Belgrade : Institute for Multidisciplinary Research, University of Belgrade
Abstract
Commercial Mn-Zn ferrite powder was milled in a planetary ball mill for 30-240 minutes. Particle size distribution in the milled powders was analyzed using a laser particle size analyzer and correlated with XRD and SEM analysis of the milled powders. Green disc and torroid samples were sintered in air in the temperature interval 800 -1300oC for 2 hours. SEM/EDS, AFM/MFM analysis of the sintered samples and measurements of their electrical properties such as DC resistance up to 500 MHz enabled establishment of a correlation between the microstructure and properties in the high-frequency range
