Experimental results of two-phase ejector operation with refrigerant R134a as working fluid are presented in this paper. The tests carried out allowed evaluating the influence of the primary nozzle position in the mixing chamber and of operating conditions such as the thermodynamic state of the fluid at the inlet and outlet of the ejector. Various positions of the primary nozzle were tested and the operating conditions ranges were: primary inlet pressure 8.8-14.9 bars, subcooling 0.2-5 °C and ejector outlet pressure 3.7-4.7 bars. The tests have shown an optimal position of the primary nozzle (NXP=38.1 mm) in the ejector but this position was not very sensitive to operational conditions. The performance of the ejector dropped sharply when the nozzle was placed right at the inlet of the constant-area section in the mixing chamber. Pressures at the primary inlet and outlet had a limited impact on the entrainment ratio (<10%), but it was found that the level of subcooling at the inlet of the primary flow had an important influence on the entrainment ratio with a variations of about 66%. Pressure monitoring inside the ejector showed a strong relation between NXP and pressure variations in the mixing section and the diffuser
