generation band, structures with notch in general provide lower oscillation frequencies and efficiencies in comparison with the same structures without notch.However, a higher number of generation bands are originated in notched diodes, thus typically reaching larger frequencies. Self-heating effects reduce the performance, but in GaN diodes the efficiency is not significantly degraded.ROOTHz project (FP7-243845
